LG Flatron E2041s Owners Manual

							www.lg.com
OWNER’S MANUAL
LCD MONITOR 
LCD MONITOR MODEL
E1941T         
 E1941S
Please  read  this manual  caref ully  before operating  your  set  and 
retain it for future reference.
ENGLISH
E2341T
E2441T E2041T        E2041S
E2241T        
 E2241S 
 
						

							1
This unit has been engineered and manufactured to ensure your personal s\
afety,
however improper use may result in potential electrical  shock or fire h\
azards. In
order to allow the proper operation of all safeguards incorporated in th\
is display,
observe the following basic rules for its installation, use, and servici\
ng.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being
provided by the supplier. If the power cable is faulty in any way, pleas\
e contact the
manufacturer or the nearest authorized repair service provider for a rep\
lacement.
The power supply cord is used as the main disconnection device. Ensure t\
hat the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specificat\
ions of this
manual or listed on the display. If you are not sure what type of power \
supply you
have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed p\
ower
cords and broken plugs. They may result in a shock or fire hazard. Call \
your
service technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disco\
nnected from
the AC power source even if the unit is turned off.
Do not Open the Display:There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw an\
y toys
or objects on the product screen. 
It can cause injury to human, problem to product and damage the display.\
  
To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short \
period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the displays cabine\
t
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time\
, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and\
 signal
cable because it can be very dangerous. It can cause electric shock. 
Important Precautions
 
						

							2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release
of heat generated during operation. If these openings are blocked, built\
-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa\
, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is p\
rovided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this ma\
y scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may\
 cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance. \
If possible, use the recommended resolution to obtain the best image qua\
lity for
your LCD display. If used under any mode except the recommended resoluti\
on,
some scaled or processed images may appear on the screen. However, this \
is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to \
the
screen and cause image burn-in. Make sure to use a screen saver on the p\
roduct. 
Burn-in and related problems are not covered by the warranty on this pro\
duct. 
Do not shock or scratch the front and sides of the screen with metallic \
objects. 
Otherwise, it may cause damage to the screen. 
Make sure the panel faces forward and hold it with both hands to move. I\
f you 
drop the product, the damaged product can cause electric shock or fire. \
Contact 
an authorized the service center for repair. 
Avoid high temperatures and humidity. 
 
						

							Important Precautions
3
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on\
 the displayscreen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a\
 soft cloth to prevent scratching. Do not clean with a wet cloth or spray wate\
r or other
liquids directly onto the product. An electric shock may occur. (Do not\
 use
chemicals such as benzene, paint thinners or alcohol) 
Spray water onto a soft cloth 2 to 4 times, and use it to clean the fron\
t frame; wipe in one direction only. Too much moisture may cause staining.  
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to anot\
her
location, repack it in its original material.
On Disposal 
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regula\
tions of
your local authority.
 
						

							4
Accessories
!!! Thank for selecting LGE products !!! 
Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.
Users Guide/CardsPower Cord
15-pin D-Sub Signal Cable
(To set it up, this signal cable may be attached to  this product before shipping out.)DVI-D Signal Cable
(This feature is not available in all countries.)
(Only E1941T/E2041T/E2241T/
    E2341T/E2441T
)
NOTE
This accessories may look different from those shown here.User must use shielded signal interface cables (D-sub 15 pin cable, DVI\
-D cable) with ferrite
cores to maintain standard compliance for the product.
 
						

							Connecting the Display
5
Before setting up  the monit or, ensure that the pow er to the moni tor, the computer
syste m, and other attache d devices is turned off.
Connecting the st and 
1.Place  the  monit or with i ts front facing  downwardon a soft cloth.
2. Assemble the stand Body into  the
product in the correct direction a s shown in
t he  picture.  Make sure you  push it until you
hear i t “click”.3.Assemble the Stand Base(Front,
Rear) into the Stand Body in the
correct direction.
4.Use a coin on the back of the stand base and turn the screw clockwise to\
tighten.
5.Once assembled take the monitor up carefully and face the front side.
Im portant
T his illust ration  depicts  the general  model of connection. Your  monitor may  differ from
t he it ems shown  in the picture.
Do  not carry the  product upside  down holding  only the st and base. The  product may
f all  and  get damaged  or injure your foot.
Stand Body Hin
ge Body
St and  Body
Stand  Base
 
						

							6
Connecting the Display
Disassembling the  stand
1.Put a cushion  or soft cloth  on aflat
s urface.
3.                                                        4. Remove  the Stand Body  and Stand
Base from product in correct 
direction as shown in the picture.
2.P lace the  monitor face  Down on the
c ushion  or soft cloth.
Use a coin on the back of the Stand
Base and turn the screw  anticlock-
wise to loosen.
 
						

							7
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off. 
Positioning your display
-After installation, adjust the angle as shown below. 
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range :  -5˚ to 15˚
ERGONOMIC
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
Do not touch or press the screen when
adjusting the angle of the monitor. 
When adjusting the angle of the screen, do
not put your finger(s) in between the head of
the monitor and the stand body. You can
hurt your finger(s).
 
						

							8Connecting the DisplayE1941T/E2041T/E2241T/E2341T/E2441TNOTE‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution. ABConnect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable 1.Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.  2.Connect signal input cable         and power cord        in order, then tighten the screw
of the signal cable. Connecting with the PC 12PC
PCABWall-outlet typeMac adapter :For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin  2
row connector.When using a D-Sub signal input cable connector
for Macintosh Varies according to model.NOTE  This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.3.Press the power button on the front panel to turn the power on. When monitor power is
turned on, the Self Image Setting Functionis executed automatically.
(Only Analog Mode)Power ButtonConnect the signal 
input cable and tighten
it up by turning in the 
direction of the arrow 
as shown in the figure. 
						

							 9 
Connecting the DisplayE1941S/E2041S/E2241S
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this fun\
ction automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO’ Function?  When you encounter problems such as blurry screen, blurred letters, scre\
en
flicker or tilted screen while using the device or after changing screen\
 resolution, press the
AUTO function button to improve resolution. 
AConnect D-sub(Analog signal) Cable 
1.Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off.  
2.Connect signal input cable         and power cord        in order, then \
tighten the screw
of the signal cable. 
Connecting with the PC 
12
PCA
Wall-outlet type
Mac adapter : For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin  2
row connector.
When using a D-Sub signal input cable connector for
Macintosh 
Vari es acc ording t o model.
3.Press the power button on the front panel to turn the power on. When mon\
itor power is
turned on, the  Self Image Setting Function is executed automatically.
Power Button
NOTE  This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from \
the view as shown.
Connect the signal 
input cable and tighten
it up by turning in the 
direction of the arrow 
as shown in the figure.