LG Hb 976tzw Owners Manual

Getting Started11
Getting Started1
 yThe file name is limited to 180 characters. 
 yMaximum files/folder: L

ess than 2 000  
(total number of files and folders)
 y Depending on the size and number of the 
files, it ma

y take several minutes to read the 
contents on the media. 
 y File compatibility may diff

er depending on 
the server. 
 y Because the compatibility on DLNA serv

er 
are tested on the bundle DLNA server (Nero 
MediaHome 4 Essentials) environment, file 
requirements and playback...

Getting Started
12
Getting Started1
Certain System Requirements
For high definition video playback:
 y High definition display that has HDMI input jacks.
 yBD-ROM disc with high definition content.
 yHDMI or HDCP capable DVI input on your display 
device is required for some content (as specified 
by disc authors).
For playing files on your PC’s share folder via your 
home network, the PC requires below.
 y Windows® XP (Service Pack 2 or higher), 
Windows Vista® (no Service Pack required) 
Windows 7® (no...

Getting Started13
Getting Started1
Battery Installation
Remove the battery cover on the rear of the Remote Control, and 
insert two R03 (size AAA) batteries 
with 
4 and 
5 matched correctly. •  •  •  •  •  •  
a
 •  •  •  •  •  •
1 (POWER): Switches the player 
ON or OFF.
B  (OPEN/CLOSE): Opens and 
closes the front door.
RADIO&INPUT: Changes input 
mode.
0-9 numerical buttons: Selects 
numbered options in a menu or 
inputs letters in the keypad menu.
CLEAR: Removes a mark on the 
search menu or a...

Getting Started
14
Getting Started1
Player (Front)
a 1 /
!  (POWER) Button
b
 Display Window 
c
 Operation buttons 
T  (PLAY / PAUSE) 
I  (STOP) 
SW  (Volume control)
F (Function) 
Changes the input source or function. 
R  (OPEN/CLOSE)
d
 Front Door 
After several minutes with the front door 
opened, the front door closes  automatically.
e
 Disc Loader
f
 R  Close Button
 yBe careful not to pinch your finger or any 
object in it when closing the front door
.
 yDo not raise the front door with hands 
when...

Getting Started15
Getting Started1
Player (Rear)
LAN
HDMI OUT
OPTICAL IN
COMPOSITE
HDMI IN 1 HDMI IN 2
a COMPOSITE
b
 OPTICAL IN
c
 HDMI IN 1 
d
 HDMI IN 2 
e
 HDMI OUT f
 LAN port
g
 iPod (24 pin)
Connect to the furnished iPod cradle.
h
 PORT. IN
i
 USB Port
j
 Remote sensor
 

Getting Started
16
Getting Started1
Active woofer
a  Speaker duct
Be careful to make sure children not to put 
their hands or any objects into the speaker 
duct. >Caution
b LED (connection status)
BLUE: The connection is completed.
   BLUE(blink): The woofer is trying to connect. RED: The connection is in standby mode or 
failed. c
 Cooling Fan
d
 Speakers connectors
e
 PAIRING button
f
 Antenna Connector
 

2 Connecting
Connecting 17
Connecting2
Installing the player
You can stand the player or mount on a wall.
Assembling the player with 
stand
Preparation
1. Connect the cables.
Step 1
2. Assemble the rear cover as shown below.
Step 2
3. Attach the stand to the player. Then secure the 
connection with the supplied screws.
Step 3
4. Arrange the cable with cable holder as shown 
below.
Step 4
 

Connecting
18
Connecting2
Mounting the player on a wall
You can mount the player on a wall.  
Prepare screws, bracket and guide sheet (the rear 
page of install guide) supplied.
Preparation
1. You should drill some holes. A guide sheet is 
supplied to drill. Use the sheet to check the 
point to drill.
Step 1
13 cm
Rear page of the 
installation gu ide
2. When you mount on a wall(concrete), use the 
wall plugs and screws (Not supplied). Attach 
the wall bracket on the wall as shown in the 
illustration...

Connecting19
Connecting2
3. Connect the cables.
Step 3
4. Assemble the rear cover as shown below. If you 
need, arrange the cable by  attaching  the cable 
holder to the rear panel as shown below.
Step 4
5. Assemble the hand screws.
Step 5
6. Hang the player onto the bracket as shown 
below.
Step 6
 yDo not hang onto the installed unit and 
avoid an
y impact to the unit.
 ySecure the unit firmly t

o the wall so that it 
does not fall off. If the unit falls off, it may 
result in an injury or damage to...

Connecting
20
Connecting2
Assembling the 
speaker (Front/Rear)
Preparation
Pole
Base
Speaker
Screw
Cable
1. Attach the pole to the base, then secure the 
connection with a supplied screw.
Step 1
Bottom of base
(Small screw)
2. Insert a speaker wire from the bottom of the 
base.
Step 2
Bottom of base
3. Attach the speaker to the pole, then secure the 
connection with a supplied screw.
Step 3
(Big screw)