LG E2242tc Owners Manual
Have a look at the manual LG E2242tc Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
www.lg.com OWNER’S MANUAL LED LCD MONITOR E1942TC E2042TC E2242TC E2442TC Ple\fse re\fd \bhis m\fnu\fl c\frefully before oper\f\bing your se\b \fnd re\b\fin i\b for fu\bure reference. LE\f LC\f MONITOR MO\fEL ENGLISH
2 ENGENGLISH TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPAR- ING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 5 - Detaching the Stand Base 6 - Mounting on a table 6 - Using the cable holder 8 - Mounting on a wall 9 USING THE MONITOR SET 9 Connecting to a PC 9 - D-SUB connection 9 - DVI-D connection 11 CUSTOMIZING SETTINGS 12 Customizing Settings 12 - Menu Settings 13 - PICTURE 14 - COLOR 15 - DISPLAY 16 - OTHERS 17 SUPER ENERGY SAVING Setting 18 PICTURE MODE Setting 19 TROUBLESHOOTING 21 SPECIFICATIONS 21 E1942TC 22 E2042TC 23 E2242TC 24 E2442TC 25 Preset Modes (Resolution) 26 Indicator 27 PROPER POSTURE 27 Proper posture for using the Monitor set.
3 ENGENGLISH ASSEMBLING AND P\fEPA\fING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. yyDo not use any unapproved accessories to ensure the safety and product life span. yyAny damages or injuries by using unapproved accessories are not covered by the warranty. yyThe accessories supplied with your product may vary depending on the model. yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. CAUTION NOTE Stand BodyStand Base CD(Owner's Manual) / CardD-SUB CableDVI-D Cable (This cable is not included in all countries.) ( Depending on the country )( Depending on the country ) Power CordAC-DC AdapterAC-DC Adapter or
4 ENGENGLISH ASSEMBLING AND P\fEPA\fING Parts and buttons Power Indicator yyLighting On: Turned on yyLighting Off: Turned off Connection panel (See p.9) Button (See p.11) (Power Button)
5 ENGENGLISH ASSEMBLING AND P\fEPA\fING Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. CAUTION 2 Stand Base Stand Body 1 2 3 yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. CAUTION Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 Stand Base Stand Base Stand Body Stand Body Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin. Pull out the Stand Base. 1 2 3
6 ENGENGLISH ASSEMBLING AND P\fEPA\fING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (Power) button on the bottom switch panel to turn the power on. \b0 cm \b0 cm \b0 cm \b0 cm Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. CAUTION Cable holder or
7 ENGENGLISH ASSEMBLING AND P\fEPA\fING Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the Monitor set and a table. The Kensington security system is optional. You can obtain it from most electronics stores. NOTE When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. WARNING Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. NOTE FrontRear
8 ENGENGLISH ASSEMBLING AND P\fEPA\fING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible. 5 Please use VESA standard as below. yy784.8 mm (30.9 inch) and under * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm yy787.4 mm (31.0 inch) and above * Please use VESA standard wall mount pad and screws. \b0 cm \b0 cm \b0 cm\b0 cmyyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. yy Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. yyUse the screws that are listed on the VESA standard screw specifications. yyThe wall mount kit will include an installation manual and necessary parts. yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer. yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length. yyFor more information, refer to the instructions supplied with the wall mount. CAUTION NOTE ModelE\b942TC E2042TC E2242TC E2442TC VESA (A x B)75 x 75100 x 100 Standard screwM4 Number of screws4
9 ENGENGLISH USING THE MONITO\f SET USING THE MONITOR SET Connecting to a PC yyYour Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. yyMac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector. yyWhen using a D-Sub signal input cable connector for Macintosh NOTE DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.
\b0 ENGENGLISH USING THE MONITO\f SET yyWhen you want to use two PC in our Monitor, please connect the signal cable(D-SUB/ DVI-D) respectively in Monitor set. yyIf you turn the Monitor set on while it is cold, the screen may flicker. This is normal. yySome red, green, or blue spots may appear on the screen. This is normal. yy"Self Image Setting" Function. This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) yy‘AUTO’ Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode) NOTENOTE yyConnect the signal input cable and tighten it by turning the screws clockwise. yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen. yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. CAUTIONSelf Image Setting Function Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode)