LG 19lv2300 Owners Manual

21
ENGENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security system (This feature is
not available for all models.)
 yImage shown may differ from your TV.
The Kensington security system connector is 
located at the rear of the TV. For more information 
of installation and using, refer to the manual 
provided with the Kensington security system or 
visit http://www.kensington.com.
Connect the Kensington security system cable 
between the TV and a table.
Mounting on a wall
Attach a wall mount...

22
ENGENGLISH
ASSEMBLING AND PREPARING
Make sure to use screws and wall mount 
bracket that meet the VESA standard. Standard 
dimensions for the wall mount kits are described in 
the following table.
Model42PT25**42/50PT35**50PV35**50PZ25**42/50PW45**50PZ55**42/50PT45**
60PV25**60PZ25**60PZ55**
VESA (A x B)400 x 400600 x 400
Standard screwM6M8
Number of screws44
Wall mount bracketPSW400B, PSW400BG, DSW400BG
PSW600B, PSW600BG
Model22LK33**19/22/26LV25**22/26LV55**19/22LV23**...

23
ENGENGLISH
ASSEMBLING AND PREPARING
(Only 26/32LK33**, 32/37/42LK43**, 
32/37/42LK45**,  32/42/47LK53**, 32/42LK55**)
1 Gather and bind the cables with the cable 
management clip. 
2 Fix the cable management clip firmly to the TV.
 yDo not move the TV by holding the 
cable management clip, as the cable 
management clip may break, and injuries 
and damage to the TV may occur.
NOTE
(Only 22LK33**, 19/22/26LV25**, 22/26LV55**, 
19/22LV23**)
Cable Management Clip
Cable Holder
2 Gather and bind the cables...

24
ENGENGLISH
ASSEMBLING AND PREPARING
Positioning your display
Adjust the position of the panel in various ways for 
maximum comfort.
• Tilt range
Connection of TV
DC Adapter
1 Connect the antenna cable to the antenna 
input port on the TV.
2 Connect the DC adapter plug to the power 
input jack on the TV.
3  
Connect the power cord to the DC adapter first, 
then plug the power cord into the wall power 
outlet.
 yImage shown may differ from your TV.
(Only 19/22/26LV25**, 22/26LV55**, 19/22LV23**)
(Only...

25
ENGENGLISH
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote c\
ontrol. 
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching 
 and  ends to the label inside the compartment, and close the battery cover. Be 
sure to point the remote control to the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
 yDo not mix...

26
ENGENGLISH
REMOTE CONTROL
 + -Adjusts the volume level.
MARKSelects a menu or option.
FAV (See p.38)Accesses your favourite programme list.
3D(Only 3D Models)(See p.48)Used for viewing 3D video.
RATIO (See p.41)Resizes an image.
MUTEMutes all sounds.
P Scrolls through the saved programmes.
PAGE Moves to the previous or next screen.
CHAR/NUMSwitches between Letter and Number input modes.
DELETEDeletes letters and numbers.
  

27
ENGENGLISH
REMOTE CONTROL
Coloured buttons These buttons are used for teletext (on TELETEXT models only), Programme edit.3D SETTING(Only 3D Models)Use this to view 3D video.
GUIDE
Shows programme guide.
HomeAccesses the main menus.
Q. MENU (See p.45)Accesses the quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OKSelects menus or options and confirms your input.
BACKReturns to the previous level.
INFO (See p.39)Views the information of the current programme and...

28
ENGENGLISH
REMOTE CONTROL
SUBTITLERecalls your preferred subtitle in digital mode.
Control buttons( , , , , )Controls the MY MEDIA menus, or the SIMPLINK compatible devices (USB,SIMPLINK).FREEZEFreezes the current frame while using the TV, AV, Component, RGB-PC, or HDMI input source.
SIMPLINK (See p.88) Accesses the AV devices connected to the TV;  Opens the SIMPLINK menu.
ADSwitches the Audio Description On or Off.
RATIO (See p.41)Resizes an image.
  

29
ENGENGLISH
WATCHING TV
WATCHING TV
 yFor optimum picture quality, adjust 
antenna direction.
 yIn poor signal areas, to achieve better 
picture quality it may be necessary to 
install a signal amplifier to the antenna.
 yIf the image quality is poor with an 
antenna connected, aim the antenna to 
the correct direction.
 yAn antenna cable and converter are not 
supplied.
NOTE
Turning the TV on for the first 
time
When you turn the TV on for the first time, the 
Initial setting screen appears. Select a...

30
ENGENGLISH
WATCHING TV
 yFor those countries without confirmed 
DTV broadcasting standards, some DTV 
features might not work, depending on 
the DTV broadcasting environment.
 yWhen France is selected for Country, 
password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, 
‘3’, ‘4’.
NOTE
4 When the basic settings are complete, 
press OK.
 yIf you do not complete the Initial setting, it 
will appear whenever the TV turns on.
 yDisconnect the power cord from the 
power outlet when you do not use the TV 
for a...