LG 23ea63vp User Manual

							21
ENGENGLISH
CUSTOMIZING SETTINGS
Each option is explained below.
MY KeY setting
1   Press FUnC. button on  the bottom of the Monitor 
set to display the FUnC. OSD. 
2  Select MY KeY setting by pressing the ► button. 
3 Enter to MY KeY setting by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► buttons.
5 Select exit to   leave the OSD menu.To return to 
the upper menu or set other menu items, use 
the up arrow  (
) button.
MY KeY setting Description
Picture Mode Picture Mode adjust the Monitor set for the best picture appearance.
sUPeR eneRGY sAVInG Enables SUPER ENERGY SAVING you can save energy with this energy-effcient 
function.
DUAL DIsPLAY User can use Clone or Extended in another monitor.
DUAL weB Help user to browse web efficiently by dividing in half and some other convenience in 
browsing dual pages.  
						

							22
ENGENGLISH
TROUBLESHOOTING
tRoUBLesHootInG
Check the following before calling for service.
no image appears
Is the power cord of the display 
connected?
 
y Check and see if the power cord is connected properly to the power 
outlet.
Is the power indicator light on? 
y Press the Power button.
Is the power on and the power 
indicator Red? 
y Adjust the brightness and the contrast.
Is the power indicator flickering? 
y If the display is in power saving mode, try moving the mouse or 
pressing any key on the keyboard to bring up the screen.
 
y Try to turn on the PC.
Do you see an "OUT OF RANGE" 
message on the screen? 
y This message appears when the signal from the PC (video card) is 
out of horizontal or vertical frequency range of the display. See the 
'Specifications' section of this manual and configure your display 
again.
Do you see a "NO SIGNAL" 
message on the screen?  
y When the monitor is on "No-Signal" in 5 minutes, the monitor goes to 
DPM mode.
Do you see a "osD LoCKeD" message on the screen?
Do you see “OSD LOCKED” when 
you push MENU button?
 
y You can secure the current control settings, so that they cannot be 
inadvertently changed. You can unlock the OSD controls at any time 
by pushing the MENU button for several seconds: the message “OSD 
UNLOCKED” will appear.
Display image is incorrect
Display Position is incorrect.
 
y Press the AUto button to automatically adjust your display image to 
the ideal setting.
On the screen background, vertical
bars or stripes are visible. 
y Press the AUto button to automatically adjust your display image to 
the ideal setting. 
Any horizontal noise appearing in 
any image or characters are not 
clearly portrayed. 
y Press the AUto button to automatically adjust your display image to 
the ideal setting. 
 
y Check Control Panel ► Display ► Settings
 and adjust the display 
to the recommended resolution or adjust the display image to the ideal 
setting. Set the color setting higher than 24 bits  (true color).  
						

							23
ENGENGLISH
TROUBLESHOOTING
Display image is incorrect
The screen color is mono or 
abnormal.
 
y Check if the signal cable is properly connected and use a screwdriver 
to fasten if necessary.
 
y Make sure the video card is properly inserted in the slot.
 
y Set the color setting higher than 24 bits (true color) at 
Control Panel 
► settings.
The screen blinks. 
y Check if the screen is set to interlace mode and if yes, change it to the 
recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VesA DDC) monitor found" message?
Have you installed the display 
driver?
 
y Be sure to install the display driver from the display driver CD (or 
diskette) that comes with your display. Or, you can also download the 
driver from our web site: http://www.lg.com.
 
y Make sure to check if the video card supports Plug&Play function.
  
y Check Control Panel ► Display ► Settings
 and see if the frequency or the resolution were 
changed.  If yes, readjust the video card to the recommend resolution.
 
y If the recommended resolution (optimal resolution) is not selected, le\
tters may be blurred and the 
screen may be dimmed, truncated or biased. Make sure to select the recom\
mend resolution.
 
y The setting method can differ by computer and O/S (Operation System), and resolution mentioned 
above may not be supported by the video card performance. In this case, \
please ask to the computer 
or the video card manufacturer.
CAUtIon
the screen is flickering.
Did you select the recommended 
resolution?
 
y If the selected resolution is HDMI 
1080i 60/50 Hz, the screen may 
be flickering. Change the resolution to the recommended resolution 
1080P .  
						

							24
ENGENGLISH
SPECIFICATIONS
sPeCIFICAtIons  
Display screen type 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-
Glare coating
Visible diagonal size: 54.6 cm
Pixel Pitch 0.247 mm x 0.247 mm (Pixel Pitch)
sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)
56Hz to 61Hz (HDMI)
Input Form Separate Sync. Digital
Video Input signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)
HDMI Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution Max D-SUB(Analog) : 1920 x 1080 @ 60 Hz
DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 Hz
Plug & Play DDC 2B(Analog,Digital,HDMI)
Power 
Consumption On Mode : 23 W(Typ.) 
Sleep Mode ≤ 0.3 W 
Off Mode ≤ 0.3 W 
Power Input 19 V 
 
1.3 A
AC-DC Adapter
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd
or Type PSAB-L202B, manufactured by LG Innotek Co.,Ltd
or Type PSAB-L202C, manufactured by LG Innotek Co.,Ltd
or Type PSAB-L202D, manufactured by LG Innotek Co.,Ltd
oUtPUt : 19 V  1.3 A
Dimensions
(w idth x Height x 
Depth) w
ith stand 50.0 cm x 38.0 cm x 17.8 cm
w ithout stand 50.0 cm x 30.7 cm x 7.4 cm
w eight 2.7 kg
t ilt Range -5° to 20°
environmental
conditions o
perating  temperature
operating Humidity 10°C to 35 °C
10 % to 80 % 
storage t emperature
storage Humidity -20°C to 60 °C
   5 % to 90 % non-Condensing
stand Base Attached (    ), Detached (O)
Power cord Wall-outlet type
Product specifications shown above may be changed without prior notice d\
ue to upgrade of product 
functions.
22eA63V  
						

							25
ENGENGLISH
SPECIFICATIONS
sPeCIFICAtIons  
Display screen type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-
Glare coating
Visible diagonal size: 58.4 cm
Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch)
sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)
56Hz to 61Hz (HDMI)
Input Form Separate Sync. Digital
Video Input signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)
HDMI Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution Max D-SUB(Analog) : 1920 x 1080 @ 60 Hz
DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 Hz
Plug & Play DDC 2B(Analog,Digital,HDMI)
Power 
Consumption On Mode : 29 W(Typ.)
Sleep Mode ≤ 0.3 W 
Off Mode ≤ 0.3 W 
Power Input 19 V 
 
1.6 A
AC-DC Adapter
Type  ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type  ADS-40FSG-19 19032GPG-1 , manufactured by SHENZHEN HONOR ELECTRONIC
or Type  ADS-40FSG-19 19032GPBR-1 , manufactured by SHENZHEN HONOR ELECTRONIC
or Type  ADS-40FSG-19 19032GPI-1 , manufactured by SHENZHEN HONOR ELECTRONIC
or Type  ADS-40FSG-19 19032GPCU-1 , manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A , manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E , manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B , manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
oUtPUt : 19 V 
 1.7 A
Dimensions
(w idth x Height x 
Depth) w
ith stand 53.3 cm x 39.8 cm x 18.0 cm
w ithout stand 53.3 cm x 32.6 cm x 7.5 cm
w eight 3.0 kg
t ilt Range -5° to 20°
environmental
conditions o
perating  temperature
operating Humidity 10°C to 35 °C
10 % to 80 % 
storage t emperature
storage Humidity -20°C to 60 °C
   5 % to 90 % non-Condensing
stand Base Attached (    ), Detached (O)
Power cord Wall-outlet type
Product specifications shown above may be changed without prior notice d\
ue to upgrade of product 
functions.
23eA63V  
						

							26
ENGENGLISH
SPECIFICATIONS
sPeCIFICAtIons  
Display screen type 68.6 cm (27 inch) Flat Panel Active matrix-TFT LCDAnti-
Glare coating
Visible diagonal size: 68.6 cm
Pixel Pitch 0.3114 mm x 0.3114 mm (Pixel Pitch)
sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)
56Hz to 61Hz (HDMI)
Input Form Separate Sync. Digital
Video Input signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)
HDMI Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution Max D-SUB(Analog) : 1920 x 1080 @ 60 Hz
DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 Hz
Plug & Play DDC 2B(Analog,Digital,HDMI)
Power 
Consumption On Mode : 34 W(Typ.)
Sleep Mode ≤ 0.3 W 
Off Mode ≤ 0.3 W 
Power Input 19 V 
 
1.6 A
AC-DC Adapter
Type  ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type  ADS-40FSG-19 19032GPG-1 , manufactured by SHENZHEN HONOR ELECTRONIC
or Type  ADS-40FSG-19 19032GPBR-1 , manufactured by SHENZHEN HONOR ELECTRONIC
or Type  ADS-40FSG-19 19032GPI-1 , manufactured by SHENZHEN HONOR ELECTRONIC
or Type  ADS-40FSG-19 19032GPCU-1 , manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A , manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E , manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B , manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
oUtPUt : 19 V 
 1.7 A
Dimensions
(w idth x Height x 
Depth) w
ith stand 62.3 cm x 44.9 cm x 19.3 cm
w ithout stand 62.3 cm x 37.8 cm x 8.5 cm
w eight 4.6 kg
t ilt Range -5° to 20°
environmental
conditions o
perating  temperature
operating Humidity 10°C to 35 °C
10 % to 80 % 
storage t emperature
storage Humidity -20°C to 60 °C
   5 % to 90 % non-Condensing
stand Base Attached (    ), Detached (O)
Power cord Wall-outlet type
Product specifications shown above may be changed without prior notice d\
ue to upgrade of product 
functions.
27eA63V  
						

							27
ENGENGLISH
SPECIFICATIONS
Preset Modes (Resolution)
Display Modes (Resolution)Horizontal 
Frequency(kHz)Vertical 
Frequency(Hz)
Polarity(H/V)
720 x 400 31.46870-/+
640 x 480 31.46960-/-
640 x 480 37.50075-/-
800 x 600 37.87960+/+
800 x 600 46.87575+/+
1024 x 768 48.36360-/-
1024 x 768 60.02375+/+
1152 x 864 67.50075+/+
1280 x 1024 63.98160+/+
1280 x 1024 79.97675+/+
1680 x 1050 65.29060-/+
1920 x 1080 67.50060+/+Recommend Mode
HDMI tIMInG
Display Modes (Resolution) Horizontal Frequency(kHz)Vertical Frequency(Hz)
480P 31.5060
576P 31.2550
720P 37.5050
720P 45.0060
1080i 28.1250
1080i 33.7560
1080P 56.2550
1080P 67.5060   Recommend Mode
Indicator
Mode LeD Color
On Mode Red
Sleep Mode Blinking Red
Off Mode Off  
						

							28
ENGENGLISH
PROPER POSTURE
Proper posture for using the Monitor set.
PRoPeR PostURe
Adjust the 
Monitor set and  your posture to 
allow you to view  images at the 
optimal viewing  angle.
Place your hands  gently on the 
keyboard, keeping  your arms bent at  the elbows and 
horizontally outright. Adjust the location of the 
Monitor set to avoid it 
reflecting light.  
						

							Make sure to read the Safety Precautions before  
using the product.
Keep the Owner’s Manual (CD) in an accessible 
place for future reference.
The model and serial number of the SET is 
located on the back and one side of the SET. 
Record it below should you ever need service.As an ENERGY STAR Partner LGE 
U. S. A.,Inc. has determined that this 
product meets the ENERGY STAR 
guidelines for energy efficiency.
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
MODEL
SERIAL
*above information is only for USA FCC Regulatory Declaration of Conformity
Trade Name: LG
Model : 22EA63VB,23EA63VB,27EA63VB
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs    
                NJ 07632 U.S.A
TEL: 201-266-2534