LG 26le3300 Owners Manual

							
13
EXTERNAL  EQUIPMENT  SETUP
SCREEN SETUP FOR PC MODE
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
Screen Reset
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE.
2Select Screen.
3Select Reset.
4
Select Yes.
5Run Reset.
To Set
Auto Config.
SCREENMovePrev.
Resolution
Position
Size
Phase
Reset
YesNo
OKMove PICTURE
 • Sharpness  70  • Colour   60 • Tint   0 • Colour Temp.   0 • Advanced Control • Picture Reset• TruMotion• Screen
RGWC
• Screen►
    
						

							
14
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the 
image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image 
will be unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
•  If the position of the image is still not correct, 
try Auto adjustment again.
•  If picture needs to be adjusted again after 
Auto adjustment in RGB (PC), you can adjust 
the Position, Size or Phase.
1 Select PICTURE.
2Select Screen.
3Select Auto Config..
4
Select Yes.
5Run Auto Config..
Auto Config.
Auto Config.
SCREENMovePrev.
Resolution
Position
Size
Phase
Reset
YesNo
OKMove PICTURE
 • Sharpness  70  • Colour   60 • Tint   0 • Colour Temp.   0 • Advanced Control • Picture Reset• TruMotion• Screen
RGWC
• Screen►
    
						

							
15
EXTERNAL  EQUIPMENT  SETUP
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC]
Selecting Resolution
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE.
2Select Screen.
3Select Resolution.
4Select the desired resolution.
5
Auto Config.
SCREENMovePrev.
Resolution
Position
Size
Phase
Reset
OKMove PICTURE
 • Sharpness  70  • Colour   60 • Tint   0 • Colour Temp.   0 • Advanced Control • Picture Reset• TruMotion• Screen
RGWC
• Screen
1024 x 768
1280 x 768
1360 x 768
►
    
						

							
16
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust 
the picture position manually.
This function works in the following mode : RGB[PC].
Adjustment for screen Position, Size, Phase
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select PICTURE.
2Select Screen.
3Select Position, Size or Phase.
4 Make appropriate adjustments.
5
OKMove PICTURE
 • Sharpness  70  • Colour   60 • Tint   0 • Colour Temp.   0 • Advanced Control • Picture Reset• TruMotion• Screen
RGWC
• Screen►
Auto Config.
SCREEN
Resolution
Position
Size
Phase
Reset
MovePrev.
    
						

							
17
WATCHING  TV  /  PROGRAMME  CONTROL
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
INITIALIZING SETUP 
When your TV is turned on, you will be able to use its features.
VOLUME ADJUSTMENT
PROGRAMME SELECTION
1If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can 
adjust the Language, Mode Setting, Power Indicator(When you select Home Use from 
Mode Setting - Only LED LCD TV MODELS), Country or TimeZone (When Russia is select-
ed for Country) or Set Password(When France is selected for Country), Auto Tuning.
Note: 
a.  If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b.  Press the BACK button to change the current OSD to the previous OSD.
c.  For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment.
d.  "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
e.  "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data, “Store Demo” mode initializes the product to the image quality set by us after a certain period of time.
f.  The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION menu.
g. When France is selected for Country, password is not '0', '0', '0', '0' but ‘1’, ‘2’, ‘3’, ‘4’.
1Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2In standby mode to turn TV on, press the  / I, INPUT or P         (or P ▲▼ ) button on the TV 
or press the POWER, INPUT, P        or NUMBER button on the remote control and the TV 
will switch on.
1Press the P         or NUMBER buttons to select a programme number.
1Press the  + or - button to adjust the volume.
2If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,  + , - or AV Mode button.
   
						

							
18
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
  Aspect Ratio: Selects your desired picture for-
mat.
   For Zoom Setting, select 14:9, Zoom and 
Cinema Zoom in Ratio Menu. After complet-
ing Zoom Setting, the display goes back to 
Q.Menu.
 Clear Voice II : By differentiating the human 
sound range from others, it helps users lis-
ten to human voices better.
 Picture Mode : Selects your desired Picture 
Mode.
 Sound Mode : It is a feature to automatical-
ly set the sound combination which it deems 
the best for the images being watched. 
Selects your desired Sound Mode.
  Audio or Audio Language : Selects the sound 
output.
 Sleep Timer : Sets the sleep timer.
 Skip Off/On : Selects the Skip Off/On.
 USB Device : Selects “Eject” in order to eject 
USB device.
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
• Press the Q.MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Display each menu.
2Select your desired Source.
3
◄  Aspect Ratio  ►
16:9
Exit
   
						

							
19
WATCHING  TV  /  PROGRAMME  CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
OKMove
● Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
• Press the RED button, you can check the 
Customer Support menu.
• Press the GREEN button, you can check 
the Simple Manual menu.
• Press the MENU/EXIT button to return to 
normal TV viewing.
• Press the BACK button to move to the pre-
vious menu screen.
NOTE
 ►It is not possible to use CI Information in Analogue mode.
 ►IR Blaster : For further information, refer to the optional “Wireless Media Box” manual for operat-ing instructions. 
 ►It is possible to use Movie List menu in 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 
32/37/42/47/55LE5***.
1Display each menu.
2Select a menu item.
3Move to the pop up menu.
OKMove
● Clock
● Off Time  : Off
● On Time  : Off
● Sleep Timer  : Off
TIMEOKMove
● Set Password● Lock System  : Off ● Block Programme ● Parental Guidance  : Blocking Off ● Input Block● Key Lock  : Off
LOCK
● Language(Language)● Country  : UK● Disability Assistance● Power Indicator● Factory Reset● Set ID  : 1● Mode Setting  : Home Use
● IR Blaster
OKMoveOPTION
OKMove 
● Aspect Ratio  : 16:9● Picture Wizard●       Energy Saving  : Off● Picture Mode  : Standard  • Backlight   70  • Contrast   100 • Brightness   50 • Sharpness  70
PICTUREOKMove
● Auto Volume  : Off
● Clear Voice II  : Off   3
● Balance    0
● Sound Mode  : Standard
  • Infinite Sound : Off
 • Treble   50
 • Bass   50
 • Reset
AUDIO
LR
Movie ListMusic ListPhoto List
MY MEDIA
ExitOptionPress OK(     ) to see photos from the USB.
SETUPPICTURE
LOCKOPTION
AUDIO
INPUT
TIME
MY MEDIA
(Except for 19/22/26/32LD3***, 
 32/37/42/47LD4***, 19/22/26LE3***, 22/26LE5***)
AntennaUSB
HDMI2HDMI3HDMI4HDMI1
AV1AV2Component
RGB
OKMoveInput List
Input LabelExit
AV3
    
						

							
20
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
AUTO PROGRAMME TUNING 
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 1,000. But the number may differ slightly 
depending on broadcasting signals.
DVB-T, DVB-C Auto Tuning is a menu for users in countries that support DVB cable. 
If you want to select the Antenna,
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• Use NUMBER buttons to input a 4-digit 
password in Lock System ‘On’.
• If you wish to keep on auto tuning select 
Start using the        button. Then, press 
the OK button. Otherwise select Close. 
• Automatic Numbering: Decide whether 
to use the programme numbers as sent 
by broadcasting stations for tuning.
• When select Italy in the County menu, If 
the pop up is displayed when the conflict-
ed programme after Auto Tuning, select a 
broadcaster for Conflicting programme 
number to solve.
OKMove
● Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Auto Tuning
OKMove
● ● Auto Tuning● Manual Tuning● Programme Edit● CI Information   
SETUP
● Auto TuningPlease select your TV Connection.
CableAntenna
Close
If you select antenna or cable,existing channel information isdeleted.
1Select SETUP.
2Select Auto Tuning.
3
Select Antenna.
4Select Start.
5Run Auto tuning.
AntennaCable
AntennaCableCheck your antenna connection. The previous channel information will be updated during Auto Tuning.
SECAM L SearchAutomatic Numbering
Start
Close
Antenna
Antenna
►
• In the following country, DVB cable can be used : Germany, Netherlands, Sweden, Switzerland, 
Denmark, Austria, Finland, Norway, Slovenia, Hungary.(The supported country can be added.)
   
						

							
21
WATCHING  TV  /  PROGRAMME  CONTROL
If you want to select the Cable,
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1Select SETUP.
2Select Auto Tuning.
3
Select Cable.
4Select Comhem or Other 
Operators.
5
Select Quick or Full.
OKMove
● Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Auto Tuning
OKMove
● ● Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Auto Tuning
OKMove
● ● Auto Tuning● Manual Tuning● Programme Edit● CI Information   ● Cable DTV Setting
SETUP
● Auto TuningPlease select your TV Connection.
CableAntenna
Close
If you select antenna or cable,existing channel information isdeleted.
AntennaCable
AntennaCable
►►►
• Use NUMBER buttons to input a 4-digit 
password in Lock System ‘On’.
• When you select the Cable, the Cable 
Service Operator selection screen can 
differ or not exist by the Cable situation of 
the applicable country.
• The popup window to select Service 
Operator is only shown initially for the 3 
cases when you accessing the Initial 
Setting menu, when you change from 
Antenna to Cable or when you access 
the menu after changing the Country.
• When you want to select Service Operator 
aside from the above 3 cases, you can do 
so by selecting Setup->Cable DTV 
Setting-> Service Operator.
• Acquired certification SO : Sweden(Comhem, Canal Digital), Denmark(YouSee, Canal Digital, 
Stofa), Norway(Canal Digital).
• If there are not any Service Operator that you want, select Other Operators.
• If you select “Other Operators”, or the selected country supports “Other Operators” only, it may 
take some time to search all the channels, or it may not search some of the channels.
   If some of the channels do not appear, follow the steps below:
   1. SETUP -> Auto Tuning -> Cable -> Setting
   2. Switch Home Tuning  from "Off" to "On"
   3. Input additional values such as the frequency, symbol rate, modulation, and network ID. 
      (You can ask your cable service provider for the above information.)
PreviousNext
Comhem
Other Operators
Service Operator
   
						

							
22
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
 ■When you select the Quick,
Start Frequency(kHz)  : 114000
Quick
End Frequency(kHz)  : 862000
Network  : Auto
OK
Close
Setting
Start Frequency(kHz)  : 114000
Quick
End Frequency(kHz)  : 862000
Network  : Auto
OK
Close
Setting
•  If you wish to keep on auto tuning, select 
Start using the        button. Then, press 
the OK button. Otherwise select Close. 
• Automatic Numbering: Decide whether 
to use the programme numbers as sent 
by broadcasting stations for tuning.
• Skip Scramble Programme : Scramble 
Programme is skipped in Auto Tuning 
and Manual Tuning.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
Home Tuning◄    On    ►● Frequency(kHz)
Network ID
Start Frequency(kHz)
End Frequency(kHz)
● Symbol rate(kS/s)
● Modulation
362000
Auto
114000
862000
6900
0
640QAM
Reset
Close
6Select Quick.
7Select Setting.
8Make appropriate 
adjustments.
9Select Close.
10Select OK.
11Select Start.
12Run Auto tuning.
Check your antenna connection. The previous channel information will be updated during Auto Tuning.
Skip Scramble ProgrammeAutomatic Numbering
Start
Close
Cable
Cable