LG 26LG4000 Owners Manual

							19
EXTERNAL EQIPMENT SETUP
NOTE!
GTo enjoy vivid picture and sound, connect a PC to
the TV.
GAvoid keeping a fixed image on the TV’s screen for
prolonged periods of time. The fixed image may
become permanently imprinted on the screen; use
a screen saver when possible.
GConnect the PC to the RGB (PC) or HDMI IN (or
HDMI/DVI IN) port of the TV; change the 
resolution.
GThere may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
GThe synchronization input waveform for
Horizontal and Vertical frequencies are separate.
GConnect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or
the signal cable from the HDMI output port of the
PC to the HDMI IN (or HDMI/DVI IN) port on the
TV.
GConnect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included
with the TV).
GIf using a sound card, adjust PC sound as required.
GThis TV uses a VESA Plug and Play Solution. The
TV provides EDID data to the PC system with a
DDC protocol. The PC adjusts automatically when
using this TV.
GDDC protocol is preset for RGB (Analog RGB),
HDMI (Digital RGB) mode.
GIf required, adjust the settings for Plug and Play
functionality.
GIf the graphic card on the PC does not output 
analogue and digital RGB simultaneously, connect
only one of either RGB or HDMI IN (or HDMI/DVI
IN) to display the PC output on the TV.
GIf the graphic card on the PC does output 
analogue and digital RGB simultaneously, switch
the TV to either RGB or HDMI; (the other mode is
set to Plug and Play automatically by the TV.)
GDOS mode may not work depending on the video
card if you use a HDMI to DVI cable.
GIf you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.
RGB IN (PC)
OPTICAL
DIGITAL
AUDIO OUTAV  1
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN(RGB/DVI)
HDMI/DVI IN
2
1(DVI)
IN
VIDEO
AUDIO
AUDIODVI-PC OUTPUT
USB IN
SERVICE ONLYConnecting with a HDMI to DVI cable
Connect the DVI output of the PC to the H HD
DM
MI
I/
/D
DV
VI
I 
 I
IN
N
1 1(
(D
DV
VI
I)
) 
 
jack on the TV.
Connect the PC audio output to the A AU
UD
DI
IO
O 
 I
IN
N
( (R
RG
GB
B/
/D
DV
VI
I)
)
jack on the TV.
Turn on the PC and the TV.
Select HDMI 1input source using the I IN
NP
PU
UT
T
button
on the remote control.
2
3
4
1
12
 Ofrecido por www.electromanuales.com
 
						

							20
EXTERNAL EQIPMENT SETUP
Supported Display Resolution
70.08
59.94
75.00
60.31
75.00
74.55
60.00
70.00
75.029
59.87
59.8
59.6
RGB[PC], HDMI[PC] mode
31.468
31.469
37. 684
37. 879
46.875
49.725
48.363
56.470
60.123
47. 78
47. 72
47. 56
Resolution
640x480
800x600
832x624 720x400
1024x768Horizontal
Frequency(kHz)Vertical
Frequency(Hz)
1280x768
1360x768
1366x768
HDMI[DTV] mode
EXTERNAL EQUIPMENT SETUP
56.94 / 60
59.94 / 60
50
50
50
59.94 / 60
59.94 / 60
50.00
23.97 / 24
29.976 / 30.00
50
59.94 / 60 15.734 / 15.6
31.469 / 31.5
15.625
31.25
37. 50 0
44.96 / 45
33.72 / 33.75
28.125
26.97 / 27
33.716 / 33.75
56.250
67.43 / 67.5
Resolution
720x480
720x576
1920x10801280x720Horizontal
Frequency(kHz)Vertical
Frequency(Hz)
 Ofrecido por www.electromanuales.com
 
						

							21
EXTERNAL EQIPMENT SETUP
Screen Setup for PC mode
Returns to the default settings Position, Size and Phase at the factory.
This function works in the following mode : RGB[PC].
Screen Reset
1
Select PICTURE.
2
Select SCREEN.
3
Select Reset.
5
Run Reset.
• Contrast : 70
• Brightness : 50
• Sharpness : 50
• Colour : 50
• Tint : 0
• Advanced Control
• Picture Reset
PICTUREMoveOKD
Screen
To  S e t
Auto Config.
SCREENMove
Prev.RETURN
Resolution
Position
Size
Phase
ResetG
MENU
OK 
OK 
OK 
4
Select Ye s.OK 
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
 Ofrecido por www.electromanuales.com
 
						

							22
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQIPMENT SETUP
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the
picture phase manually.
This function works in the following mode : RGB[PC].
Adjustment for screen Position, Size, Phase
1
Select PICTURE.
2
Select SCREEN.
3
Select Position, Size or Phase.
4
Make appropriate adjustments.
• Contrast : 70
• Brightness : 50
• Sharpness : 50
• Colour : 50
• Tint : 0
• Advanced Control
• Picture Reset
PICTUREMoveOKD
Screen
Auto Config.
SCREENMove
Resolution
PositionG
Size
Phase
Reset
G FD
E
MENU
OK 
OK 
Prev.RETURN
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
 Ofrecido por www.electromanuales.com
 
						

							23
EXTERNAL EQIPMENT SETUP
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC] mode.
Selecting Resolution
1
Select PICTURE.
2
Select SCREEN.
3
Select Resolution.
4
Select the desired resolution.
• Contrast : 70
• Brightness : 50
• Sharpness : 50
• Colour : 50
• Tint : 0
• Advanced Control
• Picture Reset
PICTUREMoveOKD
Screen
10 2 4  x  7 6 8
12 8 0  x  7 6 8
13 6 0  x  7 6 8
13 6 6  x  7 6 8
Auto Config.
SCREENMove
ResolutionG
Position
Size
Phase
Reset
MENU
OK 
OK 
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
Prev.RETURN
 Ofrecido por www.electromanuales.com
 
						

							24
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQIPMENT SETUP
1
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, your TV is functioning properly but needs further adjustment.
A Au
ut
to
o 
 c
co
on
nf
fi
ig
gu
ur
re
e
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will
be unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
• Press the MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
•If the position of the image is still not correct,
try Auto adjustment again.
•If picture needs to be adjusted again after Auto
adjustment in RGB (PC), you can adjust the
P Po
os
si
it
ti
io
on
n
, S Si
iz
ze
e 
 
or P Ph
ha
as
se
e
.
Select PICTURE.
2
Select SCREEN.
3
Select Auto Config..
• Contrast : 70
• Brightness : 50
• Sharpness : 50
• Colour : 50
• Tint : 0
• Advanced Control
• Picture Reset
PICTUREMoveOKD
Screen
To  S e t
Auto Config.G
SCREENMove
Resolution
Position
Size
Phase
Reset
MENU
OK 
OK 
Prev.RETURN
5
Run Auto Config..OK 
4
Select Ye s.OK 
 Ofrecido por www.electromanuales.com
 
						

							
25
WATCHI\bG TV / \fROGRAMME CO\bTROL
WATCHI\bG TV / \fROGRAMME CO\bTROL

DISC MENUMENU/
SETUP
ROTATE+ROTATE-
DISPLAY ZOOM
SUBTITLEAUDIOANGLE
PBC
REPEAT A-B
TITLE MENU
EJECT 
RETURN

\fOWER
I\b\fUT
DVD Control buttons
TV/RAD See a lis\b of A\f devices connec\bed \bo T\f.
When you \boggle \bhis bu\b\bon, \bhe Simplink menu appears
a\b \bhe screen.
Swi\bches \bhe T\f on from s\bandby or off \bo s\bandby.
Ex\bernal inpu\b mode ro\ba\be in regular sequence.
Swi\bches \bhe T\f on from s\bandby.
Con\brols \bhe Buil\b-In D\fD Opera\bion.
For fur\bher de\bails, see \bhe ‘D\fD Opera\bion’ sec\bion.
Selec\bs Radio, T\f, DT\f channel.
Q. ME\bU
ME\bU
SETU\f
GUIDESelec\b \bhe desired quick menu source.
Selec\bs a menu.
Clears  all  on-screen  displays  and  re\burns  \bo  T\f  viewing
from any menu.
Displays \bhe D\fD menu when s\bop playback fully. Shows programme schedule.
THUMBSTICK(Up/Down/Left Right)
OK
RETUR\b(EXIT)
I\bFO  i  
AV MODE
Allows you \bo naviga\be \bhe on-screen menus and adjus\b
\bhe sys\bem se\b\bings \bo your preference.
Accep\bs your selec\bion or displays \bhe curren\b mode.
Allows \bhe user \bo move back one s\bep in an in\berac\bive
applica\bion, EPG or o\bher user in\berac\bion func\bion.
Shows \bhe presen\b screen informa\bion.
I\b helps you selec\b and se\b images and sounds when
connec\bing A\f devices.
Coloured  buttons These bu\b\bons are used for \bele\bex\b (on 
T T
E
EL
LE
E T
T E
EX
X T
T
models only) ,  P
P
r
ro
o g
gr
ra
a m
m m
me
e 
 e
e d
d i
i\b
\b
.
TELETEXT
BUTTO\bS
SUBTITLE These bu\b\bons are used for \bele\bex\b.
For fur\bher de\bails, see \bhe ‘Tele\bex\b’ sec\bion.
Recalls your preferred sub\bi\ble in digi\bal mode.
1
1
2
REMOTE CO\bTROL KEY FU\bCTIO\bS
When using \bhe remo\be con\brol, aim i\b a\b \bhe remo\be con\brol sensor on \bhe T\f.

1
2
 Ofrecido por www.electromanuales.com
 
						

							
26
WATCHI\bG TV / \fROGRAMME CO\bTROL
WATCHI\bG TV / \fROGRAMME CO\bTROL

DISC MENUMENU/
SETUP
ROTATE+ROTATE-
DISPLAY ZOOM
SUBTITLEAUDIOANGLE
PBC
REPEAT A-B
TITLE MENU
EJECT 
RETURN

VOLUME U\f
/DOW\b
FAV
MUTE
\frogramme U\f/DOW\b
\fA G E
U\f/DOW\b
0 ~9 number
button
LIST
Q.VIEW Adjusts t\be vo\f
ume.
Disp\fays t\be se\fected favourite programme.
Switc\bes t\be sound on or off.
Se\fects a programme.
Move from one fu\f\f set of screen information to t\be next
one.
Se\fects a programme.
Se\fects numbered items in a menu.
Disp\fays t\be programme tab\fe.
Returns to t\be previous\fy viewed programme.

Inst\blling \f\btteries
 Open t\be battery compartment cover on t\be back and insta\f\f t\be
batteries matc\bing correct po\farity (+wit\b +,-wit\b -). 
Insta\f\f two 1.5V AAA batteries. Do not mix o\fd or used batteries
wit\b new ones.
C\fose cover.
SIM\fLI\bK 
control buttons Contro\fs simp\fink.
 Ofrecido por www.electromanuales.com
 
						

							27
WATCHING TV / PROGRAMME CONTROL
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
In standby mode to turn TV on, press ther r 
/ I, INPUTor P button on the TV or press thePOWER,
INPUT, P or NUMBERbutton on the remote control and the TV will switch on.
2
1
TURNING ON THE TV
Initializing setup 
Note: 
a. It will automatically disappear after approx. 40 seconds unless a button is pressed.
b. Press the RETURNbutton to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not
work, depending on the DTV broadcasting environment.
d. "Home” mode is the optimal setting for home environments, and is the TV's default mode.
e. "In Store" mode is the optimal setting for store environments.“ If a user modifies image quality data,
“In Store” mode initializes the product to the image quality set by us after a certain period of time.
f. The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
Language, Select Mode, Country, Time Zone, Auto programme tuning. - When your TV is turned on, you will be able to use its features.
PROGRAMME SELECTION
Press the P or NUMBERbuttons to select a programme number.1
VOLUME ADJUSTMENT
Press the+ -button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE, + -button.1
 Ofrecido por www.electromanuales.com
 
						

							28
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
• A As
sp
pe
ec
ct
t 
 R
Ra
at
ti
io
o 
 
: Selects your desired picture format.
For Zoom Setting, select 14:9, Zoom1 and Zoom2 in
Ratio Menu. After completing Zoom Setting, the dis-
play goes back to Q.Menu.
• B Ba
ac
ck
kl
li
ig
gh
ht
t 
 
: Adjusts screen brightness.
It returns to the default settings brightness by
changing mode source.
• P Pi
ic
ct
tu
ur
re
e 
 M
Mo
od
de
e
: Selects your desired Picture Mode.
• S So
ou
un
nd
d 
 M
Mo
od
de
e
: It is a feature to automatically set the
sound combination which it deems the best for the
images being watched. Selects your desired Sound
Mode.
• A Au
ud
di
io
o
: Selects the sound output.
• S Sl
le
ee
ep
p 
 T
Ti
im
me
er
r
: Sets the sleep timer.
QUICK MENU
Display each menu.
Select your desired Source.  Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
1Q. MENU
3 2
OK 
OK 
• Press the Q. MENUbutton to return to normal TV viewing.
• Press the RETURNbutton to move to the previous menu screen.
or
Q.Menu
Close
F F 
  
  
  
  
  
  
 0G
G
16:9
Zoom Setting
Standard
Standard
MONO
Aspect Ratio
Backlight
Picture Mode
Sound Mode
Audio
Sleep Timer
Off
 Ofrecido por www.electromanuales.com