LG 32LG3000 Owners Manual
Have a look at the manual LG 32LG3000 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9 PREPARATION AUDIO IN (RGB/DVI) YPBPRLR VIDEOCOMPONENT IN AUDIO EJECT PCMCIA CARD SLOT RS-232C IN (CONTROL & SERVICE) SERVICE ONLYRGB (PC) IN HDMI/DVI IN AV 1AV 2 ANTENNA IN 5324 7810 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. RGB/DVI Audio Input Connect the audio from a PC or DTV. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.)Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. Component Input Connect a component video/audio device to these jacks. RGB Input Connect the output from a PC. SERVICE ONLY PORT1 2 3 4 5 6 7 8 9 10 6 1 9 LCD TV Models : 19/22LS4D *
10 PREPARATION PREPARATION 13 4 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2Assemble the parts of the S St ta an nd d B Bo od dy y with the C Co ov ve er r B Ba as se e of the TV.Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV. Stand Body Cover Base STAND INSTALLATION (LCD TV Models: 26/32/37/42LG30 **, 32/37/42LG50 **) AWhen assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. (Only 19/22LG30**) Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the S ST TA AN ND D B BO OD DY Y with C CO OV VE ER R B BA AS SE E of the TV. Insert the S ST TA AN ND D B BO OD DY Y into a C CO OV VE ER R B BA AS SE E until clicking sound. Assemble the TV as shown. 1 2 3 Stand Body Cover Base
11 PREPARATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV. (Only 42PG10 **, 42PG20 **, 42PG30 **) 1 2 3
12 PREPARATION PREPARATION STAND INSTALLATION(Only 19/22LS4D *) ■Image shown may differ from your TV. 1 2 3 4 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Hold the H Hi in ng ge e B Bo od dy y and bend it upward. Hinge Body Insert the S St ta an nd d B Bo od dy y into the TV until clicking sound. Assemble the parts of the S St ta an nd d B Bo od dy y with the C Co ov ve er r B Ba as se e of the TV. Cover Base Stand Body Swivel Stand (Except for 19/22LS4D *, 50PG10 **) After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.
13 PREPARATION DETACHING STAND(Only 19/22LS4D *) 1 2 3 Place the tv with its front facing downward on a cushion or soft cloth. Pull the C Co ov ve er r B Ba as se e backward during pressing a button on the S St ta an nd d B Bo od dy y . Hold the C Co ov ve er r B Ba as se e and pull with shake it backward to separate from the S St ta an nd d B Bo od dy y . 4Hold the S St ta an nd d B Bo od dy y and bend it upward. 5Pull stand body to separate from the TV during pressing 2 latches. ■Image shown may differ from your TV.
14 PREPARATION PREPARATION PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER. ■You should purchase necessary components to fix the TV to the wall on the market. ■Position the TV close to the wall to avoid the possibility of it falling when pushed. ■The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV. NOTE! G When moving the TV undo the cords first. G Use a platform or cabinet strong and large enough to support the size and weight of the TV. G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. 3 1 2 Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall. 3Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV. 2 1 2 1
15 PREPARATION BACK COVER FOR WIRE ARRANGEMENT PLASMA TV Models Connect the cables as necessary. To connect additional equipment, see the E Ex xt te er rn na al l E Eq qu ui ip pm me en nt t S Se et tu up p section.1 Install the C CA AB BL LE E M MA AN NA AG GE EM ME EN NT T C CL LI IP P as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables.2 CABLE MANAGEMENT CLIP Hold the C CA AB BL LE E M MA AN NA AG GE EM ME EN NT T C CL LI IP P with both hands and pull it upward. * For the 42PG10 **model, press the center of the CABLE MANAGEMENT CLIP and then lift up it. How to remove the cable management clip (Only 42/50PG10 **) (Only 42/50PG20 **, 42/50/60PG30 **) (Only 42/50PG10 **) (Only 42/50PG20 **, 42/50/60PG30 **) CABLE MANAGEMENT CLIPCABLE HOLDERCABLE HOLDER
16 PREPARATION PREPARATION LCD TV Models: 26/32/37/42LG30 ** 32/37/42/47/52LG50 ** Connect the cables as neces- sary. To connect additional equip- ment, see the External Equipment Setupsection of the manual.1 Open the C CA AB BL LE E M MA AN NA AG GE EM ME EN NT T C CL LI IP P as shown and manage the cables.2 CABLE MANAGEMENT CLIP Fit the C CA AB BL LE E M MA AN NA AG GE EM ME EN NT T C CL LI IP P as shown.3 Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section.1 Install the CABLE MANAGEMENT CLIP as shown.2 First, press the cable management. Hold the C CA AB BL LE E M MA AN NA AG GE EM ME EN NT T C CL LI IP P with both hands and pull it upward. NOTE! G GDo not use the CABLE MANAGEMENT CLIPto lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. How to remove the cable management clip (LCD TV Models : 19/22LS4D *) LCD TV Models : 19/22LS4D *
17 PREPARATION LCD TV Models : 19/22LG30** Connect the cables as necessary. To connect additional equipment, see the External Equipment Setupsection of the manual.1 Install the CABLE MANAGEMENT CLIP as shown.2 CABLE MANAGEMENT CLIP NOTE ! G GDo not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. How to remove the cable management clip G GHold the CABLE MANAGEMENT CLIP with both hands and pull it backward.
18 PREPARATION PREPARATION POSITIONING YOUR DISPLAY(Only 19/22LG30 **, 19/22LS4D *) ■Image shown may differ from your TV. ■Adjust the position of the panel in various ways for maximum comfort.• Tilt range10~1230 LOCATION(Only 19/22LG30 **, 19/22LS4D *) Position your TV so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the tv to any unnecessary vibration, moisture, dust or heat. Also ensure that the TV is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the back of the TV. When you install the TV to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. KENSINGTON SECURITY SYSTEM(Only 19/22LG30 **, 19/22LS4D *) The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kensington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors. NOTE - The Kensington Security System is an optional accessory. NOTES a. If the TV feels cold to the touch, there may be a small “flicker” when when it is turned on. This is normal, there is nothing wrong with TV. b. Some minute dot defects may be visible on the screen, appear- ing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.