LG 15ls1r Owners Manual

31
ENGLISH
Other functions
TV, AV and PC modes
Press the INPUTbutton and then D
D 
 / E
E 
 button to select desired
mode.
Inputs can be set for TV, AV or PC mode. AV mode is used when a
video cassette recorder (VCR), or other equipment is connected to
the set.
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the ‘Connection of external equipment’ sec-
tion.
15LS1R
*/15LC1R
*: TV, AV 1, AV2,RGB (RGB [DTV], RGB [PC]).
20LS1R
*/20LC1R
*: TV, AV1, AV2.
20LS2R
*/ 23LS2R
*:...

32
- This feature is not available in all countries.
Teletext (or TOP text) is an optional function, therefore only a set with
the teletext system can receive the teletext broadcast.
Teletext is a free service broadcast by most TV stations which gives up-
to-the-minute information on news, weather, television programmes,
share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FAS-
TEXT systems. SIMPLE (standard teletext) consists of a number of
pages which are...

33
ENGLISH
Teletext
TOP text
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
Block / group / page selection1.  With the blue button you can progress from block to block.
2.  Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing page with automatic overflow to the next
group....

34
You can connect additional equipment, such as VCRs, camcorders
etc. to your set. Examples are shown below.
Note:Here shown may be somewhat different from your set.
Aerial socket
1.  Connect the RF out socket of the VCR to the aerial socket of
the set.
2.  Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the ‘Manual programme tuning’section.
4.  Select the programme number where the VCR channel is
stored.
5. Press the...

35
ENGLISH
Connection of external equipment
S-Video/Audio in sockets (S-Video) 
When connecting an S-VIDEO VCR to the S-VIDEOsocket, the
picture quality will be further improved.
1. Connect the S-Video socket of the VCR to the S-VIDEOsocket
of the set.
2. Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
3. Press the INPUTbutton to select AV 2.
4. Press the PLAYbutton on the VCR.
The VCR playback picture appears on the screen.
DVD input sockets
Euro scart socket1.  Connect the...

36
DTV in sockets 
RGB in socket (15LS1R
*/15LC1R
*/ 20LS2R
*/ 23LS2R
*)
1.  Connect the SET TOP with the D-Sub output socket to RGB
(PC/DTV) INsocket on the set and audio cable of the SET TOP
to the AUDIO (RGB) IN(15LS1R
*/15LC1R
*) or AUDIO
(RGB/DVI) IN(20LS2R
*/ 23LS2R
*).
2. Press the INPUTbutton to select RGB (or RGB [DTV])
(576p/480p) - 15LS1R
*/15LC1R
*, (480p/576p/720p/1080i) -
20LS2R
*/ 23LS2R
*.
Component sockets (20LS2R
*/ 23LS2R
*)
1.  Connect the SET TOP outputs to the COMPONENT (DVD/DTV)...

37
ENGLISH
Connection of PC
PC in socket 
RGB in socket (15LS1R
*/15LC1R
*/ 20LS2R
*/ 23LS2R
*)
1.  Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
2.  Connect the audio cable from the PC to the AUDIO (RGB) IN
(15LS1R
*/15LC1R
*) or AUDIO (RGB/DVI) IN(20LS2R
*/
23LS2R
*) sockets of the set.
3. Press the INPUTbutton to select RGB (or RGB [PC]).
4. Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC...

38
Connection of PC
PC Setup
You can adjust auto configure, manual configure and reset as you
prefer.
1. Press the INPUTbutton and then 
D
D 
 / E
E 
 button to select the
RGB [PC].
2. Press the MENUbutton and then 
D
D 
 / E
E 
 button to select the
Screen menu.
3. Press the 
G Gbutton and then D
D 
 / E
E 
 button to select the desired
screen function.
4. Make appropriate adjustments.
Auto configureThis function is for the automatic adjustment of the screen posi-
tion, clock and phase. The displayed...

39
ENGLISH
Connection of PC
Selecting wide XGA mode 
To see a normal picture, match the resolution of RGB mode and
selection of XGA mode.
1. Press the MENUbutton and then 
D
D 
 / E
E 
 button to select the
Screenmenu.
2. Press the 
G Gbutton and then D
D
/E Ebutton to select XGA mode.
3. Press the 
G Gbutton and then D
D
/E Ebutton to select the desired
XGA resolution.
4. Repeatedly press the 
MENUbutton to return to normal TV
viewing.
Note:This feature is not available for all models.
Screen
DE  F GOK...

40
Picture format
You can watch TV in various picture formats; Spectacle, Original,
4:3, 16:9, 14:9, Zoom1, Zoom2.
Repeatedly press the ARC button to select your desired picture 
format.
Spectacle
When your TV receives the wide screen signal, it will lead you to
adjust the picture horizontally, in a nonlinear proportion, to fill the
entire screen.
Original
When your TV receives the wide screen signal, it will be automatically
changed to the picture format to be sent.
(Not available in all countries)
4:3...