Lexicon Rv5 User Manual

RV-5Setup
3-25
          
Incoming DOLBY 
DatastreamDolbyDTSLogic 7DSPStereo
Dolby Digital 1.0
VS 2-SP REF & WIDE
DOLBY DIGITAL
DOLBY D STEREO
Logic 7 7CH FILM
Logic 7 7CH MUSIC
Logic 7 5CH FILM
Logic 7 5CH MUSIC
Dolby Digital 2.0PLIIx Film, Music, & Game 
PLII Film, Music, & Game
Pro Logic
VS 2-SP REF & WIDE
VS 3-SP REF & WIDE
VS 4-SP WIDE
VS 5-SP WIDE
DOLBY DIGITAL
Dolby Digital 4.1PLIIx Film & Music
Digital EX
DOLBY DIGITAL
DOLBY D STEREO
VS 2-SP REF &  WIDE
VS 4-SP WIDE
Dolby Digital 5.0D+PLIIX Film...

SetupLexicon
3-26
Incoming DTS 
DatastreamDolbyDTSLogic 7DSPStereo
DTS 5.1 MATRIX
DTS+PLIIx Film & Music*
*These modes are only
available when a DTS source is
playing and the Dolby Mode
Family button is pressed on
the remote.DTS-ES MATRIX
DTS
DTS STEREO
Logic 7 7CH FILM
Logic 7 7CH MUSIC
Logic 7 5CH FILM
Logic 7 5CH MUSICDTS 96/24DTS 96/24
DTS 96/24 ST
DTS NEO:6
DTS 6.1 DISCRETEDTS-ES DISCRETE
DTS
DTS STEREO
DTS 5.1 and
DTS 20-bit 5.1 ch CD
DTS NEO:6
DTS
DTS STEREO
Incoming ANALOG...

RV-5Setup
3-27
LISTENING MODE DESCRIPTIONS
The following table provides a brief description of each listening mode.
Logic 7 Film   
Logic 7 MusicA proprietary Lexicon technology, Logic 7 is an advanced mode that extracts the maximum surround information from either surround-encoded pro-
grams or conventional stereo material. Film 7.1 and Music 7.1 are tailored specifically for use with rear speakers, while Film 5.1 and Music 5.1 are spe-
cifically formatted for use without rear speakers.  The Film modes...

SetupLexicon
3-28
DTS Neo:6 Cinema
DTS Neo:6 MusicThese two modes are available when any analog source is playing to create a three-channel, five-channel, or six-channel surround presentation from
conventional Matrix-encoded and traditional Stereo sources.  Select the Cinema version of the Neo:6 when a program with any type of Matrix
surround encoding is present.  Select the Music version of Neo:6 for optimal processing when a non-encoded, two-channel stereo program is being
played.
DTS Neo:6
The DTS...

RV-5Setup
3-29
5.1-CHANNEL & 7.1-CHANNEL DIRECT INPUTS
There are four listening modes available for use with surround
sources such as DVD-Audio, SACD, HD-DVD, or Blue-ray players.
These listening modes are for use when the RV-5 8-channel direct
inputs are in use. We recommend you use these listening modes
under the following conditions:
 5.1-CH BYPASS - Use this listening mode when the Rear L/R
inputs are NOT in use and the input source device has its own
internal bass management system. The incoming...

SetupLexicon
3-30
SURROUND CONFIGURATION
Selecting the SETUP menu SURROUND CONFIG option opens the Surround Configuration menu, which is used to customize the list of available
listening modes that can be applied to incoming signals.  Each Mode Family has a subset of available listening modes that can be turned off.  If the
listening mode is set to OFF, then the applicable listening modes in that family are not available for selection from the mode buttons.  If the listening
mode is ON, then the...

RV-5Setup
3-31
LOGIC 7 DEFAULTOFF, ON
Allows the user to choose Logic 7 as the default surround mode for
all incoming audio signals.  If this parameter is OFF, then the RV-5
selects the native format of the incoming signal as the default
listening mode. If set to ON, then all incoming audio signals are
defaulted to the Logic 7 listening modes. 
Setting the Logic 7 Default to ON does not prevent other listening
modes from being available through the Mode buttons.  Selecting
the DOLBY, DTS, DSP, or STER...

SetupLexicon
3-32
DOLBY CONFIGURATION
Selecting the SETUP menu DOLBY CONFIG option opens the Dolby Configuration menu, which is used to configure the Dolby surround modes for
optimum performance. 
Note: The Dolby Configuration only applies to the Dolby PLII Music and 
Dolby PLIIx Music listening modes. The Dolby Pro Logic IIx mode requires 
a 7.1-channel configured system.
MODEPLII, PLIIx
Selects the MODE parameter, which chooses between the Dolby PLII 
Music and Dolby PLIIx Music listening modes.
CENTER...

RV-5Setup
3-33
MUTE LEVELS
Selecting the SETUP menu MUTE LEVELS option opens the Mute
Levels menu, which is used to adjust the mute levels of both the Main
Zone and Zone 2 audio outputs.
MAIN ZONEFULL, -10, -20, -30, -40dB
Allows you to choose different levels of attenuation for Main Zone
audio muting.  The FULL setting completely mutes the box.  The
other available settings perform incremental muting.  
ZONE 2FULL, -10, -20, -30, -40dB
Allows you to choose different levels of attenuation for Zone 2...

SetupLexicon
3-34