LG Flatron M2380d Owners Manual

							21
EXTERNAL  EQUIPMENT  SETUP
Connecting a set-top box with a HDMI cable
Connect  the  digital  set-top  box  to HDMI/DVI  IN  1  or 
HDMI/DVI IN 2  jack on the SET
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select  HDMI  1   or HDMI  2   input  source  using  the 
INPUT  button on the remote control.1
2
3
NOTE
 ► Check  that  your  HDMI  cable  is  High  Speed  HDMI  Cable.  If  the  HDMI  cables  are  not  High  Speed 
HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
!
1
   
						

							22
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
Connect the digital set-top box to HDMI/DVI IN 1 or HDMI/DVI IN 2  jack on the SET.
Connect the audio output of the digital set-top box to the  AUDIO IN (RGB/DVI) jack on the SET.
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select  HDMI 1  or HDMI 2  input source using the  INPUT button on the remote control.
Connecting with an HDMI to DVI cable
1
2
3
4
1
2
 
						

							23
EXTERNAL  EQUIPMENT  SETUP
DVD SETUP
Connecting with a component cable
Connect  the  video  outputs  (Y,  PB,  PR)  of  the  DVD 
to the COMPONENT IN VIDEO  jacks on the SET.
Connect  the  audio  outputs  of  the  DVD  to  the 
COMPONENT IN AUDIO jacks on the SET.
Turn on the DVD player, insert a DVD.
Select  Component  input  source  using  the  INPUT 
button on the remote control.
Refer  to  the  DVD  player's  manual  for  operating 
instructions.1
2
3
4
5
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the SET YPBPR
Video output ports
on DVD player Y
P
BPR
YB-Y R-Y
Y Cb Cr
Y Pb Pr
12
   
						

							24
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
1OPTICALDIGITAL
AUDIO OUT
ANTENNA / CABLE IN
USB IN
VIDEO
VIDEO
YP
BPRLR AUDIO
(MONO)  L  -  AUDIO  -  R
AUDIO
IN
(RGB/DVI)H / P
AV IN2
(R) AUDIO (L )
AUDIO/
VIDEO
Connecting with a Euro Scart cable
Connect the Euro scart socket of the DVD to the  AV1 
Euro scart socket on the SET.
Turn on the DVD player, insert a DVD.
Select  AV1  input  source  using  the  INPUT button  on 
the remote control.
Refer  to  the  DVD  player's  manual  for  operating 
instructions.1
2
3
4
NOTE
 ► Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the 
AV  1  can  be  received.  These  signals  are  transmitted,  for  example,  by  a  paid  TV  decoder,  game 
machine or photo CD unit, etc.
 ►Please use shielded scart cable.
 ► TV  Out  :  Outputs  Analogue 
TV or  Digital TV  signals.
!
1
Scart Input
Output
Video Audio RGB Video, Audio
AV1 OOO Analogue TV, Digital TV
Output Type
Current input mode AV1
(TV Out) AV1
(When DTV scheduled recoring is in  
progress using recording equipment)
Digital TV Digital TV O
Analogue TV, AV Analogue TV
O
(The input mode is converted  to DTV)
Component / RGB
Analogue TV
HDMI X
 
						

							25
EXTERNAL  EQUIPMENT  SETUP
Connecting the HDMI cable
Connect the HDMI output of the DVD to the HDMI/DVI 
IN 1  or HDMI/DVI IN 2  jack on the SET
Select  HDMI 1  or HDMI 2  input source
using the  INPUT button on the remote control.
Refer  to  the  DVD  player's  manual  for  operating 
instructions.1
2
3
NOTE
 ► Check  that  your  HDMI  cable  is  High  Speed  HDMI  Cable.  If  the  HDMI  cables  are  not  High  Speed 
HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
!
1
   
						

							26
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
VCR SETUP
Connecting with a RF cable
 ■To avoid picture noise (interference), allow adequate distance between the VCR and  SET.
Connect the  ANT OUT socket of the VCR to the  ANTENNA / CABLE IN socket on the SET.
Connect the antenna cable to the  ANT IN socket of the VCR.
Press the  PLAY button on the  VCR and match the appropriate channel between the SET and VCR 
for viewing.
1
1
2
2
3
Wall Jack
Antenna
 
						

							27
EXTERNAL  EQUIPMENT  SETUP
Connecting with a Euro Scart cable
Connect the Euro scart socket of the VCR to the AV1
Euro scart socket on the SET.
Insert  a  video  tape  into  the  VCR  and  press  PLAY  on 
the VCR. (Refer to the VCR owner’s manual.)
Select AV1  input  source  using  the  INPUT button  on 
the remote control.
Refer  to  the  VCR  player's  manual  for  operating 
instructions.1
2
3
4
NOTE
 ► Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the 
AV  1  can  be  received.  These  signals  are  transmitted,  for  example,  by  a  paid  TV  decoder,  game 
machine or photo CD unit, etc.
 ►Please use shielded scart cable.
!
1OPTICAL
DIGITAL
AUDIO OUT
ANTENNA / CABLE IN
USB IN
VIDEO
VIDEO
YP
BPRLR AUDIO
(MONO)  L  -  AUDIO  -  R
AUDIO
IN
(RGB/DVI)H / P
AV IN2
(R) AUDIO (L )
AUDIO/
VIDEO
1
 ► TV Out : Outputs Analogue TV 
or Digital TV  signals.
Scart Input
Output
Video Audio RGB Video, Audio
AV1 OOO Analogue TV, Digital TV
Output Type
Current input mode AV1
(TV Out) AV1
(When DTV scheduled recoring is in  
progress using recording equipment)
Digital TV Digital TV O
Analogue TV, AV Analogue TV
O
(The input mode is converted  to DTV)
Component / RGB
Analogue TV
HDMI X
   
						

							28
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
1
OPTICALDIGITAL
AUDIO OUT
USB IN VIDEO
YP
BPRLR AUDIO
AUDIO
IN
(RGB/DVI)H / P
COMPONENT IN
VIDEO(MONO)  L  -  AUDIO  -  R
AV IN2
LRS-VIDEOVIDEO
OUTPUT
SWITCH ANT IN
ANT OUT
Connecting with a RCA cable
Connect  the  AUDIO/VIDEO   jacks  between  SET  and 
VCR.  Match  the  jack  colours  (Video  =  yellow,  Audio 
Left = white, and Audio Right = red)
Insert a video tape into the  VCR and press  PLAY on 
the VCR. (Refer to the VCR owner’s manual.)
Select  AV2 input source using the  INPUT button on
the remote control.1
2
3
1
NOTE
 ► If you have a mono VCR, connect the audio cable from the  VCR to the  AUDIO L / MONO jack of 
the SET.
!
 
						

							29
EXTERNAL  EQUIPMENT  SETUP
INSERTION OF CI MODULE
Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association)  
CARD SLOT  of SET as shown.
For further information, see p.611
NOTE
 ► Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is 
not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
!
 -To view the encrypted (pay) services in digital TV mode.
 -This feature is not avai lable in al l countries.
   
						

							30
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
DIGITAL AUDIO OUT SETUP
Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.
Set the “TV Speaker option - Off ”  in the AUDIO menu. (► P. 92) 
Refer to the external audio equipment instruction manual for operation.1
2
3
CAUTION
 ► Do not look into the optical output port. Looking at the laser beam may damage your vision.
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT 
terminal on the back of  TV to a Home Theater (or amp).
1
2