Home > LG > Monitor > LG Flatron E2050s Users Guide

LG Flatron E2050s Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual LG Flatron E2050s Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Make sure to read the Important Precautionsbefore using the
    product. Keep the Users Guide(CD) in an accessible place for future
    reference.
    See the label attached on the product and give the information to
    your dealer when you ask for service.
    E1950T
    E2050T
    E2250T
    E2350T
    User’s Guide
     
    						
    							1
    This unit has been engineered and manufactured to ensure your personal safety,
    however improper use may result in potential electrical  shock or fire hazards. In
    order to allow the proper operation of all safeguards incorporated in this display,
    observe the following basic rules for its installation, use, and servicing.
    On Safety
    Use only the power cord supplied with the unit. In case you use another power
    cord, make sure that it is certified by the applicable national standards if not being
    provided by the supplier. If the power cable is faulty in any way, please contact the
    manufacturer or the nearest authorized repair service provider for a replacement.
    The power supply cord is used as the main disconnection device. Ensure that the
    socket-outlet is easily accessible after installation.
    Operate the display only from a power source indicated in the specifications of this
    manual or listed on the display. If you are not sure what type of power supply you
    have in your home, consult with your dealer.
    Overloaded AC outlets and extension cords are dangerous. So are frayed power
    cords and broken plugs. They may result in a shock or fire hazard. Call your
    service technician for replacement.
    As long as this unit is connected to the AC wall outlet, it is not disconnected from
    the AC power source even if the unit is turned off.
    Do not Open the Display:
    There are no user serviceable components inside. 
    There are Dangerous High Voltages inside, even when the power is OFF. 
    Contact your dealer if the display is not operating properly.
    To Avoid Personal Injury :
    Do not place the display on a sloping shelf unless properly secured.
    Use only a stand recommended by the manufacturer.
    Do not drop an object on or apply impact to the product. Do not throw any toys
    or objects on the product screen. 
    It can cause injury to human, problem to product and damage the display.  
    To Prevent Fire or Hazards:
    Always turn the display OFF if you leave the room for more than a short period
    of time. Never leave the display ON when leaving the house.
    Keep children from dropping or pushing objects into the displays cabinet
    openings. Some internal parts carry hazardous voltages.
    Do not add accessories that have not been designed for this display.
    When the display is to be left unattended for an extended period of time, unplug
    it from the wall outlet.
    In the presence of thunder and lightning, never touch the power cord and signal
    cable because it can be very dangerous. It can cause electric shock. 
    Important Precautions
     
    						
    							2
    Important Precautions
    On Installation
    Do not allow anything to rest upon or roll over the power cord, and do not place the
    display where the power cord is subject to damage.
    Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
    laundry tub, in a wet basement, or near a swimming pool.
    Displays are provided with ventilation openings in the cabinet to allow the release
    of heat generated during operation. If these openings are blocked, built-up heat
    can cause failures which may result in a fire hazard. Therefore, NEVER:
    Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
    Place the display in a built-in enclosure unless proper ventilation is provided.
    Cover the openings with cloth or other material.
    Place the display near or over a radiator or heat source.
    Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
    mar, or damage the Active Matrix LCD permanently.
    Do not press the LCD screen with your finger for a long time as this may cause
    some afterimages.
    Some dot defects may appear as Red, Green or Blue spots on the screen.
    However, this will have no impact or effect on the display performance. 
    If possible, use the recommended resolution to obtain the best image quality for
    your LCD display. If used under any mode except the recommended resolution,
    some scaled or processed images may appear on the screen. However, this is
    characteristic of the fixed-resolution LCD panel.
    Leaving a fixed image on the screen for a long time may cause damage to the
    screen and cause image burn-in. Make sure to use a screen saver on the product. 
    Burn-in and related problems are not covered by the warranty on this product. 
    Do not shock or scratch the front and sides of the screen with metallic objects. 
    Otherwise, it may cause damage to the screen. 
    Make sure the panel faces forward and hold it with both hands to move. If you 
    drop the product, the damaged product can cause electric shock or fire. Contact 
    an authorized the service center for repair. 
    Avoid high temperatures and humidity. 
     
    						
    							Important Precautions
    3
    On Cleaning
    Unplug the display before cleaning the face of the display screen.
    Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
    screen because over-spraying may cause electrical shock.
    When cleaning the product, unplug the power cord and scrub gently with a soft
    cloth to prevent scratching. Do not clean with a wet cloth or spray water or other
    liquids directly onto the product. An electric shock may occur. (Do not use
    chemicals such as benzene, paint thinners or alcohol) 
    Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
    wipe in one direction only. Too much moisture may cause staining.  
    On Repacking
    Do not throw away the carton and packing materials. They make an ideal
    container in which to transport the unit. When shipping the unit to another
    location, repack it in its original material.
    On Disposal 
    The fluorescent lamp used in this product contains a small amount of mercury.
    Do not dispose of this product with general household waste.
    Disposal of this product must be carried out in accordance to the regulations of
    your local authority.
     
    						
    							4
    Accessories
    !!! Thank for selecting LGE products !!! 
    Please make sure the following items are included with your
    monitor. If any items are missing, contact your dealer.
    DVI-D Signal Cable
    (This feature is not available in
    all countries.)
    NOTEThis accessories may look different from those shown here.User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
    cores to maintain standard compliance for the product.
    Users Guide/Cards
    Power Cord            AC-DC adapter
    (Depending on the  country)AC-DC adapter(Depending on the  country) 15-pin D-Sub Signal Cable
    (To set it up, this signal cable may
    be attached to  this product before
    shipping out.)
    Or
     
    						
    							Connecting the Display
    5
    Before setting up the monitor, ensure that the power to the monitor, the computer
    system, and other attached devices is turned off.
    1 way stand  
    1.Place the monitor with its front facing downward on a soft cloth.
    2. Use a coin on the back of the stand base and turn the screw clockwise to tighten.
    3.Once assembled take the monitor up carefully and face the front side.
    4.When you desire to disintegrate the monitor from the stand base, use a coin to turn the
    screw counterclockwise.
    Important
    This illustration depicts the general model of connection. Your monitor may differ from
    the items shown in the picture.
    Do not carry the product upside down holding only the stand base. The product may
    fall and get damaged or injure your foot.
     
    						
    							Press
    6
    Connecting the Display
    2. Press the button as shown, and pull the stand body up.
    3. After pull the stand body up,take the monitor up carefully and face the front side.
    (Once you pull the stand body up, please keep pressing the button.If you don’t 
    press the button, it will damage the product.)
    When limited tilt degree, the button
    is not working, pull stand body up or
    down a little.
    Before setting up the monitor, ensure that the power to the monitor, the computer
    system, and other attached devices is turned off.
    2 way stand   
    1.Place the monitor with its front facing downward on a soft cloth.
     
    						
    							7
    Connecting the Display
    4.If you want to use the stand base,pull the stand body down.
    (Once you pull the stand body down, please keep pressing the button.If you don’t 
    press the button, it will damage the product.)
    5.Use a coin on the back of the stand base and turn the screw clockwise to tighten.
    6.Once assembled take the monitor up carefully and face the front side.
    Important
    This illustration depicts the general model of connection. Your monitor may differ from
    the items shown in the picture.
    Do not carry the product upside down holding only the stand base. The product may
    fall and get damaged or injure your foot.
     
    						
    							8
    Connecting the Display
    Before setting up the monitor, ensure that the power to the monitor,
    the computer system, and other attached devices is turned off. 
    Positioning your display
    After installation, adjust the angle as shown below. 
    * With stand base 
    Adjust the position of the panel in various ways for maximum comfort.
    Tilt Range : -5˚ - 15˚                            
    ERGONOMIC
    It is recommended that in order to maintain an ergonomic and comfortable viewing position,
    the forward tilt angle of the monitor should not exceed 5 degrees.
    Do not touch or press the screen when
    adjusting the angle of the monitor. 
    When adjusting the angle of the screen, do
    not put your finger(s) in between the head of
    the monitor and the stand body. You can
    hurt your finger(s).
     
    						
    							Connecting the Display
    9
    Before setting up the monitor, ensure that the power to the monitor,
    the computer system, and other attached devices is turned off. 
    Positioning your display
    * Without stand base 
    Ergonomic
    It is recommended that in order to maintain an ergonomic and comfortable viewing position, the
    backward tilt angle of the monitor should exceed 10 degrees.
     
    						
    All LG manuals Comments (0)

    Related Manuals for LG Flatron E2050s Users Guide