LG 26le5300 Owners Manual

							www.lg.com
OWNER’S MANUAL
LED LCD TV / LCD TV 
Please read this manual carefully before operating 
your set and retain it for future reference.
P/NO :  MFL62882730 (1 009-REV 02)
 
LED LCD TV MODELS 
19LE5300
22LE5300
26LE5300
22LE5500
26LE5500 32LE5300
37LE5300
42LE5300
47LE5300
55LE530042LE7300
47LE7300
55LE7300
42LE530C
47LE530C
55LE530C LCD TV MODELS
32LD420
42LD420
47LD420
32LD450
37LD450
42LD450
47LD450
37LD450C
42LD450C
47LD450C 32LD520
42LD520
47LD520
55LD520
55LD520C
42LD630
47LD630
55LD630
  
						

							2
The  lightning  flash  with  arrowhead  
symbol,  within  an  equilateral  trian- 
gle,  is  intended  to  alert  the  user  to  
the  presence  of  uninsulated  “dan-
gerous  voltage”  within  the  product’s  enclo-
sure  that  may  be  of  sufficient  magnitude  to 
constitute a risk of electric shock to persons.
The exclamation point within an equi-
lateral  triangle  is  intended  to  alert  
the  user  to  the  presence  of  impor- 
tant  operating  and  maintenance 
(servicing)  instructions  in  the  literature 
accompanying the appliance.
 TO REDUCE THE RISK OF ELECTRIC  
SHOCK DO NOT REMOVE COVER (OR  
BACK). NO USER SERVICEABLE PARTS  
INSIDE. REFER TO QUALIFIED SERVICE  
PERSONNEL.
WARNING/CAUTION  
TO REDUCE THE RISK OF FIRE AND  
ELECTRIC SHOCK, DO NOT EXPOSE THIS 
PRODUCT TO RAIN OR MOISTURE.
  NOTE TO CABLE/TV INSTALLER
This  reminder  is  provided  to  call  the  CATV  system  
installer’s attention to Article 820-40 of the Nati
onal 
Electric  Code  (U.S.A.).  The  code  provides  guide-
lines for proper grounding and, in particular, speci- 
fies that the cable ground shall be connected to th e 
grounding  system  of  the  building,  as  close  to  the 
point of the cable entry as practical.
WARNING / CAUTION
To prevent fire or shock hazards, do not expose  
this product to rain or moisture.
  FCC Notice
Class B digital device 
This  equipment  has  been  tested  and  found  to  
comply with the limits for a Class B digital device , 
pursuant  to  Part  15  of  the  FCC  Rules.  These 
limits  are  designed  to  provide  reasonable  pro- 
tection against harmful interference in a residen- 
tial  installation.  This  equipment  generates,  uses  
and can radiate radio frequency energy and, if not  
installed  and  used  in  accordance  with  the 
instructions,  may  cause  harmful  interference  to 
radio  communications.  However,  there  is  no 
guarantee  that  interference  will  not  occur  in  a  
particular  installation.  If  this  equipment  does  
cause harmful interference to radio or television  
reception,  which  can  be  determined  by  turning  
the  equipment  off  and  on,  the  user  is  encour-
aged to try to correct the interference by one or 
more of the following measures: 
- Reorient or relocate the receiving antenna.
-  Increase  the  separation  between  the  equip-
ment and receiver.
-  Connect the equipment to an outlet on a circuit  different  from  that  to  which  the  receiver  is  con- 
nected.
-  Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.Operation is subject to the following two condi-
tions:  (1)  This  device  may  not  cause  (harmful) 
interference,  and  (2)  this  device  must  accept  
any interference received, including interference  
that  may  cause  undesired  operation  (of  the  
device). 
Any changes or modifications in construction of  
this device which are not expressly approved by 
the party responsible for compliance could void  
the user’s authority to operate the equipment.
  CAUTION
Do  not  attempt  to  modify  this  product  in  any  
way  without  written  authorization  from  LG  
Electronics.  Unauthorized  modification  could  
void the user’s authority to operate this product.
IMPORTANT INFORMATION TO PREVENT “IMAGE  
BURN / BURN-IN” ON YOUR TV SCREEN
ë When a fixed image (e.g. logos, screen menus, video  game, and computer display) is displayed on 
the TV for an extended period, it can become permanently imprinted on the screen. This phenom- 
enon is known as “image burn” or “burn-in.” Image b urn is not covered under the manufacturer’s 
warranty. 
ë In order to prevent image burn, avoid displaying a  fixed image on your TV screen for a prolonged 
period (2 or more hours for LCD, 1 or more  
hours for Plasma). 
ë Image  burn  can  also  occur  on  the  letter- 
boxed  areas  of  your  TV  if  you  use  the  4:3  
aspect ratio setting for an extended period.
WARNING  / CAUTION
    
						

							3
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions. 
Keep these instructions. 
Heed all warnings. 
Follow all instructions.
1Do not use this apparatus  
near water.
2Clean only with dry cloth.
3Do  not  block  any  ventilation  
openings. Install in accordance  
with  the  manufacturer ’s  
instructions.
4Do  not  install  near  any  heat  
sources  such  as  radiators,  heat  
registers, stoves, or other appa-
ratus (including amplifiers) that  
produce heat.
5Do  not  defeat  the  safety  pur- 
pose of the polarized or ground- 
ing-type  plug.  A  polarized  plug  
has  two  blades  with  one  wider 
than  the  other.  A  grounding  
type plug has two blades and a 
third grounding prong, The wide  
blade  or  the  third  prong  are 
provided  for  your  safety.  If  the  
provided  plug  does  not  fit  into 
your  outlet,  consult  an  electri- 
cian  for  replacement  of  the  
obsolete outlet.
6Protect  the  power  cord  from  
being  walked  on  or  pinched  
particularly  at  plugs,  conve- 
nience  receptacles,  and  the  
point  where  they  exit  from  the  
apparatus.
7Only  use  attachments/acces- 
sories  specified  by  the  manu- 
facturer.
8Use  only  with  the  cart,  stand,  
tripod,  bracket,  or  table  speci- 
fied  by  the  manufacturer,  or 
sold  with  the  apparatus.  When  
a  cart  is  used,  use  caution  
when  moving  the  cart/appara- 
tus combination to avoid injury  
from tip-over.
9Unplug  this  apparatus  during  
lighting storms or when unused  
for long periods of time.
10Refer  all  servicing  to  qualified  service  per- 
sonnel. Servicing is required when the appa- 
ratus  has  been  damaged  in  any  way,  such  
as  power-supply  cord  or  plug  is  damaged,  
liquid has been spilled or objects have fallen  
into  the  apparatus,  the  apparatus  has  been 
exposed to rain or moisture, does not oper-
ate normally, or has been dropped.
11Never touch this apparatus or antenna dur- 
ing a thunder or lighting storm.
12When mounting a TV on the wall, make sure  
not  to  install  the  TV  by  the  hanging  power  
and signal cables on the back of the TV.
13Do not allow an impact shock or any objects  
to  fall  into  the  product,  and  do  not  drop  
onto the screen with something.
14CAUTION concerning the Power Cord: 
It is recommend that appliances be placed  
upon  a  dedicated  circuit;  that  is,  a  single  
outlet  circuit  which  powers  only  that  appli- 
ance  and  has  no  additional  outlets  or  
branch  circuits.  Check  the  specification  
page of this owners manual to be certain. 
Do n ot connect too many appliances to the  
same AC power outlet as this could result in  
fire or electric shock. 
Do  not  overload  wall  outlets.  Overloaded  
wall  outlets,  loose  or  damaged  wall  outlets, 
extension  cords,  frayed  power  cords,  or  
damaged  or  cracked  wire  insulation  are  
dangerous  .  Any  of  these  conditions  could 
result  in  electric  shock  or  fire.  Periodically 
examine the cord of your appliance, and if its  
appearance  indicates  damage  or  deteriora- 
tion, unplug it, discontinue use of the appli-
ance,  and  have  the  cord  replaced  with  an  
exact  replacement  part  by  an  authorized  
servicer. Protect the power cord from phys- 
ical  or  mechanical  abuse,  such  as  being  
twisted, kinked, pinched, closed in a door, or  
walked  upon.  Pay  particular  attention  to  
plugs, wall  outlets,  and  the  point where  the  
cord exits the appliance.  
Do  not  make  the  TV  with  the  power  cord  
plugged in. Do not use a damaged or loose  
power  cord.  Be  sure  do  grasp  the  plug 
when  unplugging  the  power  cord.  Do  not 
pull on the power cord to unplug the TV.
RJw~ºJW6TDrJ+TPXrFW~uWºo;J+TFW~uWºs 
						

							4
SAFETY INSTRUCTIONS
15WARNING - To reduce the risk of  
fire  or  electrical  shock,  do  not  
expose  this  product  to  rain,  
moisture or other liquids. Do not  
touch the TV with wet hands. Do 
not  install  this  product  near  
flammable objects such as gas- 
oline or candles or expose the  
T V  to  direct  air  conditioning. 
16Do  not  expose  to  dripping  or  
splashing  and  do  not  place  
objects  filled  with  liquids,  such  
as  vases,  cups,  etc.  on  or  over  
the  apparatus  (e.g.  on  shelves 
above the unit).
17GROUNDING 
Ensure that you connect the earth ground wire  
to prevent possible electric shock (i.e. a TV with  
a three-prong grounded AC plug must be con- 
nected to a three-prong grounded AC outlet). If  
grounding  methods  are  not  possible,  have  a  
qualified  electrician  install  a  separate  circuit  
breaker.  
Do not try to ground the unit by connecting it to 
telephone wires, lightening rods, or gas pipes.
Power  
Supply
Short-circuit 
Breaker
18DISCONNECTING DEVICE FROM MAINS 
Mains  plug  is  the  disconnecting  device.  The  
plug must remain readily operable.
19As  long  as  this  unit  is  connected  to  the  AC  
wall outlet, it is not disconnected from the AC  
power source even if you turn off this unit by  
SWITCH.
20Cleaning 
When  cleaning,  unplug  the  power  cord  and  
scrub    gently  with  a  soft  cloth  to  prevent 
scratching. Do not spray water or other liquids  
directly  on  the  TV  as  electric  shock  may  
occur.  Do  not  clean  with  chemicals  such  as  
alcohol, thinners or benzene.
21Moving 
Make sure the product is turned off, unplugged  
and  all  cables  have  been  removed.  It  may  
take 2 or more people to carry larger TVs. Do  
not  press  against  or  put  stress  on  the  front  
panel of the TV.
22ANTENNAS 
Outdoor antenna grounding
If an outdoor antenna is installed, follow the  
precautions below. An outdoor antenna sys- 
tem  should  not  be  located  in  the vicinity  of  
overhead  power  lines  or  other  electric  light 
or  power  circuits,  or  where  it  can  come  in  
contact  with  such  power  lines  or  circuits  as  
death or serious injury can occur.
Be sure the antenna system is grounded so 
as  to  provide  some  protection  against  volt- 
age surges and built-up static charges. 
Section 810 of the National Electrical Code 
(NEC)  in  the  U.S.A.  provides  information  
with  respect  to  proper  grounding  of  the  
mast  and  supporting  structure,  grounding  
of  the  lead-in wire  to  an  antenna  discharge 
unit,  size  of  grounding  conductors,  location 
of  antenna  discharge  unit,  connection  to 
grounding  electrodes  and  requirements  for  
the grounding electrode.  
Antenna grounding according to the  
National Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Antenna Discharge Unit 
(NEC Section 810-20) 
Grounding Conductor 
(NEC Section 810-21) 
Ground Clamps
Power Service Grounding 
Electrode System (NEC 
Art 250, Part H)Ground Clamp
Electric Service Equipment
NEC: National Electrical Code
23Ventilation 
Install your TV where there is proper ventila- 
tion. Do not install in a confined space such  
as  a  bookcase.  Do  not  cover  the  product  
with  cloth  or  other  materials  (e.g.)  plastic  
while  plugged  in.  Do  not  install  in  exces- 
sively dusty places. 
24Take care not to touch the ventilation open- 
ings.  When  watching  the  TV  for  a  long  
period,  the  ventilation  openings  may  
become hot.
25If  you  smell  smoke  or  other  odors  coming  
from  the  TV,  unplug  the  power  cord  contact 
and authorized service center.
26Do not press strongly upon the  
panel with hand or sharp object  
such  as  nail,  pencil  or  pen,  or  
make a scratch on it.
27Keep the product away from direct sunlight.
RJw~ºJW6TDrJ+TPXrFW~uWºo;J+TFW~uWºs 
						

							5
28Dot Defect 
The  Plasma  or  LCD  panel  is  a  high  technol- 
ogy product with resolution of two million to 
six million pixels. In a very few cases, you
could  see  fine  dots  on  the  screen  while  
you’reviewing  the  TV.  Those  dots  are  deacti-
vated  pixels  and  do  not  affect  the  perfor-
mance and reliability of the TV.
29Generated Sound 
“Cracking” noise: A cracking noise that occurs  
when watching or turning off the TV is gener-
ated  by  plastic  thermal  contraction  due  to 
temperature and humidity. This noise is com-
mon for products where thermal deformation 
is required.
Electrical  circuit  humming/panel  buzzing:  A 
low level noise is generated from a high-speed  
switching circuit, which supplies a large amount  
of  current  to  operate  a  product.  It  varies 
depending on the product.
This  generated  sound  does  not  affect  the  
performance and reliability of the product.
30For LED LCD TV/LCD TV
If  the TV  feels  cold  to  the  touch,  there  may  be  
a  small  “flicker”  when  it  is  turned  on.  This  is 
normal, there is nothing wrong with TV.
Some  minute  dot  defects  may  be  visible  on 
the  screen,  appearing  as  tiny  red,  green,  or  
blue  spots.  However,  they  have  no  adverse  
effect on the monitor’s performance.
Avoid touching the LCD screen or holding your  
finger(s)  against  it  for  long  periods  of  time.  
Doing  so  may  produce  some  temporary  dis-
tortion effects on the screen.
ON DISPOSAL 
(Only Hg lamp used LCD TV)
The fluorescent lamp used in this product con- 
tains  a  small  amount  of  mercury.    Do  not 
dispose  of  this  product  with  general  house-
hold  waste.  Disposal  of  this  product  must  be  
carried  out  in  accordance to the regulations of  
your local authority.
RJw~ºJW6TDrJ+TPXrFW~uWºo;J+TFW~uWºs 
						

							6
CONTENTS
HOW TO USE THE OWNERS MANUAL ON THE CD-ROM
To view the Owners Manual on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. 
The “ACRORD folder on the CD-ROM contains the installation programs for them.
If  you  want  to  install  those  programs,  Open  the  “My   Computer”
ŸOpen  the  “LG”ŸOpen  the 
“ACRORD”
Ÿdouble-click your language.
TO VIEW THE OWNERS MANUAL ON THE CD-ROM
The Owners Manual files are included in the supplied CD-ROM. 
Load the supplied CD-ROM into the CD-ROM drive of y our PC.
After a while, the web page of the CD-ROM will open  automatically. (for Windows only)
If the web page does not appear automatically, open the Owners Manual file 
directly.
   Open the “My computer”
ŸOpen the “LG”ŸOpen the “index.htm” file.   !NOTE
When you click, display the PDF file.
You can find the  
desired contents 
easily using the 
bookmark.
WARNING / CAUTION. . . . . . . . . . . . . . . . . . . . . . .      2 
SAFETY INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . .  3
PREPARATION
Accessories  . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . .  7
Stand Instruction   . . . . . . . . . . . . . . . . . . . . . . . . .
 . . . . . . . . . . . . . . .  9
VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   16
Cable Management   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   18
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . .   20
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . .
 . . . . . . . . . . . . . . . . . .   20
Attaching the TV to a Desk . . . . . . . . . . . . . . . . . . . . . . .   21
Kensington Security System . . . . . . . . . . . . . . . . . . . . . . 22
WATCHING TV
Connecting your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . 24
Initial Setting   . . . . . . . . . . . . . . . . . . . . . . . . .
 . . . . . . . . . . . . . . . . . .   24
On-Screen Menus Selection   . . . . . . . . . . . . . . . . . . . . . 
25
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . 26
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . 29
Open Source Software Notice . . . . . . . . . . . . . . . . . .   30
Product Specifications   . . . . . . . . . . . . . . . . . . . . . . . . .
 . . . . .   31
TO VIEW THE SIMPLE MANUAL
You  can  easily  and  effectively  access  the  TV  inform ation  by 
viewing a simple manual on the TV.
Select  
Simple Manual .Select the part of the manual you 
want to see.
CONTENTS
Ÿ
Ÿ Ÿ
1MENU2GREEN
   
						

							7
Ensure that the following accessories are included 
with your TV. If an accessory is missing, please con-
tact the dealer where you purchased the TV.  
The accessories included may differ from the images  below.
PREPARATION
ACCESSORIES
Option Extras
*  Wipe  spots  on  the  exterior  only 
with the polishing cloth.
*  Do not wipe roughly when remov- ing  stain.  Excessive  pressure  may  
cause scratch or discoloration.
Polishing Cloth
Not included with all models
D-sub 15 pin Cable
When  using  the  VGA  (D-sub  15  
pin  cable)  PC  connection,  the 
user  must  use  shielded  signal 
interface cables with ferrite cores 
to  maintain  standards  compli-
ance.
1.5V 1.5V
Owner’s Manual CD ManualRemote Control,
Batteries (AAA)
19/22/26LE5300, 22/26LE5500
Cable Holder
(Refer to p.19)
Screws for stand assembly (Refer to P.9, 10)x 4 x 4
(M4 x 14) (M4 x 20)AC/DC AdapterRing spacers
(Refer to p.17)
(For 26LE5300, 26LE5500)
x 4
Power Cord
(For 26LE5300,26LE5500)
32/37/42/47LD450, 37/42/47LD450C, 42/47/55LD630
(M4 x 20)
Screws for stand  assembly
(Refer to P.12) Screws for stand fixing
(Refer to P.21)
x 8
Protection Cover(Refer to P.13)
(For 32/37/42LD450,    
37/42LD450C, 42LD630)
Power CordProtective Bracket 
and Screw for 
Power Cord
(Refer to P.18)
(For 37/42/47LD450C)
RJw~ºJW6TDrJ+TPXrFW~uWºo;J+TFW~uWºs 
						

							PREPARATION
8
32/37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530C
Screws for stand assembly
(Refer to P.10) x 4
x 4
x 4 x 4
(M4 x 22) (M4 x 26) (M4 x 16) (M4 x 24)
(32LE5300) (47/55LE5300, 
47/55LE530C)
(37/42LE5300, 
42LE530C)
(32/37/42/47/55LE5300, 42/47/55LE530C)
Screws for stand assembly
(Refer to P.11)x 4 x 4
x 3 x 3
(M4 x 12) (M4 x 16)
(M4 x 20) (M4 x 26)
(42/47LE7300) (55LE7300)
32/42/47LD420, 32/42/47/55LD520, 55LD520C
Protection Cover
(Refer to P.15)
Screws for stand assembly (Refer to P.14)
(M4 x 24) x 4
Power Cord
(Except 47LD420, 
47/55LD520, 55LD520C)
Screw for stand fixing
(Refer to P.21)
Protective Bracket and Screw 
for Power Cord (Refer to P.18)Torx plus Star head screw (Refer to P.14) x 2
(For 55LD520C)
(For 55LD520C)
x 4
(M4 x 14)
(For 55LD520C)
Screw for stand  fixing
(Refer to P.21)
(For 32LE5300)
Cable Holder
(Refer to p.19)
(For 42/47/55LE7300)
Cable Management 
Clip
(Refer to p.19)
Component gender 
cable, AV gender cable
x 2
Torx plus Star head screw
(Refer to P.10) x 2
(For 42/47/55LE530C)
RJw~ºJW6TDrJ+TPXrFW~uWºo;J+TFW~uWºs 
						

							9
STAND INSTRUCTIONS (For 19/22LE5300, 22LE5500)
ë Image shown may differ from your TV.
!NOTE
 When  assembling  the  desk  type  stand, 
make sure the screws are fully tightened (If not  tightened  fully,  the  TV  can  tilt  forward  
after the product installation). Do not  over 
tighten.
1Carefully  place  the TV  screen  side  down  on  
a  cushioned  surface  to  protect  the  screen 
from damage.
2Assemble  the  parts  of  the  STAND  BODY 
with the  STAND BASE  of the TV.
INSTALLATION
1Carefully  place  the TV  screen  side  down  on  
a  cushioned  surface  to  protect  the  screen 
from damage.
2Remove the screws that hold the stand on. 
3Detach the stand from TV.
DETACHMENT
3Assemble the TV as shown.
4Install the 4 screws into the holes shown.
STAND BASE
STAND BODY
M4 x 14
 
						

							PREPARATION
10
INSTALLATIONDETACHMENT
ë Image shown may differ from your TV.
!NOTE
 When  assembling  the  desk  type  stand, 
make sure the screws are fully tightened (If not  tightened  fully,  the  TV  can  tilt  forward  
after the product installation). Do not  over 
tighten.
1Carefully  place  the TV  screen  side  down  on  
a  cushioned  surface  to  protect  the  screen 
from damage.
2Assemble  the  parts  of  the  STAND  BODY 
with  the  STAND  BASE   of  the  TV.  At  this 
time,  tighten  the  screws  that  hold  the  
STAND BODY  on.
3Assemble the TV as shown.
4Assemble  the  part  of  the  STAND  REAR 
COVER  with the TV.
5Install the 4 screws into the holes shown.
1Carefully place the TV screen side down on  
a  cushioned  surface  to  protect  the  screen 
from damage.
2Remove the screws that hold the stand on. 
3Detach the  STAND REAR COVER  from TV.
4Detach the stand from TV.
STAND INSTRUCTIONS  
(For 26/32/37/42/47/55LE5300, 26LE5500, 42/47/55LE530C, 42/47/55LE530C)
STAND BASESTAND BODY
STAND REAR 
COVER
M4 x 16M4 x 14
26LE5300, 
26LE5500
Other models
M4 x 22  (32LE5300)
M4 x 24  (37/42LE5300, 42LE530C)
M4 x 26  (47/55LE5300, 47/55LE530C)M4 x 20
26LE5300, 
26LE5500
or
Tighten  the  two  of  these  four  
screws  and  the  two  Torx  plus  
star  head  screws  (provided  as 
parts  of  the TV)  to  secure  the TV. Tighten  
the  two  Torx  plus  star  head  screws  with  a 
star  head  driver  bit  (not  provided  as  parts 
of the TV).
x 2x 2
(For 42/47/55LE530C)
RJw~ºJW6TDrJ+TPXrFW~uWºo;J+TFW~uWºs