LG Ht 462dz Owners Manual

							DVD RECEIVER
OWNER’S MANUAL
MODEL: HT462DZ
HT462DZ-D0
SH42DZ-S
SH42DZ-W
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and 
completely.
HT462DZ-D0_DESPLLK_ENG_3982
 
						

							2
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons. 
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
WARNING:Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect
it from overheating. 
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturers instruction have been adhered to.
CAUTION: 
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized
service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
circuits. Check the specification page of this owners
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug
it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an
authorized servicer.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord 
exits the appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the plug is easily accessible.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should
be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old appliance
will help prevent potential negative
consequences for the environment and
human health.
4. For more detailed information about disposal
of your old appliance, please contact your
city office, waste disposal service or the
shop where you purchased the product.
This product is manufactured to comply
with the EEC DIRECTIVE 2004/108/EC
and 2006/95/EC.
CLASS  1   LASER  PRODUCT
KLASSE 1  LASER  PRODUKT
LUOKAN 1 LASER  LAITE
KLASS  1   LASER  APPARAT
CLASSE 1  PRODUIT   LASER   
CAUTIONRISK OF ELECTRIC SHOCK 
DO NOT OPEN
CAUTION: TO REDUCE THE RISK 
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.
WARNING:TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
 
						

							3
IntroductionMaintenance and Service  . . . . . . . . . . . . . . . . .3
Before use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Front Panel/Rear Panel  . . . . . . . . . . . . . . . . . . .5
Remote Control  . . . . . . . . . . . . . . . . . . . . . . . . .6
Installation and SetupTV Connection  . . . . . . . . . . . . . . . . . . . . . . . . . .7
Optional Equipment Connection  . . . . . . . . . . . .8
Antenna Connection   . . . . . . . . . . . . . . . . . . . . .8
Assembling and Connecting to the Speakers  .9
Speaker System Connection  . . . . . . . . . . . . . . .9
HDMI Connection   . . . . . . . . . . . . . . . . . . . . . .10
Displaying Disc Information on-screen  . . . . . .11
Initial Settings  . . . . . . . . . . . . . . . . . . . . . . . . .11
General Operation  . . . . . . . . . . . . . . . . . . . .11-13
LANGUAGE   . . . . . . . . . . . . . . . . . . . . . . . . .11
DISPLAY  . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
AUDIO  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
LOCK (Parental Control)  . . . . . . . . . . . . . . . .13
OTHERS  . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
OperationGeneral features  . . . . . . . . . . . . . . . . . . . . . . .14
Additional features  . . . . . . . . . . . . . . . . . . . . .15
Controlling the TV  . . . . . . . . . . . . . . . . . . . . . .15
Playing an Audio CD or MP3/WMA file  . . . . . .16
Programmed Playback   . . . . . . . . . . . . . . . . . .16
Viewing a JPEG file    . . . . . . . . . . . . . . . . . . . .17
Playing a DivX Movie file   . . . . . . . . . . . . . . . .18
Presetting the Radio Stations  . . . . . . . . . . . . .19
Listening to the Radio  . . . . . . . . . . . . . . . . . . .19
RDS Operation  . . . . . . . . . . . . . . . . . . . . . . . . .20
DVD Audio Discs  . . . . . . . . . . . . . . . . . . . . . . .21
Sleep Timer Setting  . . . . . . . . . . . . . . . . . . . . .22
Dimmer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Mute  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Selecting input source . . . . . . . . . . . . . . . . . . .22
XTS pro  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
VIRTUAL sound  . . . . . . . . . . . . . . . . . . . . . . . .22
Sound Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . .22
ReferenceLanguage Codes  . . . . . . . . . . . . . . . . . . . . . . .23
Area Codes   . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Troubleshooting  . . . . . . . . . . . . . . . . . . . . .24-25
Specifications  . . . . . . . . . . . . . . . . . . . . . . . . .26
Maintenance and Service
Refer to the information in this chapter before
contacting a service technician.
Handling the unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
 Do not use volatile liquids such as insecticide spray
near the unit. 
 Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. 
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The DVD/CD Receiver is a high-tech, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. 
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use. 
For details, please contact your nearest authorized
service center.
 
						

							4
Before use
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future
reference.
This manual provides information on the operation
and maintenance of your DVD/CD Receiver. Should
the unit require service, contact an authorized service
location.
About the  Symbol Display
“  ” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Symbol Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
DVD
Audio CDs
MP3 files
WMA files
JPEG files
DivX files
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from Digital Theater Systems,
Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and world-
wide patents issued and pending. DTS and DTS Digital
Surround” are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2003 Digital Theater
Systems, Inc. All Rights Reserved.
Types of Playable DiscsDVD
(8 cm / 12 cm disc)
Audio CD 
(8 cm / 12 cm disc)
In addition, this unit can play a DVD±R, DVD±RW,
and CD-R or CD-RW that contains audio titles, MP3,
WMA, JPEG or DivX files.
Notes:
 Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs may not be played on the unit.
 Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
 Do not use irregularly shaped CDs (e.g., heart-
shapedor octagonal). It may result in malfunctions.
Regional Code This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled as the
same as the rear of the unit or “ALL”.
Notes on Regional Codes
 Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play. 
 If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
DivX
JPEG
WMA
MP3
ACD
DVD
Introduction
 
						

							5
Introduction
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent
damage to the unit.
HDMI OUT
OUT PUTINPUT
L - AUX - RMONITOR
YCOMPONENT VIDEO (PROGRESSIVE SCAN)
FM Antenna connector
AM Loop Antenna connectorsSPEAKER connectors Power Cord
MONITOR OUT connector
COMPONENT VIDEO OUT terminals
Connect to a TV with Y PBPRinputs.
Front Panel/Rear Panel
OUTPUT (TO TV) 
EURO AV socket
Connect to a TV with 
SCART jack.
Cooling fan
OPTICAL IN connector
AUX AUDIO Input
(L/R) connector
VIDEO OUT SELECTOR switchHDMI OUT
HDMI output providing a high quality 
interface for digital audio and video.
OPEN/CLOSE button
TUNING(-/+)/SKIP/
SEARCH(. .
/> >
)
Remote sensor AUDIO IN connectorVOLUME controllerPOWER
DISPLAY WindowDISC Tray
USB port
Connect to a USB port of a memory
device (USB memory etc.)FUNC.(-)/PLAY(B)Press and hold down this button
about 3 seconds, then press
repeatedly to select other function.
PAUSE (
X X)/
MONO/STEREO (ST.)STOP (x)
 
						

							6
Remote Control
Remote Control Operation Range
Point the remote control at the remote sensor and press the
buttons.
 
Distance:About 23 ft (7 m) from the front of the remote
sensor
 
Angle:About 30° in each direction in front of the remote sensor
Remote control battery installation
Remove the battery cover on the rear of the
remote control, and insert two R06 (size
AA) batteries with  and  aligned
correctly.
CautionDo not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).
OPEN/CLOSE (Z Z
)
Opens and closes the disc tray.DVDSelects the output source (CD/DVD).PROG./MEMO.Accesses or removes Program menu.
Enter a radio station’s frequency into
the tuner.
S-TITLE Selects a subtitle language (DVD).CLEARRemoves a track number on the
program menu or a mark on the 
MARKER SEARCH menu.
MARKER Marks a point during playback.
SEARCH Displays MARKER SEARCH menu.SCAN/SLOW(bb/BB) Searches backward or forward.
Reverse/ Forward slow playback.
REVERSE/FORWARD SKIP
(. .
/> >
)
TITLE
Displays the disc’s Title menu, if
available.
STOP (x x
)
PLAY (B)
PAUSE/STEP (X X
)
VSM
XTS pro
Supplies more natural and realistic
sound.
Supplies great sound effect.
SLEEPSets the System to turn off
automatically at a specified time.
MUTE
VOLUME (-/+) 
Adjusts speaker volume.RDSViews the various displays of the
RDS options.
RESOL.Changes the resolution depending on
your TV.
TVControls the TV. (LG TV only) 
(See page15)
TUNER
AUX
USB
AUDIOOPEN/CLOSE
SOUND S-TITLE CLEAR
MENU
SLEEP
MUTE
POWER
INPUTPR VOL
PTY/HDMI
RDS/RESOL.
ZOOMSETUP
ENTER
DISPLAY
RETURN
VOL
SCAN +
SKIPSCAN +
TITLESTOP PLAYPAUSE/STEP
REPEATREPEAT A-BMARKER SEARCHDVD
PROG./MEMO.
POWER
DIMMER
POWER
TUNER
Selects the System’s  tuner (FM and AM
bands).
AUX Selects input source.
USBPlays the multimedia files.
DIMMER Changes brightness of the display
window on the front panel during in
power-on status.
AUDIOSelects an audio language (DVD) or  an
audio channel (CD). 
SOUNDSelects the sound mode.
REPEATRepeats chapter, track, title, all
REPEAT A-BRepeats sequence.
MENU  Accesses the menu on a DVD disc.
ZOOM
SETUP
Accesses or removes setup menu.
DISPLAYAccesses On-Screen display.
RETURNRemoves the setup menu.
b/B/v/V(left/right/up/down)Selects an option in the menu.
ENTERAcknowledges the menu selection.
PRESET (-/+)Selects programme of Radio.
TUN. (-/+)Tunes in the desired radio station.
0-9 numerical buttonsSelects a service, programme number
directly or selects numbered options in
a menu.
PTYTo start a search for a specific PTY type.
HDMISwitches the HDMI mode to HDMI
(active) and OFF (inactive).
 
						

							7
Installation and Setup
Make one of the following connections, depending on
the capabilities of your existing equipment.
Tips:
 Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the 
DVD/CD Receiver. Use one of the
connections described below.
 Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution:
 Make sure the DVD/CD Receiver is connected
directly to the TV. Select the correct AV input on
your TV.
 Do not connect your DVD/CD Receiverto TV via
your VCR. The DVD image could be distorted by
the copy protection system. 
Video connection 
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the
video cable (V).
Component Video connection
Connect the COMPONENT VIDEO OUT jacks from
the DVD/CD Receiver to the corresponding jacks on
the TV using an Y P
BPRcable (C).
SCART connection
Connect the EURO AV OUTPUT (TO TV) socket on
the DVD/CD Receiver to the corresponding jacks on
the TV using the scart cable (T).

If your television is a high-definition or “digital
ready” television, you may take advantage of the
DVD/CD Receiver’s progressive scan output for the
highest video resolution. 
 If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
read owner’s manual for TV then set the resolution
that your TV can accept. 
Notes:
 The HDMI mode must be set to OFF for VIDEO
OUT and Component video connections.
 A picture via scart input is not supported.
Caution
VIDEO OUT SELECTOR switch
In power-off state, select either
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) or SCART signal of
EURO AV TO TV terminal depending on how
to connect the unit to the TV.
TV Connection
HDMI OUTHDMI OUT
OUT PUTINPUT
L - AUX - RMONITOR
YCOMPONENT VIDEO (PROGRESSIVE SCAN)
Y
COMPONENT VIDEO / 
PROGRESSIVE SCAN INPUT
L
VIDEO 
INPUTSCART INPUT
Installation and Setup
Rear of DVD/CD Receiver
Rear of TVVTC
 
						

							8
Optional Equipment Connection
USB connection (U)
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
Removing the USB Device from the unit
1. Choose a different function mode or press STOP
(x) twice in a row.
2. Remove the USB device from the unit.
Notes:
 Don’t extract the USB device while operating.
Music files (MP3/WMA), image files (JPEG) and
video files can be played.
 This unit can not use a USB HUB.
Recommended Memory Cards.Compact Flash Card (CFC), Micro Drive (MD), Smart 
Media Card (SMC), Memory Stick (MS), Secure Digital 
Card (SD), Multi Media Card (MMC), Memory Stick Pro
(MS-Pro)
- Compatible with : FAT16, FAT32
- Only use the memory cards recommended.
 Devices which require additional program
installation when you have connected the unit to a
computer are not supported.
 In case of a USB HDD, make sure to connect an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive are
supported. If there is an extension partition, it will not
be supported.
 If the drive of USB device is two or more, a drive
folder is displayed on the screen. If you want to
move to the initial menu after you select a folder,
press RETURN.
 Digital cameras and mobile phones are not
supported.
AUX IN connection (A)
Connect a Output of auxiliary device to the AUX
AUDIO Input (L/R) Connector.
OPTICAL IN connection (O)
Connect an optical output of DVD Player (or Digital
Device etc) to the OPTICAL IN connector.
AUDIO IN connection (D)
Connect a output of portable device (MP3 or PMP etc)
to the AUDIO input connector.
Antenna Connection
Connect the supplied FM/AM antenna for listening to
the radio.
 Connect the AM Loop antenna to the AM antenna
connector.
 Connect the FM Wire antenna to the FM antenna
connector.
Notes:
 To prevent noise pickup, keep the AM Loop antenna away
from the DVD/CD Receiver and other components.
 Be sure to fully extend the FM wire antenna.
After connecting the FM Wire antenna, keep it as
horizontal as possible.
VIDEO OUT IN
 AUDIO (L)
 AUDIO (R)
OPTICAL
OUT
HDMI OUTOUT PUTINPUT
L - AUX - RMONITOR
YCOMPONENT VIDEO (PROGRESSIVE SCAN)
HDMI OUTHDMI OUTOUT PUTINPUT
L - AUX - RMONITOR
YCOMPONENT VIDEO (PROGRESSIVE SCAN)
Rear of DVD/CD ReceiverU
O
A
D
Portable deviceTo AUDIO  OUT
To AUDIO  IN
AM Loop Antenna 
(supplied)
FM Wire Antenna
(supplied)
Auxiliary deviceDVD Player 
(or Digital 
Device, etc)
USB Memory, MP3 Player 
(or Memory Card Reader, etc.)To AUDIO OUT (L/R)
To AV IN AUDIO (L/R)
 
						

							9
Installation and Setup
Assembling the speaker stand
to the speaker
Before connecting the speakers, assemble the
speaker stand to the speaker as illustrated.
Notes:
 Do not catch the speaker cord between the
speaker and the post
 Do not drop the speaker when mounting.
Speaker System Connection
Connect the speakers using the supplied speaker
cables.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Notes:
 Be sure to match the speaker cable to the
appropriate terminal on the components: + to + and
– to –. If the cables are reversed, the sound will be
distorted and will lack base.
 If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid
excessive output on the speakers.
Base
HolePost1
2
3
1. Fix the post to the
base by rotating the
post. And Draw the
speaker cord through
the hole on the base.
2. Draw the speaker
cord through the hole
on the speaker. .
3. Fix the speaker to the
stand by rotating the
speaker. Connect the
speaker cord to the
appropriate terminals
on the speaker.
Front speaker
(Right)Front speaker
(Left)
Subwoofer
 
						

							10
HDMI Connection
About HDMI
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
an easy all- digital output to an HDMI or DI-equipped TV.
Connection to an HDMI TV requires an HDMI cable
while connection to a DVI-equipped TV requires a DVI
adapter besides a HDMI cable.
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connector), and communication
between the AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
If you have a HDMI TV or monitor, you can connect
it to this DVD/CD Receiver using a HDMI cable.
1. Connect the HDMI OUT jack on the DVD/CD
Receiver to the HDMI jack on a HDMI compatible
TV or monitor (H).
2. Set the TV’s source to HDMI (refer to owner’s
manual for TV).
3. In the stop mode, select HDMI mode by pressing
HDMI. Press RESOL. repeatedly to select the
resolution you wish to change.
Notes:
 The arrow on the cable connector body should
face up for correct alignment with the connector on
the DVD/CD Receiver.
 If HDMI cable is not connected, the HDMI button
does not operate.
 If there is noise or there are lines 
on the screen, please check 
the HDMI cable.
 Not all HDCP-compatible 
DVI devices will work with 
this DVD/CD Receiver.
 If TV does not support HDCP, snow noise appears
on the screen, or picture may be vibrated.
Tip :
When you use HDMI connection, you can change the
resolution (480p or 576p, 720p, 1080i, 1080p) for the
HDMI output by pressing RESOL. on the Remote
Control.
Resolution setting
You can change the resolution for the COMPONENT
VIDEO OUT by pressing RESOL. on the Remote
Control. Available resolution settings are as shown
below.
OUTPUT Available Resolution
CONNECTION PAL NTSC
1920 x 1080p 1920 x 1080p
HDMI 1920 x 1080i 1920 x 1080i
VIDEO OUT 1280 x 720p 1280 x 720p
720 x 576p 720 x 480p
COMPONENT 1920 x 1080i 1920 x 1080i
VIDEO OUT 1280 x 720p 1280 x 720p
720 x 576p 720 x 480p
720 x 576i 720 x 480i
MONITOR OUT 720 x 576i 720 x 480i
SCART 720 x 576i -
Notes:
 If the picture does not appear on the screen with
the analog video connections, change the
resolution to 480i (or 576i).
 For 720p and 1080i resolution on the component
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
displayed at the 576p(PAL) 480p(NTSC) resolution.
 1080p,1080i, 720p, 576p and 480p does not work
with the analog video connections (MONITOR
OUT).
 The component (Y/PB/PR) will output to black
picture in the RGB mode.
 If you change the resolution, the display MENU
(MP3/JPEG/DivX) size is changed.
 If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read owner’s manual for TV, and then set
the resolution that your TV can accept.
Caution:
Changing the resolution when the DVD/CD Receiver
is connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
DVD/CD Receiver and then turn it on again.
HDMI
HDMI OUT
OUT PUTINPUT
L - AUX - RMONITOR
YCOMPONENT VIDEO (PROGRESSIVE SCAN)
H
HDMI compatible TV Rear of DVD/CD Receiver
(Not supplied)