Lexmark C760 Service Manual

Diagnostic information2-15
  5060-4xx
2xx Paper Jams
User primary 
message User secondary 
message
Explanation
200 Paper Jam 
Clear Paper Path Leave sheets in 
Finisher area 5Primary: This message indicates that a paper jam has 
occurred at or near the printer Input Sensor. Open the 
printers left door (Paper Jam Removal Door) to access the 
jammed media. 
Secondary: If sheets have been accumulated to be stapled 
when the jam is detected, the printer alternately flashes the 
primary and secondary...

2-16Service Manual
5060-4
xx   
230 Paper Jam 
Clear Paper Path Leave Job in 
Finisher area 5Primary: Paper has most likely jammed in the duplex option. 
Remove the duplex tray to access the jam.
Secondary: If sheets have been accumulated to be stapled 
when the jam is detected, the printer alternately flashes the 
primary and secondary messages indicating the 
accumulated sheets should not be removed during jam 
clearing. 
Note
: When the secondary message is displayed, if the 
accumulated sheets are...

Diagnostic information2-17
  5060-4xx
272 Paper Jam 
Clear Paper Path Leave Job in 
Finisher area 5Primary: Media is jammed in the 5-Bin Mailbox Option. 
Open the rear door of option to access the jammed media.
Secondary: If sheets have been accumulated to be stapled 
when the jam is detected, the printer alternately flashes the 
primary and secondary messages indicating the 
accumulated sheets should not be removed during jam 
clearing. 
Note
: When the secondary message is displayed, if the...

2-18Service Manual
5060-4
xx   
Sub error code table
Use this table to troubleshoot the printer when 9xx and 2 xx Error Codes are displayed.
When a 9 xx or 2 xx error code is displayed, press and hold  Return and press  Select to view the Sub error code.
Sub error code Explanation
2D 00 No media available in duplex option.
2D 01 Leading edge of image position has reached image halt location.
2D 02 Paper jam detected. Sensor S2 was activated at an unexpected time.
2D 03 Paper jam detected. Sensor S2 was...

Diagnostic information2-19
  5060-4xx
2D 1D Fuser exit sensor obstructed.
2D 1E Duplex sensor(s) obstructed.
2D 1F Tray 2 sensor obstructed.
2D 20 Tray 3 sensor obstructed.
2D 21 Tray 4 sensor obstructed.
2D 22 Pass thru sensor in Stacker 1 obstructed.
2D 23 Pass thru sensor in Stacker 2 obstructed.
2D 24 Pass thru sensor in Stacker 3 obstructed.
2D 25 Pass thru sensor in Stacker 4 obstructed.
2D 26 Pass thru sensor in Stacker 5 obstructed.
2D 27 Pass thru sensor in Stacker 6 obstructed.
2D 28 Paper jam...

2-20Service Manual
5060-4
xx   
2D 3E Tray 4 pick motor stall error detected.
2D 3F Tray 4 pick motor PWM error detected.
2D 40 Tray 4 pick motor Encoder error detected.
2D 41 Tray 4 feed motor stall error detected.
2D 42 Tray 4 feed motor PWM error detected.
2D 43 Tray 4 feed motor encoder error detected.
2D 44 Registration (staging) Motor stall error detected when picking media from the MPF.
2D 45 Autocompensator motor stall error detected when picking media from the MPF.
2D 46 Autocompensator motor...

Diagnostic information2-21
  5060-4xx
Understanding the printer operator panel
The operator panel has five buttons, a display, and a light that flashes when the printer is processing a job 
indicated by the  Busy message.
Operator panel buttons
See the menu map for a brief overview of the printer menus available from the operator panel.Button Function
Go
Press Go to:
 Return to the Ready state if the printer is offline (the  Ready message does not 
appear on the display).
 Exit printer menus and...

2-22Service Manual
5060-4
xx   
Select a menu or menu item for more details.
Pap er Menu
Paper Source
Paper S ize
Paper Type
Custom Types
Output Bin
Configure Bins
Overflow Bin
Assign Type/Bin
Substitute Size
Configure MP
Paper Texture
Paper Weight
Paper Loading
Universal Setup Supplies Menu
 Toner
Oiler
Wa ste Bot tle
Finishing Menu
Duplex
Duplex Bind
Copies
Blank Pages
Collation
Separator Sheets
Separator Source
Hole Punch
Offset Pages
Staple Job
Staple Prime Src
Multipage Print
Multipage Order...

Diagnostic information2-23
  5060-4xx
Color Menu
Use the Color Menu to adjust print quality and customize color printing.
Note:  Values marked by an asterisk (*) are the factory default settings.
Menu Item Purpose Values
Color Adjust To manually recalibrate the color 
conversion tables, adjusting for variations 
in output that can occur as a result of 
changing conditions, such as room 
temperature or humidity. No selections exist for this operation.
Pressing 
Select initiates this operation.
Color...

2-24Service Manual
5060-4
xx   
Color Saver To conserve toner. If selected, this setting 
overrides Toner Darkness settings. Off*
Prints using Toner Darkness setting.
On Applies a lower Toner Darkness level.
Toner Darkness setting is ignored.
Manual Color To let users customize the RGB or CMYK 
color conversions applied to each object 
on the printed page. Color conversion of 
the data specified using RGB 
combinations can be customized based 
on object type (text, graphics, or image). RGB Image
sRGB...