LG Dh3120s Owners Manual

							Getting Started11
Getting St\frted1
Remote \bontro\f
1
3
4
2
5
Battery Insta\f\fation
Remove	the	battery	cover	on	the	rear	of	the	Remote	Control,	and	insert	one	(size	AAA)	battery	with	4	and	\f	matched	correctly.
•  •  •  •  •  •  \aa •  •  •  •  • 
FUNCTION :	Selects	the	function	and	input	source.	
SLEEP :	Sets	the	system	to	turn	off	automatically	at	a	specified	time.	(Dimmer	:	The	display	window	will	be	darken	by	half.)
POWER :	Switches	the	unit	ON	or	OFF.
OPEN/CLOSE :	Opens	and	closes	the	disc	Drawer.
TITLE :	If	the	current	DVD	title	has	a	menu,	the	title	menu	appears	on	the	screen.	Otherwise,	the	disc	menu	may	not	appear.
•  •  •  •  •  •  \ab •  •  •  •  • 
DISPLAY :	Accesses	On-Screen	Display.
MENU :	Accesses	the	menu	on	a	DVD	disc.
SETUP :	Accesses	or	removes	setup	menu.	
PRESET (WS) :	Selects	programme	of	Radio.
TUN. (-/+) : Tunes	in	the	desired	radio	station.
W/S/A/\b (up/ \bown/ lef\f/ righ\f):	Used 	to 	navigate 	on-screen	displays.
ENTER (b) :	 Acknowledges 	menu	selection.
RETURN (x) : Moves	backwards	in	the	menu	or	exits	the	setup	menu.
REC (X) :	USB	Direct	Recording.
•  •  •  •  •  •  \ac •  •  •  •  • 
STOP (Z) :	Stops	playback	or	recording.
PLAY (d), MO./ST. :	Starts	playback.	Selects	Mono/	Stereo.
PAUSE/STEP (M) :	Pauses	playback.	
SKIP (C/V)	: Goes	to	next	or	previous	chapter/	track/	file.	
SCAN (c/v) :	Searches	backward	or	forward.
•  •  •  •  •  •  \ad •  •  •  •  • 
REPEAT/RANDOM :	Selects	a	play	mode.(Random,	repeat)
MUTE :	Mutes	the	sound.
VOL (Volume) (+/-) :	Adjusts	speaker	volume.
LG EQ (9) :	Selects	a	NAT	P\bUS	or	\bocal	Specialization	equalizer	effect	by	using	\bG	EQ.
EQ$ (EQUALIZER effec\f) :	Chooses	sound	impressions.
CLEAR :	Removes	a	track	number	on	the	Program	\bist.
SUBTITLE :	 During 	playback, 	press	SUBTITLE	repeatedly 	to 	select 	a 	desired 	subtitle 	language 	.
0 \fo 9 numerical bu\f\fons :	Selects	numbered	options	in	a	menu.
•  •  •  •  •  •  \ae •  •  •  •  • 
TV Con\frol bu\f\fons : Controls 	the	TV.	(\bG	 TV	only)
	-You	can	control	the	sound	level,	input	source,	and	power	switching	of	\bG	 TVs	as	well.	\fold	POWER	( TV )	and	press	PR/C\f	(+/–)	button	repeatedly	until	the	TV	turns	on	or	off.
PROG./MEMO. :	Accesses	or	removes	Program	menu.
?: This	button	is	not	available.
RDS :	Radio	Data	System.
PTY :	Views	the	various	displays	of	the	RDS.	
DH3120S-D0_BGBRLLK_ENG_6163.indd   112012-02-13   �� 12:22:18 
						

							2	 Connecting
Conne\bting12
Connecting2
Conne\bting the 
speakers
Atta\bhing the speakers to the 
unit
To	connect	the	cable	to	the	unit,	press	each	plastic	finger	pad 	to 	open 	the 	connection 	terminals 	on 	the	unit.	Insert	the	wire	and	release	the	finger	pad.
Connect	the	black	stripe	of	each	wire	to	the	terminals	marked	-	(minus)	and	the	other	end	to	the	terminals	marked	+	(plus).
Speaker connection
	
y Be	careful	to	make	sure	children	not	to	put	
their
	hands 	or 	any 	objects 	into 	the 	*speaker	
duct.	
*Speaker	duct:	A	hole	for	plentiful	bass	
sound	on	speaker	cabinet	(enclosure).
	
y The	speakers	contain	magnet	parts,	so	
color	irregularity	may	occur	on	the	
TV	
screen	or	PC	monitor	screen.	Please	use	the	
speakers	far	away	from	either	 TV	screen	or	
PC	monitor. 
>C\fution
Positioning the System
The	following	illustration	shows	an	example	of	positioning	the	system.
Note 	that 	the 	illustrations 	in 	these 	instructions 	differ	from	the	actual	unit	for	explanation	purposes.
For	the	best	possible	surround	sound,	all	the	speakers	other	than	the	subwoofer	should	be	placed	at	the	same	distance	from	the	listening	position	().
Speaker Positioning
		 Front	left	speaker	(\b)/		Front	right	speaker	(R):Place	the	front	speakers	to	the	sides	of	the	monitor	or	screen	and	as	flush	with	the	screen	surface	as	possible.
		Center	speaker:	Place	the	center	speaker	above	or	below	the	monitor	or	screen.
		Surround	left	speaker	(\b)/		Surround	right	speaker	(R):	Place	these	speakers	behind	your	listening	position,	facing	slightly	inwards.
		Subwoofer:	 The	position	of	the	subwoofer	is	not	so	critical,	because	low	bass	sounds	are	not	highly	directional.	But	it	is	better	to	place	the	subwoofer	near	the	front	speakers.	 Turn	it	slightly	toward	the	center	of	the	room	to	reduce	the	wall	reflections.	
	Unit
AB
D E
F
AAA
A
A
GC
DH3120S-D0_BGBRLLK_ENG_6163.indd   122012-02-13   �� 12:22:19 
						

							Conne\bting13
Connecting2
Conne\btions to Your 
TV
Make	one	of	the	following	connections,	depending	on	the	capabilities	of	your	existing	equipment.
	
y Depending	on	your	
TV	and	other	
equipment	you	wish	to	connect,	there	are	
various	ways	you	could	connect	the	player.	
Use	only	one	of	the	connections	described	
in	this	manual.
	
y Please	refer	to	the	manuals	of	your	
TV,	
Stereo 	System 	or 	other 	devices 	as 	necessary	
to	make	the	best	connections. 
,Note
	
y Make	sure	the	unit	is	connected	directly	
to	the	
TV.	Tune	the	 TV	to	the	correct	video	
input	channel
	
y Do	not	connect	your	player	via	your	
VCR.	
The	image	could	be	distorted	by	the	copy	
protection	system. 
>C\fution
Component Video Conne\btion
Connect	the	COMPONENT	 VIDEO	(PROGRESSIVE	SCAN)	OUTPUT	jacks	on	the	unit	to	the	corresponding	input	jacks	on	the	 TV	using	Y	PB	PR	cables.	
You	can	hear	the	sound	through	the	system’s	speakers.
If	your	TV	accepts	progressive	format	signals,	
you	must	use	this	connection	and	set	
[Progressive	Scan]	in	[Display]	setup	to	[On]	
(See	page	17). 
,Note
DH3120S-D0_BGBRLLK_ENG_6163.indd   132012-02-13   �� 12:22:20 
						

							Conne\bting1\b
Connecting2
Video Conne\btion
Connect	the	MONITOR	jack	on	the	unit	to	the	video	in	jack	on	the	TV	using	a	video	cable.
You	can	hear	the	sound	through	the	system’s	speakers.
SCART Conne\btion
Connect	the 	SCART 	jack 	on 	the 	unit 	to 	the 	SCART 	in	jack	on	the	 TV	using	a	video	cable.
You	can	hear	the	sound	through	the	system’s	speakers.
Optiona\f Equipment 
Conne\btion
AUX IN Conne\btion
Connect	an	Output	of	auxiliary	device	to	the	AUX	(\b/R)	INPUT	Connector.
If	your	TV	has	only	one	output	for	audio	(mono),	connect	it	to	the	left	(white)	audio	jack	on	the	unit.
AUDIO IN (P. IN)  Conne\btion
Connect	an	OUTPUT	of	portable	device	(MP3	or	PMP	etc)	to	the	P.	IN	connector.	
MP3	player,	etc...
DH3120S-D0_BGBRLLK_ENG_6163.indd   142012-02-13   �� 12:22:20 
						

							Conne\bting15
Connecting2
USB Conne\btion
Connect	the	USB	port	of	USB	Memory	(or	MP3	player,	etc.)	to	the	USB	port	on	the	front	of	the	unit.
Removing \fhe USB Device from \fhe uni\f
1.	 Choose	a	different	function	mode	or	press	STOP	(Z)	twice	in	a	row.
2.		 Remove	the	USB	device	from	the	unit.
Antenna Conne\btion
Connect	the	supplied	FM	antenna	for	listening	to	the	radio.
Connect	the	FM	Wire	antenna	to	the	FM	antenna	connector.
Be	sure	to	fully	extend	the	FM	wire	antenna.	
After	connecting	the	FM	wire	antenna,	keep	it	
as	horizontal	as	possible. 
,Note
DH3120S-D0_BGBRLLK_ENG_6163.indd   152012-02-13   �� 12:22:21 
						

							3	 System	Setting
System Setting16
System Setting3
Adjust the Setup 
settings
By	using	the	Setup	menu,	you	can	make	various	adjustments	to	items	such	as	picture	and	sound.
You	can	also	set	a	language	for	the	subtitles	and	the	Setup 	menu, 	among 	other 	things. 	For 	details 	on	each	Setup	menu	item,	see	pages	16	to	19.
OSD Initia\f \fanguage\b settings 
- Optiona\f
During	the	first	use	of	this	unit,	the	initial	language	setup	menu	appears	on	your	 TV	screen.	You	must	complete	initial	language	selection	before	using	the	unit.	English	will	be	selected	as	the	initial	language.
1.	 Press	POWER	to	turn	the	unit	on.	 The	language	setup	menu	will	appear	on	the	screen.
2.	Use	WSA\b to	select	a	language	then	press	ENTER.	The	confirm	menu	will	appear.	
3.	 Use	A\b	to	select	the	[Enter]	then	press	ENTER	to	finish	the	language	setup.
To disp\fay and exit \bthe Setup 
Menu
1.	 Select	the	DVD/CD	or	USB	function	by	pressing	FUNCTION.
2.	 Press	SETUP.	Displays	the	[Setup]	Menu.
3.	 Press	SETUP	or	RETURN	to	exit	in	the	[Setup]	Menu.
To disp\fay and exit \bthe Setup 
Menu
1.	 Select	the	DVD/CD	or	USB	function	by	pressing	FUNCTION.
2.	 Press	SETUP.	Displays	the	[Setup]	Menu.
3.	 Press	SETUP	or	RETURN	to	exit	in	the	[Setup]	Menu.
Abou\f help menu for Se\fup
MenuBu\f\fons Opera\fion
w/s
MoveWSMoving	to	another	menu.
a
Prev.AMoving	to	previous	level.
dSelec\f\bMoving	to	next	level	or	selecting	menu.
xRETURNTo	exit	the	[Setup]	menu	or 	[ 	5.1 	Speaker	Setup].
bENTERTo	confirm	menu.
LANGUAGE
Menu Language
Select	a	language	for	the	Setup	menu	and	then	on	screen	display.
Dis\b Audio / Dis\b Subtit\fe / Dis\b 
Menu
Select	the	language	you	prefer	for	the	audio	track	(disc	audio),	subtitles,	and	the	disc	menu.
DH3120S-D0_BGBRLLK_ENG_6163.indd   162012-02-13   �� 12:22:21 
						

							System Setting17
System Setting3
[Original]
Refers	to	the	original	language	in	which	the	disc	was	recorded.
[O\fher]
To	select	another	language,	press	numeric	buttons	and	then	ENTER	to	enter	the	corresponding	4-digit	number	according	to	the	language	code	list	on	the	page	30.	If	you	enter	the	wrong	language	code,	press	CLEAR.
[Off (for Disc Sub\fi\fle)]
Turn	off	Subtitle.
DISPLAY
TV Aspe\bt
Select	which	screen	aspect	to	use	based	on	the	shape	of	your	TV	screen.	
[4:3]
Select	when	a	standard	4:3	 TV	is	connected.
[16:9]
Select	when	a	16:9	wide	TV	is	connected.
Disp\fay Mode
The	Display	Mode	setting	works	only	when	the	 TV	Aspect	mode	is	set	to	4:3.
[Le\f\ferbox]
Displays	a	wide	picture	with	bands	on	the	upper	and	lower	portions	of	the	screen.
[Panscan]
Automatically	displays	the	wide	picture	on	the	entire	screen	and	cuts	off	the	portions	that	do	not	fit.	(If	the	disc/file	is	not	compatible	with	Pan	Scan,	the	picture	is	displayed	at	\betterbox	ratio.)
TV Output Se\fe\bt 
Select	an	option	according	to	the	TV	connection	type.
[RGB]
When	your	TV	is	connected	with	the	SCART	jack.
[YPBPR]
When	your	TV	is	connected	with	the	COMPONENT/	PROGRESSIVE	SCAN	jacks	on	the	unit.
If	you	change	 TV	Output	Select	to	RGB	from	
YPbPr	on	the	setup	menu	especially	when	
connecting	the	unit	in	the	way	of	component	
video	connection,	the	screen	turns	black.	
In	that	case,	connect	the	video	cable	to	
MONITOR	jack	and	select	 YPbPr	on	the	setup	
menu	again. 
,Note
Progressive S\ban (For Component 
Video \bonne\btions)
Selects	whether	the	COMPONENT	VIDEO(PROGRESSIVE	SCAN)	OUTPUT	jacks	output	progressive	signal.	If	your	 TV	accepts	progressive	format	signals,	you	will	enjoy	accurate	color	reproduction	and	high	quality	image	by	selecting	[On].	If	your	TV	does	not	accept	progressive	format	signals,	select	[Off ].
If	you 	set 	Progressive 	Scan 	to 	[On] 	in 	error, 	you 	must	reset	the	unit.	First,	remove	the	disc	in	the	unit.	Next,	press	and	hold	STOP	(Z)	for	five	seconds.	The	video	output	will	be	restored	to	the	standard	setting,	and	a	picture	will	be	visible	on	your	 TV.
DH3120S-D0_BGBRLLK_ENG_6163.indd   172012-02-13   �� 12:22:21 
						

							System Setting18
System Setting3
AUDIO
DRC (Dynami\b Range Contro\f) 
Make	the	sound	clear	when	the	volume	is	turned	down	(Dolby	Digital	only).	Set	to	[On]	for	this	effect.
Vo\ba\f
Select	[On]	to	mix	karaoke	channels	into	normal	stereo.
This	function	is	effective	for	multi-channel	karaoke	DVDs	only.
5.1 Speaker Setup
Make	the	following	settings	for	the	built-in	5.1	channel	surrounds	decoder.
1.	 Press	SETUP.
2.	 Use	WS	to	select	AUDIO	menu	and	then	press	\b.
3.	 Use WS	to	select	[5.1	Speaker	setup]	menu	
and	then	press	\b.
4.	 Press	ENTERThe	[5.1	Speaker	setup]	appears.
5.	 Use	A\b	to	select	the	desired	speaker.
6.	 Adjust	options	using	WSA\b buttons.
7.	 Press	RETURN	to	confirm	your	selection.	Return	to	the	previous	menu.
[Speaker]
Select	a	speaker	that	you	want	to	adjust.
Certain	speaker	settings	are	prohibited	by	the	
Dolby	Digital	licensing	agreement. 
,Note
[Size]
Since	the	speaker	settings	are	fixed,	you	cannot	change	the	settings.
[Volume]
Press	A\b to	adjust	the	output	level	of	the	selected	speaker.
[Dis\fance]
After	you	connected	speakers	to	your	unit,	set	the	Distance	between	the	speakers	and	your	listening	point	if	the	distance	of	Center	or	Rear	speakers	is	bigger	than	the	distance	of	Front	speakers.	 This	allows	the	sound	from	each	speaker	to	reach	the	listener	at	the	same	time.	Press	A\b to	adjust	the	Distance	of	the	selected	speaker.	This	distance	is	equivalent	to	a	difference	of	the	distance	between	Center	or	Rear	speaker	and	Front	speakers.
[Tes\f]
Press	A\b to	test	the	signals	of	each	speaker.	Adjust	the	volume	to	match	the	volume	of	test	signals	memorized	in	the	system.
LOCK (Parenta\f Contro\f)
Initia\f Setting of the Area Code:
When	you	use	this	unit	for	the	first	time,	you	have	to	set	the	Area	Code.
1.	 Select	the	[\bock]	menu	and	then	press	\b.
2.	 Press	\b.To	access	the	[\bock]	options,	you	must 	input	the	password	you	have	created.	Input	a	password	and	press	ENTER.	Enter	it	again	and	press	ENTER	to	verify.	If	you	make	a	mistake	before	pressing	ENTER,	press	CLEAR.
3.	 Select	the	first	character	using	WS	buttons.
4.	 Press	ENTER	and	select	the	second	character	using	WS buttons.
5.	 Press	ENTER	to	confirm	your	Area	code	selection.
DH3120S-D0_BGBRLLK_ENG_6163.indd   182012-02-13   �� 12:22:21 
						

							System Setting19
System Setting3
Rating
Blocks	playback	of	rated	DVDs	based	on	their	contents.	Not	all	discs	are	rated.
1.	 Select	[Rating]	on	the	[\bock]	menu	then	press	\b.
2.	 Input	a	password	and	press	ENTER.
3.	 Select	a	rating	from	1	to	8	using	the	WS buttons.
[Ra\fing 1-8]
Rating	one	(1)	has	the	most	restrictions	and	rating	eight	(8)	is	the	least	restrictive.
[Unlock]
If	you	select	unlock,	parental	control	is	not	active	and	the	disc	plays	in	full.
4.	 Press	ENTER	to	confirm	your	rating	selection.
Password
You	can	enter	or	change	password.
1.	 Select	[Password]	on	the	[\bock]	menu	and	then	press	\b.
2.	 Input	a	password	and	press	ENTER.
	 To	change	the	password,	press	ENTER	when	the	[Change]	option	is	highlighted.	Input	a	password	and	press	ENTER.	Enter	it	again	and	press	ENTER	to	verify.
3.	 Press	SETUP	to	exit	the	menu.
If you forge\f your passwor\b, you can clear 
i\f using \fhe following s\feps:
1.	 Press SETUP	to	display	the	Setup	menu.
2.	 Input	the	6-digit	number	“210499”	and	
press	ENTER.	 The	password	is	cleared. 
,Note
Area Code
Enter	the	code	of	the	area	whose	standards	were	used	to	rate	the	DVD	video	disc,	based	on	the	list	on	page	29.
1.	 Select	[Area	Code]	on	the	[\bock]	menu	then	press	\b.
2.	 Input	a	password	and	press	ENTER.
3.	 Select	the	first	character	using	WS	buttons.
4.	 Press	ENTER	and	select	the	second	character	using	WS	buttons.
5.	 Press	ENTER	to	confirm	your	Area	code	selection.
OTHERS
DivX(R) VOD
ABOUT	DIVX	 VIDEO:	DivX®	is	a	digital	video	format	created	by	DivX,	\b\bC,	a	subsidiary	of	Rovi	Corporation.	This	is	an	official	DivX	Certified®	device	that	plays	DivX	video.	 Visit	divx.com	for	more	information	and	software	tools	to	convert	your	files	into	DivX	videos.
ABOUT	DIVX	VIDEO-ON-DEMAND:	 This	DivX	Certified®	device 	must 	be 	registered 	in 	order 	to 	play	purchased	DivX	 Video-on-Demand	( VOD)	movies.	To	obtain	your	registration	code,	locate	the	DivX	VOD	section	in	your	device	setup	menu.	Go	to	vod.divx.com	for	more	information	on	how	to	complete	your	registration.
[Regis\fer]
Displays	the	registration	code	of	your	unit.
[Deregis\fer]
Deactivate	your 	unit 	and 	display 	the 	deactivation	code.
All	the	downloaded	videos	from	DivX	 VOD	
can	only	be	played	back	on	this	unit. 
,Note
DH3120S-D0_BGBRLLK_ENG_6163.indd   192012-02-13   �� 12:22:21 
						

							4	 Operating
Operating20
Oper\fting4
Basi\b Operations
1.	 Insert	the	disc	by	pressing	OPEN/CLOSE	or	connect	the	USB	device	to	the	USB	port.
2.	 Select	the	DVD/	CD	or	USB	function	by	pressing	FUNCTION.
3.	 Select	a	file	(or	track/	title)	you	want	to	play	by	pressing	WSA\b.
When	playing	a	disc	or	USB	Flash	Drive	
containing	with	DivX,	MP3/	WMA	and	JPEG	
files	together,	you	can	select	menu	of	files	
which	you	would	like	to	play	by	pressing	
MENU.	If		 “ This	file	has	non-supported	type	
on	the	unit” 	pops	up,	select	an	appropriate	file	
by	pressing	MENU. 
,Note
ToDo \fhis
Stop	Press	Z
PlaybackPress	d
PausePress	M
Frame-by-Frame	playbackPress	M repeatedly	to	play	title	Frame-by-Frame.
Skipping	to	the	next/previous	chapter/track/file
During	playback,	pressC	or	V	to	go	to	the	next	chapter/track	or	to	return	to	the	beginning	of	the	current	chapter/track.
Press 	C	twice 	briefly 	to 	step	back	to	the	previous	chapter/track.
\bocating	a	point	quickly	by	playing	a	file	in	fast	forward	or	fast	reverse
During	playback,	pressc	or	v	repeatedly	to	select	the	required	scan	speed.
To	return	to	normal	speed,	press	PLAY.
Playing	repeatedly	or	randomly
Press	REPEAT/RANDOM repeatedly,	and	the	current	title,	chapter	or	track	will	be	played	back	repeatedly	or	randomly.	
-	Random	play	mode	:	only	music	files.
Slowing	down	the	playing	speed
In	the	pause	mode,	press	SCAN	(c or	v)	to	select	the	required	speed.	( The	reverse	playback	is	not	supported	on	DivX	files.)
DH3120S-D0_BGBRLLK_ENG_6163.indd   202012-02-13   �� 12:22:21