LG 26ld350 Owners Manual

							MUSIC LIST
USB
71
You can use the Music List menu to play MP3 files from a USB storage device. 
This TV cannot play back copy-protected files. 
The On Screen Display on your model may be slightly different.
Screen Components
Supported music file: 
*.MP3
Bit rate range 32 Kbps - 320 Kbps
• Sampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz
MPEG2 layer 3: 16 kHz, 22.05  kHz, 24 kHz
MPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz
Moves to upper level folder
Preview: If any album jacket
for the file exists, this jack-
et is displayed.
Current page/Total pages
Total number of marked
musics
Corresponding buttons on
the remote control
1
3
4
5
2
Select U US
SB
B
.Select M Mu
us
si
ic
c 
 L
Li
is
st
t
.
1
2
MENUENTERENTER
Music List
Up FolderTitle Duration
34
2
1
Page 2/3No Marked
Drive1
Navigation Popup Menu Page ChangeMark ExitCHMARK
5
A A 
 00:00 / 04:16Up Folder   
						

							USB
72
USB
Music Selection and Popup Menu
Use the C CH
H 
 
button to navigation in
the music page.
Use M MA
AR
RK
K
button to mark or unmark a music
file. If no music is marked, all the music in the
folder will be played in sequence. When one or
more music files are marked, the marked music
files will be played in sequence. If you want to
listen to only one song repeatedly, just mark
that one file and play.
Select the target folder or drive.
Select the desired musics.
Show the Popup menu.
Select the desired Popup menu.
2
3 1
4ENTER
ENTER
ENTER
5
BACKReturn to TV viewing.
Navigation Page Change MarkExit
CHMARKPopup Menu
Navigation Page Change MarkExit
CHMARKPopup Menu
Page 2/3No MarkedMusic List
Up Folder
A A 
 00:00 / 04:16Up Folder Drive1
Title
Duration
Page 2/3No MarkedMusic List
Up Folder
A A 
 00:00 / 04:16Up Folder Drive1
Title
Duration
3945 KB
128 Kbps
Play 
Play with Photo
Mark All
Delete
Close
G GP
Pl
la
ay
y 
 
(During stop): Play the selected music.
Once a song finishes playing, the next selected
one will be played. When there are no selected
musics to play, the next one in the current fold-
er will be played. If you go to a different folder
and  press  the E EN
NT
TE
ER
R
button,  the  current
music in playback will stop.
G GP
Pl
la
ay
y 
 M
Ma
ar
rk
ke
ed
d
: Play the selected musics. Once
a music finishes playing, the next selected one
will be played automatically.
G GS
St
to
op
p 
 P
Pl
la
ay
y 
 
(During  playback):  Stop  the  play-
ing musics.
G GP
Pl
la
ay
y 
 w
wi
it
th
h 
 P
Ph
ho
ot
to
o
:  Start  playing  the  selected
musics and then move to the Photo List. 
G GM
Ma
ar
rk
k 
 A
Al
ll
l
: Mark all musics in the folder.
G GU
Un
nm
ma
ar
rk
k 
 A
Al
ll
l
: Deselect all marked music.
G GD
De
el
le
et
te
e
: Delete the selected music.
G GC
Cl
lo
os
se
e
: Close the pop-up menu.     
						

							USB
73
The play information box (as shown below) will automatically
move across the screen when there is no user input to pre-
vent a fixed image remaining on the screen for a extended
period of time.
NOTE!
G GWhen music is playing,  is displayed in front of the music play time.
G
GA damaged or corrupted music file that does not play displays 00:00 as the play time.
G
GMusic files with copy-protection will not play.
G
GPress E EN
NT
TE
ER
R
, A A, or R RE
ET
TU
UR
RN
N 
 
button to stop the screen saver.    
						

							PICTURE CONTROL
74
PICTURE SIZE (ASPECT RATIO) CONTROL
PICTURE CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. 
HDMI/RGB-PC  input  source  use  4:3  or  16:9  aspect  ratio.  But  you  can  select  all  aspect  ratios  in  HDMI-PC
1920X1080 input.
You  can  select  a  different  aspect  ratio  depending  on  input  source  (analog  broadcasting,  digital  broadcasting,
aux).
You can also adjust A As
sp
pe
ec
ct
t 
 R
Ra
at
ti
io
o
in
the 
Q Q.
.M
ME
EN
NU
U.
Press the R RA
AT
TI
IO
O
button repeatedly to
select the desired picture format. 
EnterMovePICTURE
E
EnterMovePICTURE
E
Aspect Ratio   : 16:9
Picture Wizard
Energy Saving: Off
Picture Mode : Standard
• Backlight 70 
• Contrast 90
• Brightness 50
• Sharpness 70Aspect Ratio   : 16:9
Picture WizardEnergy Saving: Off
Picture Mode : Standard
• Backlight 70 
• Contrast 90
• Brightness 50
• Sharpness 70
16:9
Just Scan
Set By Program
4:3
Zoom
Cinema Zoom 1
Select P PI
IC
CT
TU
UR
RE
E
.
Select A As
sp
pe
ec
ct
t 
 R
Ra
at
ti
io
o
. 
Select the desired picture format.
1
MENU
3 2
ENTER
ENTER
4
BACKReturn to the previous menu.
MENUReturn to TV viewing.   
						

							PICTURE CONTROL
75
16:9
Adjust  the  picture  horizontally,  in  a  linear  pro-
portion to fill the entire screen.
Just Scan
Normally the edges of video signals are cropped
1-2%.  Just  Scan  turns  off  this  cropping  and
shows the complete video. 
Notes: If there is noise on the edges of the original
signal, it will be visible when Just Scan is activated.
J Ju
us
st
t 
 S
Sc
ca
an
n
operates only in
DTV/CADTV/Component/HDMI-DTV/DVI-DTV
(720p/1080i/1080p)input source.
Set By Program
Selects  the  proper  picture  proportion  to  match
the source’s image. 
4:3
Choose  4:3  when  you  want  to  view  a  picture
with an original 4:3 aspect ratio.
Zoom
Choose Zoom when you want to view the picture
without  any  alteration.  However,  the  top  and
bottom portions of the picture will be cropped.
When adjusting in Q.MENU menu,
a.  or  button: Adjust proportion of Zoom.
b.  or  button: Move the image on the screen.
Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion. 
This enlarges an image with cinemascope aspect
ratio (2.35:1) without distortion.
Note: When enlarging or reducing the picture,
the image may become distorted.
or  button:  Adjust proportion of
Cinema Zoom. The adjustment range is 1-16.
or  button: Move the image on the screen.
Just Scan
(4:3 4:3)
(16:9 16:9)
Set By Program
Set By Program         
						

							PICTURE CONTROL
76
PICTURE WIZARD
PICTURE CONTROL
Select P PI
IC
CT
TU
UR
RE
E
.
Select P Pi
ic
ct
tu
ur
re
e
W Wi
iz
za
ar
rd
d
.
1
MENU
2ENTERENTER
Adjust P Pi
ic
ct
tu
ur
re
e 
 W
Wi
iz
za
ar
rd
d
.Adjust W Wh
hi
it
te
e 
 L
Le
ev
ve
el
l
.
3ENTER
Adjust B Bl
la
ac
ck
k 
 L
Le
ev
ve
el
l
.
4ENTER
5ENTER
Adjust H Ho
or
ri
iz
zo
on
nt
ta
al
l
S Sh
ha
ar
rp
pn
ne
es
ss
s
.8ENTER
Adjust C Co
ol
lo
or
r
.
6ENTER
Adjust T Ti
in
nt
t
.
7ENTER
Picture Wizard
With Picture Wizard, you can adjust the picture quality of the
original image.
G
Black Level
Set the screen above identical to the Recommended sample 
below.
Next Previous
Next Previous
• Brightness 50E EE
E
Low HighRecommended
Color
Set the screen above identical to the Recommended sample 
below.
Next Previous
• Color 50E EE
E
Low HighRecommended
White Level
Set the screen above identical to the Recommended sample 
below.
Next Previous
Low HighRecommended
• Contrast 90E
EE
E
Tint
Set the screen above identical to the Recommended sample 
below.
Next Previous
Low HighRecommended
• Tint 0E
EE
ERG
Horizontal Sharpness
Set the screen above identical to the Recommended sample 
below.
Next Previous
• H Sharpness 50E EE
E
Low HighRecommended
EnterMovePICTURE
E
Aspect Ratio   : 16:9
Picture Wizard
Energy Saving: Off
Picture Mode : Standard
• Backlight 70 
• Contrast 90
• Brightness 50
• Sharpness 70
This feature lets you adjust the picture quality of the
original image.
Use  this  to  calibrate  the  screen  quality  by  adjusting
the Black and White Level etc. You can calibrate the
screen quality by easily following each step.
When  you  adjust  the  image  to 
L Lo
ow
w
,
R Re
ec
co
om
mm
me
en
nd
de
ed
d
or H Hi
ig
gh
h
, you can see the example
of the changes you made.  
						

							PICTURE CONTROL
77
Select input source to apply the
settings.
14
FAVMARK
Adjust V Ve
er
rt
ti
ic
ca
al
l
S Sh
ha
ar
rp
pn
ne
es
ss
s
.9ENTER
Adjust B Ba
ac
ck
kl
li
ig
gh
ht
t
.
13
ENTER
Finish the Picture Wizard.16ENTER
Save.15ENTER
Complete
Confirm Move Previous
Vertical Sharpness
Set the screen above identical to the Recommended sample 
below.
Next Previous
• V Sharpness 50E EE
E
Low HighRecommended
Backlight
Set the Backlight to your Brightness preference.
Next Previous
• Backlight 50E EE
E
Dark BrightRecommended
DTV
TV
AV1
AV2
Component
RGB-PC
HDMI1
HDMI2
Select (an) input(s) to apply the settings.
Warning: The picture quality may vary according to the
different types of signal and inputs.
EEMarkMARK
If  you  stop  the  setting  before  the  final
step,  the  changes  will  not  be  saved  to
the TV. 
Once the P Pi
ic
ct
tu
ur
re
e 
 W
Wi
iz
za
ar
rd
d
sets the pic-
ture quality, E En
ne
er
rg
gy
y 
 S
Sa
av
vi
in
ng
g
is changed
to O Of
ff
f 
 
automatically.
Close
The current adjustment value is saved to 
Expert1.i
Adjust C Co
ol
lo
or
r
T Te
em
mp
pe
er
ra
at
tu
ur
re
e
.
10
ENTER
Color Temperature
Set the Color Temperature as you like. Refer to the samples
below.
Next Previous
• Color Temperature          WarmE EE
E
Warm CoolMedium
Adjust D Dy
yn
na
am
mi
ic
c
C Co
on
nt
tr
ra
as
st
t
.
11
ENTER
Dynamic Contrast
Set the Dynamic Contrast as you like. Refer to the samples
below.
Next Previous
• Dynamic Contrast             OffE EE
E
Off HighMedium
Adjust C Co
ol
lo
or
r 
 G
Ga
ai
in
n
.
12
ENTER
Color Gain
Set the Color Gain as you like. Refer to the samples below.
Next Previous
• Color Gain                    Original  E EE
E
Original HighMedium  
						

							PICTURE CONTROL
78
PRESET PICTURE SETTINGS (PICTURE MODE)
PICTURE CONTROL
There  are  factory  presets  for  picture  settings  available  in  the  user  menus.  You  can  use  a  preset,  change  each
setting manually.
EnterMovePICTURE
E
EnterMovePICTURE
E
Aspect Ratio   : 16:9
Picture Wizard
Energy Saving: Off
Picture Mode : Standard
• Backlight 70 
• Contrast 90
• Brightness 50
• Sharpness 70Aspect Ratio   : 16:9
Picture WizardEnergy Saving: Off
Picture Mode : Standard
• Backlight 70 
• Contrast 90
• Brightness 50
• Sharpness 70
Select P PI
IC
CT
TU
UR
RE
E
.
Select P Pi
ic
ct
tu
ur
re
e 
 M
Mo
od
de
e
.
Select V Vi
iv
vi
id
d
,S St
ta
an
nd
da
ar
rd
d
, N Na
at
tu
ur
ra
al
l
,
C Ci
in
ne
em
ma
a
, S Sp
po
or
rt
t
, or G Ga
am
me
e
.
1
MENU
3 2
ENTER
ENTER
4
BACKReturn to the previous menu.
MENUReturn to TV viewing.
Vivid
Standard
Natural
Cinema
Sport
Game
Expert1
Expert2
V Vi
iv
vi
id
d
, S St
ta
an
nd
da
ar
rd
d
, N Na
at
tu
ur
ra
al
l
, C Ci
in
ne
em
ma
a
,
S Sp
po
or
rt
t
, and G Ga
am
me
e
Settings are preset for
the optimum picture quality at the facto-
ry. 
V Vi
iv
vi
id
d
: This is the mode to maximize the
effect  of  the  video  in  the  retail  store.
Strengthen  the  contrast,  brightness,
color and sharpness for vivid picture.
S St
ta
an
nd
da
ar
rd
d
:  This  is  the  mode  to  realize
optimum  viewing  condition  for  the  gen-
eral user.
N Na
at
tu
ur
ra
al
l
: This is the mode to display the
most natural screen status.
C Ci
in
ne
em
ma
a
: This mode optimizes video for
watching movies.
S Sp
po
or
rt
t
:  This  is  the  video  mode  to
emphasize  dynamic  video  and  primary
color (e.g, white, uniform, grass, sky blue
etc.)  by  realizing  the  optimal  screen  for
sports.
G Ga
am
me
e
:  This  is  the  mode  to  realize  fast
response speed in a fast gaming screen.
E Ex
xp
pe
er
rt
t
:  This  is  the  mode  to  adjust  the
video  in  detail  for  video  quality  expert
and general user.
You  can  also  adjust P Pi
ic
ct
tu
ur
re
e 
 M
Mo
od
de
e
in
the Q Q.
.M
ME
EN
NU
U
.  
						

							PICTURE CONTROL
79
MANUAL PICTURE ADJUSTMENT - USER MODE
Adjust the picture appearance to suit your preference and viewing situations.
Select P PI
IC
CT
TU
UR
RE
E
.
Make appropriate adjustments. Select B Ba
ac
ck
kl
li
ig
gh
ht
t
, C Co
on
nt
tr
ra
as
st
t
, B Br
ri
ig
gh
ht
tn
ne
es
ss
s
,
S Sh
ha
ar
rp
pn
ne
es
ss
s
, C Co
ol
lo
or
r
, or T Ti
in
nt
t
.
1
MENU
Select P Pi
ic
ct
tu
ur
re
e 
 M
Mo
od
de
e
.
2ENTER
Select V Vi
iv
vi
id
d
,S St
ta
an
nd
da
ar
rd
d
, N Na
at
tu
ur
ra
al
l
,
C Ci
in
ne
em
ma
a
, S Sp
po
or
rt
t
, or G Ga
am
me
e
.3ENTER
4
ENTER
5
ENTER
6
BACKReturn to the previous menu.
MENUReturn to TV viewing.
EnterMovePICTURE
E
Aspect Ratio : 16:9
Picture Wizard
Energy Saving: Off
Picture Mode : Standard
• Backlight 70 
• Contrast 90
• Brightness 50
• Sharpness 70• Backlight 70
E E
E
E
E
EE
E
Enter
When  adjusting  Energy  Saving,
B Ba
ac
ck
kl
li
ig
gh
ht
t
function is disabled.
B Ba
ac
ck
kl
li
ig
gh
ht
t
:  This  function  adjusts  the
brightness  of  LCD  panel,  to  control  the
brightness  of  the  screen.  Adjusting  the
backlight  is  recommended  when  setting
the brightness of the set. When decreas-
ing  the  backlight,  the  brightness  of  the
black becomes darker without any loss in
video signal and the power consumption
is reduced.
C Co
on
nt
tr
ra
as
st
t
: Increase or decrease the gra-
dient  of  the  video  signal.  You  may  use
Contrast when the bright part of picture
is saturated.
B Br
ri
ig
gh
ht
tn
ne
es
ss
s
:  Adjusts  the  base  level  of
the  signal  in  the  picture.  You  may  use
Brightness when the dark part of the pic-
ture is saturated.
S Sh
ha
ar
rp
pn
ne
es
ss
s
:  Adjusts  the  level  of  crisp-
ness  in  the  edges  between  the  light  and
dark  areas  of  the  picture.  The  lower  the
level, the softer the image.
C Co
ol
lo
or
r
: Adjusts intensity of all colors.
T Ti
in
nt
t
:  Adjusts  the  balance  between  red
and green levels.  
						

							PICTURE CONTROL
80
PICTURE IMPROVEMENT TECHNOLOGY
PICTURE CONTROL
Select P PI
IC
CT
TU
UR
RE
E
.
Select A Ad
dv
va
an
nc
ce
ed
d 
 C
Co
on
nt
tr
ro
ol
l
.
Select your desired options.
1
MENU
3 2
ENTER
ENTER
5
BACKReturn to the previous menu.
MENUReturn to TV viewing.Make appropriate adjustments.
4
EnterMovePICTUREE
RG
• Contrast 50
• Brightness 50
• Sharpness 50
• Color 50
• Tint 0
• Advanced Control
• Picture Reset
Screen (RGB-PC)
EnterMovePICTUREE
RG
• Contrast 50
• Brightness 50
• Sharpness 50
• Color 50
• Tint 0
• Advanced Control
• Picture Reset
Screen (RGB-PC)Color TemperatureF FMedium  G
G
Dynamic ContrastOff
Dynamic ColorOff
Noise ReductionOff
GammaMedium
Black LevelLow
Eye CareOff
Real CinemaOff
Close
E
You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
You can set the video seeing differently for each input. 
To  reset  to  the  factory  default  after  making  adjustments  to  each  input  source,  execute  the P Pi
ic
ct
tu
ur
re
e 
 R
Re
es
se
et
t
function for each P Pi
ic
ct
tu
ur
re
e 
 M
Mo
od
de
e
.