LG Flatron W2271tc Users Guide

							Make sure to read the Important Precautionsbefore using the product. 
Keep the Users Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
W1971SC
W2271SC
W2271TC
User’s Guide
 
						

							1
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical  shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display:
There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen. 
It can cause injury to human, problem to product and damage the display.  
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the displays cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock. 
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Important Precautions
 
						

							2
Important Precautions
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance. 
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product. 
Burn-in and related problems are not covered by the warranty on this product. 
Do not shock or scratch the front and sides of the screen with metallic objects. 
Otherwise, it may cause damage to the screen. 
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
 
						

							3
Connecting the Display
IMPORTANT
This illustration depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and get
damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand 
1.Place the monitor face down on the cushion or soft cloth.
2.Assemble the Stand Body into the product in the correct direction as shown in the picture. 
3.Check the direction of the Stand Base and assemble it into the Stand Body. 
5.Once assembled take the monitor up carefully and face the front side.
4.Insert the Cable Deco Cover in the Stand Body in the correct direction.
Stand Body Stand BaseStand Body
Hinge Body
Stand BaseCable Deco CoverCable Deco Cover
 
						

							4
Connecting the Display
1.  Place the monitor face down on the cushion or soft cloth.
3.Press the hook, take off the stand base from stand body.
4.Please pull the stand body lightly to separate it from the hinge body. 
2.Slide the Cable Deco Cover out from the stand body.
Hook
Disassembling the stand
 
						

							5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~22˚                   
22
-5  
ERGONOMIC
It is recommended that in order to maintain an ergonomic and comfortable 
viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.
 
						

							6
Connecting the DisplayW2271TC
A
B
C
Connect DVI(Digital signal) Cable
Connect D-sub(Analog signal) Cable (PC)
Connect D-sub(Analog signal) Cable (Mac)
Using the Computer
1.Make sure to turn off the computer and  product. Connect signal input cable      and power cord      in order, then tighten the
screw of the signal cable. 12
DE
Wall-outlet type
MAC
Power Cord12
Mac adapterFor Apple Macintosh use, a
separate plug adapter is needed
to change the 15 pin high density
(3 row) D-sub VGA connector on
the supplied cable to a 15 pin  2
row connector.PC
PC
Signal Cable
DVI (This feature is not 
available in all countries.) Headphone/Earphone Output
Varies according to model.
3.Press the power button on the front panel to turn the power
on. When monitor power is turned on, the Self Image
Setting Functionis executed automatically.
(Only Analog Mode)
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the
monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. 
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen
while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 
2.Insert the Cable Deco Cover in the Stand Body in the correct direction.
Power Button
NOTE  This is a simplified representation of the rear view.
This rear view represents a general model; your display may
differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable,
DVI cable) with ferrite cores to maintain standard compliance for the
product.
 
						

							Connecting the DisplayW1971SC/W2271SC
7
A
B
Connect D-sub(Analog signal) Cable (PC)
Connect D-sub(Analog signal) Cable (MAC)
Using the Computer
1.Make sure to turn off the computer and  product. 
Connect signal input cable      and power cord      in order, then tighten the
screw of the signal cable. 12
NOTE  This is a simplified representation of the rear view.
This rear view represents a general model; your display may
differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable,
DVI cable) with ferrite cores to maintain standard compliance for the
product.
Varies according to model.
3.Press the power button on the front panel to turn the power
on. When monitor power is turned on, the Self Image
Setting Functionis executed automatically.
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the
monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. 
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen
while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 
2.Insert the Cable Deco Cover in the Stand Body in the correct direction.
Power Button
DEWall-outlet type
MAC
Power Cord12
PC
Signal Cable
Headphone/Earphone Output
Mac adapterFor Apple Macintosh use, a
separate plug adapter is needed
to change the 15 pin high density
(3 row) D-sub VGA connector on
the supplied cable to a 15 pin  2
row connector.
 
						

							8
Using Webcam Function
Connecting the USB(Universal Serial Bus) Cable 
NOTEFor more information on USB, visit the following web site.(http://www.usb.org)
With the USB cable unconnected, you will not have any trouble using the PC. 
D
E
1.You can use the monitor’s webcam function by connecting the monitor and the PC with
USB cable. 
Connect USB cable  
USB Upstream port (1 unit): Connect it with the
downstream port of the PC or laptop. 
(Your computer must support USB.) 
Connect audio cable 
1.To use the webcam function, connect the USB cable and install the programs on
the webcam software CD. 
2.The webcam software CD contains two programs. 
Install the LG Webcam Viewer program first, and then the LG Webcam Driver files. 
3.For more information about the programs, refer to the user guide in the webcam
software CD. 
Minimum system requirements
· Intel Pentium 4 1.6 GHz or AMD®equivalent processor 
(Intel®Pentium®D processor running at 3.0 GHz or better 
recommended) 
· Microsoft®Windows®XP Service Pack 2 (32/64-bit),  
Vista (32/64-bit) 
· 
256MB RAM or higher (512MB RAM recommended) 
· 500MB HDD  
· CD-ROM 
· USB 2.0 interface
· Window Vista Premium / XP SP2 with UVC patch 
Please update UVC patchfrom http://www.microsoft.combefore use.  
Webcam 
Microphones 
To use the webcam function, your PC should meet the following minimum system requirements. 
Using the Webcam function
D
E

Control Panel Functions
Use this button to turn the display on or off.
This Indicator lights up blue when the display operates
normally(On Mode). If the display is in Sleep Mode
(Energy Saving), this indicator color changes 
to amber.Power Button/
Power Indicator
Use this button to enter a selection in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SETbutton before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
1680 x 1050
ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
For more information,
refer to page 21.
Use this button to make either D-Sub or DVI connector
active. This feature is used when two computers are
connected to the display. The default setting is D-Sub.
\(Only W2271TC \)
\(SOURCE Hot key\)
Use the           buttons to adjust the speaker volume. 
   
Use this button to mute or adjust the sound volume. VOLUME
Button

Control Panel Functions
Use this button to enter a selection in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SETbutton before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
1440 x 900
ButtonsUse these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page 21.
Use this button to turn the display on or off.
This Indicator lights up blue when the display operates
normally(On Mode). If the display is in Sleep Mode
(Energy Saving), this indicator color changes 
to amber.Power Button/
Power Indicator

On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Sub-menus
NOTE
OSD \(On Screen Display\) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Main Menu
Button Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
 
						

							9
Control Panel Functions
Front Panel Controls
Use this button to enter EZ ZOOMING, 4:3 IN WIDE,
PHOTO EFFECTitems.
For more information, refer to page 17.
MENU ButtonUse this button to enter or exit from the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so
that these settings are not inadvertently changed. To lock the
OSD settings, press and hold the MENU buttonfor several
seconds. The message OSD LOCKED appears.
You can unlock the OSD settings at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKED appears.
Button
12 5346  
W2271SC
12 5346  
W2271TC

On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Scr
A short example is given below to familiarize you with the use of the contr
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Buttonthen the main menu of the OSD appears.
To access a control, use the        oButtonsWhen the icon you want
becomes highlighted, press the  AUTO/SET Button
Use Buttonsadjust the image to the desired level. Use the
AUTO/SET Button select other sub-menu items.
Press the MENU Buttononce to return to the main menu to select another
function. Press the MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.

On Screen Display(OSD) Selection and Adjustment 
The OSD screen will appear when you press the  button on the front
of the monitor.
Main menu Description
EZ ZOOMINGTo select the display resolution. 
When you select EZ ZOOMING in OSD, display
resolution goes one step down so characters and
images look bigger. When you select EZ
ZOOMING once again, it goes back to the
original resolution.   
* This function is operated only if the forteManag-
er is installed to PC.
MENU: Exit
,     : Move
SET    : Select
4:3 IN WIDETo select the image size of the screen.