LG Flatron W2486l Owners Manual

							20
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
D-SUB/DVI-D input
HDMI input
DEMO
SPORTSThis is used for advertising in the store. The screen
will be divided to show the standard mode on the
left and video mode on the right so that the
consumers can check the difference after applying
the video mode. 
Select this when you watching general sports.
D-SUB/DVI-D input
HDMI input
USER
• HUE : Adjust the screen hue.
• SATURATION: Adjusts the intensity of colors. Higher
intensity makes colors darker while
lower intensity makes colors lighter.
This allows users to adjust ACE, RCM(Only for
D-SUB/DVI-D input), HUEor SATURATION
(Only for HDMI input). 
You can save or restore the adjusted value even
when using a different environment. 
MENU: Exit
: Decrease
: Increase
AUTO/SET: Select another sub-menu
To adjust the USER sub-menu function,
press the AUTO/SETButton.
• ACE (Adaptive Clarity Enhancer): Selects the clarity mode.
Not applied
Weak clarity and luminosity contrast. 
Strong clarity and luminosity contrast. 
Not applied
Green enhance 
Flesh tone
Color Enhance
• RCM (Real Color Management): Selects the color mode.
 
						

							21
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
Press the MENUButton, then the
main menu of the OSD appears.
Main Menu
 
						

							22
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PICTURE
BRIGHTNESS
CONTRAST 
GAMMA
BLACK LEVELTo adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. 
: -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
You can set the offset level. If you select
HIGH, the screen will be bright and if
you select ‘LOW’, the screen will be dark. 
(only for HDMI input)
* Offset?As the criteria for video signal, it is the
darkest screen the monitor can show.
PRESET
RED
GREEN
BLUESelect the screen color. 
• sRGB: Set the screen color to fit
the sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
D-SUB/DVI-D input
HDMI input
MENU: Exit
: Decrease
: Increase
SET    : Select another
sub-menu
MENU: Exit
: Decrease
: Increase
SET    : Select another
sub-menu
 
						

							23
On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET    : Select another
sub-menu
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen. HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
 
						

							24
On Screen Display(OSD) Selection and Adjustment 
Press the      ,      buttons to reset immediately.
SETUP
MENU: Exit
: Adjust
: Adjust
SET    : Select another  
sub-menu
Main menu Sub menu Description
To choose the language in which the control
names are displayed.
To adjust position of the OSD window on the
screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
If the output of the video card is different the
required specifications, the color level may
deteriorate due to video signal distortion. Using
this function, the signal level is adjusted to fit into
the standard output level of the video card in
order to provide the optimal image.
Activate this function when white and black colors
are present in the screen. (Only for D-SUB input)   
Restore all factory default settings except
LANGUAGE. 
FACTORY
RESET POWER
INDICATOR
Use this function to set the power indicator on the
front side of the monitor to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power indicator will
automatically be turned on.
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the  
white balance function again. This function will be enabled only when the input is a D-SUB input. 
R T CIf you set ON, you enable the Response Time
Control function and reduce the afterimage of the
screen.
If you set OFF, you disenable the Response
Time Control function and operate at panel
response time. (Only W2286L)
D-SUB input
HDMI input
OVERSCANIt is the function to filter out the noise which may
be generated around the edge of the image when
connecting the HDMI and the external device.
When it is set to ON, the original image is
enlarged with no noise.
When it is set to OFF, the original size is displayed
as it is regardless the noise. (Only for HDMI input)
 
						

							25
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator red?
Is the power indicator
blinking?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try
moving the mouse or pressing any key on the
keyboard to bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try
again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							26
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select the
recommend resolution. 
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer. 
 
						

							27
Troubleshooting
Do you see an Unrecognized monitor, Plug&Play (VESA DDC)
monitor found message?
Have you installed the
display driver?• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
Display image is incorrect
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
The Audio function is not working
Picture OK & No sound.• Check whether volume is 0.
• Check sound muted.
• HDMI cable installed properly.
• Head phone cable installed properly.
• Check sound format. Not supply to compressed
sound format.
 
						

							28
Specifications  W2286L
55.8673 cm (21.995 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 
55.8673cm
0.282 mm x 0.282 mm (Pixel Pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green), DigitalSync Input
Signal Input 15 pin D-Sub Connector (Analog)
DVI-D Connector (Digital)
HDMI Connector (Digital)
Input Form RGB Analog (0.7 Vp-p / 75 ohm), Digital, HDMIVideo Input
Max VESA 1680 x 1050 @ 60 Hz
Recommend VESA 1680 x 1050 @ 60 HzResolution
Plug&Play
On Mode : 27 W (Typ.)
Sleep Mode≤1 W
Off Mode≤1 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironmental
Conditions
With Stand
Width     51.97  cm  (20.46  inch)
Height 4 3 . 7 3  c m  (17.22 inch)
Depth19.84 cm (7.81 inch)
Weight(excl. packing) 4.1 kg (9.04 lb)Dimensions
& Weight
Tilt : -2˚ to 15˚Range
12 V       2.0 APower Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B
Without Stand
Width     51.97  cm  (20.46  inch)
Height42.57 cm (16.76 inch)
Depth8.46 cm (3.33 inch)
NOTE
Information in this document is subject to change without notice.
Lien Chang, LCAP07FAC-DC Adapter
 
						

							Specifications  W2486L 
29
60.97 cm (24 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 
60.97cm
0.2767 mm x 0.2767 mm (Pixel Pitch)
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green), DigitalSync Input
Signal Input 15 pin D-Sub Connector (Analog)
DVI-D Connector (Digital)
HDMI Connector (Digital)
Input Form RGB Analog (0.7 Vp-p / 75 ohm), Digital, HDMIVideo Input
Max VESA 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 HzResolution
Plug&Play
On Mode : 28 W (Typ.)
Sleep Mode≤1 W
Off Mode≤1 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironmental
Conditions
With Stand
Width     57.74  cm  (22.73  inch)
Height44.05 cm (17.34 inch)
Depth 1 9 . 8 4  c m  (7.81 inch)
Weight(excl. packing) 4.7 kg (10.36 lb)Dimensions
& Weight
Tilt : -2˚ to 15˚Range
12 V       2.1 APower Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B
Without Stand
Width     57.74  cm  (22.73  inch)
Height 4 3 . 0 0  c m  (16.93 inch)
Depth 8 . 4 1  c m  (3.31 inch)
NOTE
Information in this document is subject to change without notice.
Lien Chang, LCAP07FAC-DC Adapter