LG Bh6420p Owners Manual

Connecting21
Connecting2
 yIf your TV does not accept the resolution 
you have set on the pla
yer, you can set 
resolution to 480p as follows:
1.
 Press  B to open the disc tra

y.
2
 Press  Z (STOP) f

or more than 5 seconds.
 yWhen you set the resolution to 480i with 
HDMI connection, ac

tual resolution is 
outputted to 480p.
 y If you select a resolution manually and then 
connec

t the HDMI jack to TV and your TV 
does not accept it, the resolution setting is 
set to [Auto].
 y If you select a...

22
Connecting2
Connecting
Connections with 
external device
AUX Connection
You can enjoy the sound from an external 
component through the speakers of this system.
Connect the analog audio output jacks of your 
component into the AUX L/R (INPUT ) on this unit. 
And then select the [AUX] option by pressing 
FUNCTION and ENTER (b).
You can also use the F (Function) button on the 
front panel to select the input mode.
To the audio output jacks  of your component  ( TV, VCR, etc.)
Rear of the unit
RedWhite...

Connecting23
Connecting2
OPTICAL IN connection
You can enjoy the sound from your component 
with a digital optical connection through the 
speakers of this system.
Connect the optical output jack of your component 
into the OPTICAL IN jack on the unit. And then 
select the [OPTICAL] option by pressing FUNCTION 
and ENTER (
b). Or press OPTICAL to select directly.
You can also use the F (Function) button on the 
front panel to select the input mode.
To the digital 
optical output jack 
of your component...

Connecting
24
Connecting2
Connecting to your 
Home Network
This player can be connected to a local area 
network (LAN) via the LAN port on the rear panel. 
By connecting the unit to a broadband home 
network, you have access to services such as 
software updates, BD-LIVE interactivity and on-line 
content services.
Wired network connection
Using a wired network provides the best 
performance, because the attached devices 
connect directly to the network and are not subject 
to radio frequency...

Connecting25
Connecting2
Wired Network Setup
If there is a DHCP server on the local area network 
(LAN) via wired connection, this player will 
automatically be allocated an IP address. After 
making the physical connection, a small number of 
home networks may require the player’s network 
setting to be adjusted. Adjust the [NETWORK] 
setting as follow.
Preparation
Before setting the wired network, you need to 
connect the broadband internet to your home 
network.
1. Select [Connection Setting] option...

Connecting
26
Connecting2
Notes on Network Connection:
 y Many network connection problems during 
set up can often be fixed by re-setting the 
router or modem. After connecting the player 
to the home network, quickly power off and/
or disconnect the power cable of the home 
network router or cable modem. Then power on 
and/or connect the power cable again.
 yDepending on the internet service provider (ISP), 
the number of devices that can receive internet 
service may be limited by the applicable terms...

Connecting27
Connecting2
USB device connection
This player can play movie, music and photo files 
contained in the USB device.
Playback content in the USB 
device
1. Insert a USB device to the USB port until it fits into place.
When you connect the USB device on the HOME menu, the player plays only music file contained 
in the USB storage device automatically. If the USB 
storage device is containing various types of files, a 
menu for the file type selection will appear.
File loading may takes few...

3 System Setting
System Setting
28
System  Setting3
Settings
Initial Setup
When you turn on the unit for the first time, the 
initial setup wizard appears on the screen. Set the 
display language, network settings and speaker 
setup on the initial setup wizard.
1. Press 1  (POWER). 
The initial setup wizard appears on the screen.
2. Use W/S/A/D  to select a display language 
and press ENTER ( b).
3. Read and prepare the preparations for the network settings and then press ENTER (
b) 
while [Start] is...

System Setting29
System Setting3
Adjust the Setup Settings
You can change the settings of the player in the 
[Setup] menu.
1. Press HOME ().
2. Use A/D to select the [Setup] and press 
ENTER ( b). The [Setup] menu appears.
3. Use W/S  to select the first setup option, and 
press  D to move to the second level.
4. Use W/S  to select a second setup option, and 
press ENTER ( b) to move to the third level.
5. Use W/S  to select a desired setting, and press 
ENTER ( b) to confirm your selection.
 

System Setting
30
System  Setting3
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to your TV 
type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected. 
Displays theatrical images with masking bars 
above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected. 
Displays pictures cropped to fill your TV screen. 
Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected. The 
4:3 picture is displayed with an...