LG 19le3400 Owners Manual

							
3
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI CABLE
NOTE
 
► The TV can receive video and audio signals simultaneously when 
using an HDMI cable.
 
► If the DVD does not support Auto HDMI, you must set the output reso-
lution appropriately.
 
► Check that your HDMI cable is High Speed HDMI Cable. If the HDMI 
cables are not High Speed HDMI Cable, flickering or no screen dis-
play can result. Please use the High Speed HDMI Cable.
1Connect the HDMI output of the external equipment (digital set-
top box, DVD, etc.) to  HDMI/DVI IN 1, HDMI IN 2  (Except for 
19/22LD3 ***), 
HDMI IN 3  (Except for 19/22/26/32LD3
***, 
32/37/42/47LD4 ***, 19/22LE3
***, 22LE5
***) or 
HDMI IN 4  (Only 
32LE3 ***, 32/37/42LE4
***, 32/37/42/47/55LE5
***)
 jack on the 
TV.
2Turn on the external equipment. 
( Refer to the external equipments manual for operating instruc-
tions.)
3Select  HDMI1, HDMI2  (Except for 19/22LD3
***)
, HDMI3 
(Except for 19/22/26/32LD3 ***, 32/37/42/47LD4
***, 
19/22LE3 ***, 22LE5
***)
 or  HDMI4  (Only 32LE3
***, 
32/37/42LE4 ***, 32/37/42/47/55LE5
***) input source using the 
INPUT  button on the remote control.
    
1
 
						

							
4
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI TO DVI CABLE
1Connect the digital set-top box or the DVI out-
put of the PC to HDMI/DVI IN 1 jack on the 
TV.
2Connect the audio output of the digital set-top 
box or the PC audio output to the  AUDIO IN 
(RGB/DVI)  jack on the TV.
3Turn on the digital set-top box or the PC and 
the TV. 
(
Refer to the digital set-top box or the PC 
manual for operating instructions.)
4Select HDMI1  input source using the  INPUT 
button on the remote control.
    
12
or
 
						

							
5
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A EURO SCART CABLE
ScartInput Output
Video Audio RGB Video, Audio
AV 1OOOAnalogue TV, Digital TV
                Output Type 
Current 
input mode
l
AV 1
(TV Out) AV 1(When DTV scheduled recording is in 
progress using recording equipment.)
Digital TV Digital TVO
Analogue TV, AV Analogue TVO
(The input mode is converted 
to DTV.)Component/RGB Analogue TV
HDMI Analogue TV
NOTE 
 
►  Any Euro scart cable used must be signal shielded.
 
►   TV Out : Outputs Analogue TV 
or Digital TV signals.
1Connect the Euro scart socket of the external 
equipment (DVD, VCR, etc.) to the  AV 1 Euro 
scart socket on the TV.
2Turn on the external equipment. 
(Refer to the external equipments manual for 
operating instructions.)
3Select AV 1  input source using the  INPUT but-
ton on the remote control.
    
1
 
						

							
6
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
USB SETUP
1Connect the USB device to the USB IN jack 
on the TV.
2After connecting the  USB IN jack, you use the 
USB  function. (
► p.52) 
    
CONNECTING WITH A RF CABLE
To avoid picture noise (interference), allow adequate distance between \
the VCR and TV.
1Connect the  ANT OUT socket of the VCR to 
the  ANTENNA IN  socket on the 
TV.
2 
Connect the antenna cable to the  ANT IN 
socket of the VCR.
3Press the  PLAY button on the VCR and match 
the appropriate channel between the TV and 
VCR for viewing.
    Wall Jack
Antenna
1
2
1or
 
						

							
7
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A RCA CABLE
NOTE
 
► If you have a mono VCR, connect the audio cable 
from the VCR to the  AUDIO L/MONO jack of the 
TV.
1Connect the  AUDIO/VIDEO  jacks between TV 
and VCR or external equipment. Match the 
jack colours (Video = yellow, Audio Left = 
white, and Audio Right = red)
2Insert a video tape into the VCR and press 
PLAY on the VCR.  (
Refer to the VCR owner’s 
manual. )
 
Or, Operate the corresponding external equip-
ment. 
(Refer to external equipment operating guide.)
3Select AV 2 input source using the  INPUT but-
ton on the remote control. 
If connected to  AV IN 3, select  AV 3 input 
source.
    
1
Camcorder Video Game Set
or
1
Camcorder
Video Game Set
or
or
 
						

							
8
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A D-SUB 15 PIN CABLE
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TVs set-
tings. 
1Connect the RGB output of the PC to the RGB 
IN (PC)  jack on the TV.
2Connect the PC audio output to the  AUDIO IN 
(RGB/DVI)  jack on the TV. 
3Turn on the PC and the TV
4Select RGB input source using the INPUT but-
ton on the remote control.
    
21
 
						

							
9
EXTERNAL EQUIPMENT SETUP
HEADPHONE SETUP
You can listen the sound through the headphone.
NOTE
 
► AUDIO menu items are disabled when connecting a headphone.
 
► When changing AV MODE with a headphone connected, the change is applied to video but no\
t to audio.
 
► Optical Digital Audio Out is not available when connecting a headphone.
 
► Headphone impedance: 16  Ω 
 
► Max audio output of headphone: 10 mW to 15 mW
1Plug the headphone into the headphone socket.
2To adjust the headphone volume, press the  
+ or - button. If you press the MUTE button, 
the sound from the headphone is switched off.
    
INSERTION OF CI MODULE
To view the encrypted (pay) services in digital TV mode.
This feature is not available in all countries.
NOTE
 
► Check if the CI module is inserted into the PCMCIA card slot 
in the right direction. If the module is not inserted properly, 
this can cause damage to the TV and the PCMCIA card slot.
1Insert the CI Module to  PCMCIA (Personal 
Computer Memory Card International 
Association)  CARD SLOT  of TV as shown.
  For further information, see p.34.
    
A V  IN  2
L /M ONO
R
AU DIO
V ID EO
H DM I IN  2
U SB IN
H /P
Check this point as 
shown and insert the CI 
Module. 
 
						

							
10
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, \
connect the OPTICAL 
DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 
  CAUTION
 
►   Do not look into the optical output port. Looking at the laser 
beam may damage your vision.
1Connect one end of an optical cable to the TV 
Digital Audio  (
Optical )
 Output port.
2  Connect the other end of the optical cable to 
the digital audio  (
Optical )
 input on the audio 
equipment.
3Set the “TV Speaker option - Off ” in the 
AUDIO menu.(
►p.112). Refer to the external 
audio equipment instruction manual for opera-
tion.
    1
2
 
						

							
11
EXTERNAL EQUIPMENT SETUP
1 
Connect the Wireless Media Box to the 
WIRELESS CONTROL jack and HDMI/DVI IN 
1 ,  HDMI IN 2  (Except for 19/22LD3
***), 
HDMI 
IN 3  (Except for 19/22/26/32LD3
***, 
32/37/42/47LD4 ***, 19/22LE3
***, 22LE5
***) or 
HDMI IN 4  (Only 32LE3
***, 32/37/42LE4
***, 
32/37/42/47/55LE5 ***) jack on the TV. 
EXTERNAL EQUIPMENT WIRELESS CONNECTION
(Only 32/42/46/52/60LD5
***, 32LE3
***, 32/37/42LE4
***, 32/37/42/47/55LE5
***)
You can connect between TV and external equipment wirelessly. 
For further information, refer to the “LG 
Wireless Media Box” manual for operating instructions.
LG Wireless Media Box
 
						

							
12
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode
SUPPORTED DISPLAY RESOLUTION
ResolutionHorizontal 
Frequency(kHz) Vertical 
Frequency(Hz)
720x400 31.468 70.08
640x480 31.469 59.94
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768 47.78 59.87
1360x768 47.72 59.80
1280x1024 63.981 60.02
1920x1080
(RGB-PC) 66.587 59.93
1920x1080 (HDMI-PC) 66.587 59.93
Resolution
Horizontal 
Frequency(kHz) Vertical 
Frequency(Hz)
720x480 31.469
31.5 59.94
60
720x576 31.25 50
1280x720 37.5
44.96/45 50
59.94/60
1920x1080 33.72/33.75
28.125
26.97/27
33.716/33.75 56.25
67.43/67.5 59.94/60
50
23.97/24
29.976/30.00 50
59.94/60
NOTE
 
► Avoid keeping a fixed image on the set’s screen 
for  prolonged periods of time. The fixed image 
may become permanently imprinted on the 
screen; use a screen saver when possible.
 
► There may be interference relating to resolution, 
vertical pattern, contrast or brightness in PC 
mode. Change the PC mode to another resolution 
or change the refresh rate to another rate or 
adjust the brightness and contrast on the menu 
until the picture is clear. If the refresh rate of the 
PC graphic card can not be changed, change the 
PC graphic card or consult the manufacturer of 
the PC graphic card.
 
► The synchronization input waveform for Horizontal 
and Vertical frequencies are separate.
 
► We recommend using 1920x1080, 60 Hz(Except 
for 19/22/26LD3
***, 26/32LD32
**, 32LD34**, 
19/22/26/32LE3 ***, 26/32LD33
**), 1360x768, 60 
Hz(Only 19/22/26LD3 ***, 26/32LD32
**, 32LD34**, 
19/22/26/32LE3 ***, 26/32LD33
**) for the PC 
mode, this should provide the best picture quality.
 
► Connect the signal cable from the monitor output 
port of the PC to the RGB (PC) port of the TV or 
the signal cable from the HDMI output port of the 
PC to the HDMI IN (or HDMI/DVI IN) port on the 
TV.  
► Connect the audio cable from the PC to the Audio 
input on the TV. (Audio cables are not included with 
the TV).
 
► If using a sound card, adjust PC sound as required.
 
► If the graphic card on the PC does not output ana-
logue and digital RGB simultaneously, connect only 
one of either RGB or HDMI IN (or HDMI/DVI IN) to 
display the PC output on the TV.
 
► If the graphic card on the PC does output analogue 
and digital RGB simultaneously, set the TV to either 
RGB or HDMI; (the other mode is set to Plug and 
Play automatically by the TV.)
 
► DOS mode may not work depending on the video 
card if you use an HDMI to DVI cable.
 
► If you use too long an RGB-PC cable, there may be 
interference on the screen. We recommend using 
under 5m of cable. This provides the best picture 
quality.
(Except for 19/22/26LD3
***, 26/32LD32
**, 32LD34
**, 19/22/26/32LE3
***, 26/32LD33
**)