Lexmark C760 Service Manual
Have a look at the manual Lexmark C760 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Repair information4-85 5060-4xx 20.Plug web oiler cable into web oiler card connector (M). Plug web oiler drive assembly cable into cable connector (N). Note: Make sure the cables from the drive assembly are routed along the lower frame and are not in contact with the drive assembly gears. 21.Reinstall paper path access door. 22.Align tabs on the front right light shield with the slots (O) on the frame. MN
4-86Service Manual 5060-4 xx 23.Move the front right light shield up until alignment stud (P) and the screw hole (Q) are aligned. 24.Attach the new fuser web oiler fuser housing (R) to the new web oiler fuser. 25.Insert the web oiler fuser assembly into the fuser assembly and install the fuser assembly into the printer. PQ R
Connector locations5-1 5060-4xx 5. Connector locations Locations Printer boards
5-2Service Manual 5060-4 xx Printer motors Fuser fan RIP fan Pick asm motor ITU drive motor Fuser drive motor and card VTB fan Yellow carriagedrive motor Black carriagedrive motor Magenta carriage drive motor Registration drive motor BOR drive motorWeb oiler drive motor (optional) Cyan carriage drive motor Printheads
5-4Service Manual 5060-4 xx Cartridge contact assembly pin locations (cyan, magenta and yellow)
Connector locations5-5 5060-4xx Cartridge contact assembly pin locations (black)
5-6Service Manual 5060-4 xx Connectors System board - non-network
Connector locations5-7 5060-4xx System board - network
5-8Service Manual 5060-4 xx System board See “System board - non-network” on page 5-6 or “System board - network” on page 5-7 . Connector Pin no. Signal J1 USB Port G1 Ground 1 USB +5 V dc 2 USB D- 3 USB D+ 4 Ground G2 Ground J2 Top Options Connector Bin Full 1 Printer TXD 2 Ground 3 Ground 4 Printer RXD 5 +24V_OPTIONS (through fuse F11) 6 Ground 7 +5V_OPTIONS (through fuse F9 8 +5V_BIN_FULL (switched) 9 Ground 10 BIN_FULL_IN J3 RIP fan 1 FAN3_STALL_IN 2 Ground 3 FAN3_CNTRL- 4 +24V_LEFTSIDE 5N/C J4 BOR lift motor 1 LIFT_OUT- (+24 V dc in standby) 2 LIFT_OUT+ (+24 V dc in standby) J5 Web Oiler Motor 1 +5V dc (through fuse F8) 2 OILER_CURR_SEL_A 3 OILER_CURR_SEL_B 4 OILER_PHASE_A 5 OILER_PHASE_B 6 Ground 7 +24V_LEFTSIDE J6 Operator panel 1 BUF_I2CDATA 2 +5V dc (through fuse 8) 3 BUF_I2CCLK 4 Ground 5 OP-Panel Interrupt (Active line)