LG Ht806th Owners Manual

Ope\bati\fg31
Operating4
Viewi\fg a PHOTO file
i
This	unit	can	play	discs	with	photo	files.
1.	 Select	[Photo]	on	the	[\fome	Menu]	and	press	b	ENTER.
Moving	to	the	previous	or	next	file	list.
Returning	to	the	upper	
folder.	
2.	 Press	WS	to	select	a	folder,	and	then	press	b	ENTER.	
3.	 If	you	want	to	view	a	slide	show,	press	WS	to	highlight	a	file	and	press	d	PLAY, MONO/STEREO.	
Abou\f help menu in \f\ghe [Pho\fo] menu
MenuBu\f\fons Opera\fion
d,Sli\be Show
d,PLAY, MONO/STEREO
Viewing	a	slide	show....

Ope\bati\fg32
Operating4
Sleep Time\b Setti\fg
Press	SLEEP	one	or	more	times	to	select	delay	time	between	10	and	180	minutes,	after	the	unit	will	turn	off.
To	check	the	remaining	time,	press	SLEEP.
To	cancel	the	sleep	function,	press	SLEEP	repeatedly	until	“S\bEEP	10”	appears,	and	then	press	SLEEP	once	again	while	 “S\bEEP	10”	is	displayed.
You	can	check	the	remaining	time	before	the	
Unit	turns	off.
Press	SLEEP 	The 	remaining 	time 	appears 	in 	the	
display	window.,
,Note
Dimme\b
Press	SLEEP	once....

Ope\bati\fg33
Operating4
Radio Ope\batio\fs
Be	sure	that	both	FM/AM	aerials	are	connected.	(Refer	to	the	page	21.)
Liste\fi\fg to the \badio
1.	 Press	P	RADIO&INPUT until	FM/AM	appears	in	the	display	window.	The	last	received	station	is	tuned	in.
2.	 Press	and	hold	TUNING	(-/+)	for	about	two	seconds	until	the	frequency	indication	starts	to	change,	then	release.	Scanning	stops	when	the	unit	tunes	in	a	station.
or
	 Press	TUNING	(-/+)	repeatedly.
3.	 Adjust	the	volume	by	rotating	VOLUME	on	the	front	panel...

Ope\bati\fg34
Operating4
Sou\fd adjustme\ft
Setti\fg the su\b\bou\fd mode
This	system	has	a	number	of	pre-set	surround	sound	fields.	You	can	select	a	desired	sound	mode	by	using	SOUND EFFECT.
You	can	change	the	SOUND EFFECT	using	\fD	arrow	key	while	the	sound	effect	information	is	displayed	on.
The	displayed	items	for	the	equalizer	maybe	different	depending	on	sound	sources	and	effects.
On DisplayDescrip\fion
NAT	P\bUS
The	NAT	P\bUS	is	Natural	Plus	sound	effect.	 You	can	enjoy	the	natural	sound	effect...

Ope\bati\fg35
Operating4
Adva\fced Ope\batio\fs
Reco\bdi\fg to USB
You	can 	record 	music 	or 	sound 	souce 	to 	USB 	device	by	connecting	in	to	the	port	on	the	unit.
1.	 Connect	the	USB	device	to	the	unit.
2.	 Select	a	mode	in	which	you	want	to	record.	Play	back	a	sound	source	first.
3.	 Start	the	recording	by	pressing	X	REC.
4.	 To	stop	recording,	press	\b	STOP.
[All \fracks/ files recor\bing]
Record	to	USB	in	stop	or	play	mode.
[Program lis\f recor\bing]
After	marking	desired	file(s)	and	you	can...

Ope\bati\fg36
Operating4
Usi\fg a Bluetooth 
wi\beless tech\fology
About Bluetooth
Bluetooth®	is	wireless	communication	technology	for	short	range	connection.	
The	available	range	is	within	10	meters.
( The	sound	may	be	interrupted	when	the	connection	interfered	by	the	other	electronic	wave	or		you	connect	the	bluetooth	in	the	other	rooms.)	Connecting	individual	devices	under		Bluetooth®	wireless	technology	does	not	incur	any	charges.	A	mobile	phone	with		Bluetooth®	wireless	technology	can	be	operated...

Ope\bati\fg37
Operating4
Liste\fi\fg to music o\f this u\fit 
usi\fg Bluetooth device
Pai\bi\fg you\b u\fit a\fd Bluetooth 
device
Before	you	start	the	pairing	procedure,	make	sure	the	Bluetooth	feature	is	turned	on	in	to	your	Bluetooth	device.	Refer	to	your	Bluetooth	device’s	user	guide.	Once	a	pairing	operation	is	performed,	it	does	not	need	to	be	performed	again.
1.	 Select	a	function	other	than	the	Bluetooth	function	by	using	the	P	RADIO&INPUT.
2.	 Place	the	Bluetooth	device	to	be	connected	to	this...

5	 Troubleshooting
Ope\bati\fg38
Operating4
	
y This	units	dose	not	be	supported	the	Mono	
\feadset	Profile	(\fands	Free	Profile)
	
y The	sound	may	be	interrupted	when	
the	connection	interfered	by	the	other	
electronic	wave.
	
y You	cannot	control	the	Bluetooth	device	
with	this	unit.
	
y Pairing	is	limited	one	Bluetooth	device	per	
one	unit	and	multi-pairing	is	not	supported.
	
y Although	the	distance	between	your	
Bluetooth
	and 	the 	set 	is 	less 	than 	10m, 	there	
are	obstacles	between	both,	your...

5	 Troubleshooting
T\boubleshooti\fg39
Troubleshooting5
T\boubleshooti\fg
PROBLEMCORRECTION
No	powerPlug	the	power	cord	into	the	wall	outlet	securely.
No	picture
Select	the	appropriate	video	input	mode	on	the	TV	so	the	picture	from	the	unit	appears	on	the	TV	screen.
Connect	the	video	cables	securely	to	both	the	 TV	and	unit.
There	is	little	or	no	sound
Select	the 	correct 	input 	mode 	of 	the 	unit 	so 	you 	can 	hear 	the 	sound	from	the	unit.
Connect	the	audio	cables	into	the	connection	terminals...

6	 Appendix
Appe\fdix40
Appendix6
Mai\fte\fa\fce
Ha\fdli\fg the U\fit
Whe\f shippi\fg the u\fit
Please	save	the	original	shipping	carton	and	packing	materials.	If	you	need	to	ship	the	unit,	for	maximum	protection,	re-pack	the	unit	as	it	was	originally	packed	at	the	factory.
Keeping	the	exterior	surfaces	clean
	yDo	not	use	volatile	liquids	such	as	insecticide	spray	near	the	unit.	
	yWiping	with	strong	pressure	may	damage	the	surface.
	yDo	not	leave	rubber	or	plastic	products	in	contact	with	the	unit	for	a...