LG Hw300y Projector Owners Manual
Have a look at the manual LG Hw300y Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 9
9ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing\
accessories, contact the local dealer where you purchased your product. \
The illustrations in this manual may differ from the actual product and \
item.
USB
& (
* )
화면가림
방송안내
정보표시
화면정지
위젯
Key’sÝ
Key’sÜ
음량 채널
1 @4 GHI7 PQRS-2 ABC5 JKL8 TUV0 3 DEF6 MNO9 WXYZ이전채널
MY MEDI
A
선호채널 선택
화면크기
메뉴 간편설정
이전
나가기
자동조 정
확인
Ù
한/영/숫자조용히지움 외부입력
채널목록 쌍자음
페
이
지
ㄱ ㄴㅏㅓ
ㄹ ㅁㅗㅜ
ㅅ...](http://img.usermanuals.tech/thumb/47/91413/w64_lg-electronics-hw300y-manual_d-8.png "Page 9
9ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing\
accessories, contact the local dealer where you purchased your product. \
The illustrations in this manual may differ from the actual product and \
item.
USB
& (
* )
화면가림
방송안내
정보표시
화면정지
위젯
Key’sÝ
Key’sÜ
음량 채널
1 @4 GHI7 PQRS-2 ABC5 JKL8 TUV0 3 DEF6 MNO9 WXYZ이전채널
MY MEDI
A
선호채널 선택
화면크기
메뉴 간편설정
이전
나가기
자동조 정
확인
Ù
한/영/숫자조용히지움 외부입력
채널목록 쌍자음
페
이
지
ㄱ ㄴㅏㅓ
ㄹ ㅁㅗㅜ
ㅅ...")
![Page 10
10ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement witho\
ut any
notification.
Contact your dealer for buying these items.
1 Use screw size: M4x6-M4x8
Projection ScreenTripodHDMI Cable
Video CableAudio CableComponent Cable
AJ-CB2AJ-CB2+AJ-CS60
Ceiling Mounting Bracket1](http://img.usermanuals.tech/thumb/47/91413/w64_lg-electronics-hw300y-manual_d-9.png "Page 10
10ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement witho\
ut any
notification.
Contact your dealer for buying these items.
1 Use screw size: M4x6-M4x8
Projection ScreenTripodHDMI Cable
Video CableAudio CableComponent Cable
AJ-CB2AJ-CB2+AJ-CS60
Ceiling Mounting Bracket1")
![Page 11
11ASSEMBLING AND PREPARING
Parts and Buttons
* This projector is manufactured using high-precision technology. You may,\
however, see on the Projector screen tiny black points and/or bright poi\
nts (red,
blue, or green). This can be a normal result of the manufacturing proce\
ss and
does not always indicate a malfunction.
&,1
5*%,1
$9,1 &20321(17, 1
Exhaustion
Direction1
Speaker
Focus ring
lens2
ButtonDescription
92/
(POWER)Turns the projector ON/OFF.
92/
(MENU)Displays or closes...](http://img.usermanuals.tech/thumb/47/91413/w64_lg-electronics-hw300y-manual_d-10.png "Page 11
11ASSEMBLING AND PREPARING
Parts and Buttons
* This projector is manufactured using high-precision technology. You may,\
however, see on the Projector screen tiny black points and/or bright poi\
nts (red,
blue, or green). This can be a normal result of the manufacturing proce\
ss and
does not always indicate a malfunction.
&,1
5*%,1
$9,1 &20321(17, 1
Exhaustion
Direction1
Speaker
Focus ring
lens2
ButtonDescription
92/
(POWER)Turns the projector ON/OFF.
92/
(MENU)Displays or closes...")
![Page 13
13ASSEMBLING AND PREPARING
Basic Operation of the Projector
1 Place the projector on a sturdy and horizontal surface.
2 Place the projector with the desired distance from the screen. The dista\
nce
between the projector and the screen determines the actual size of the i\
mage.
3 Position the projector so that the lens is set at a right angle to the s\
creen. If the
projector is not set at a right angle, the screen image will be crooked.\
Although,
slight angles can be counteracted using the Keystone...](http://img.usermanuals.tech/thumb/47/91413/w64_lg-electronics-hw300y-manual_d-12.png "Page 13
13ASSEMBLING AND PREPARING
Basic Operation of the Projector
1 Place the projector on a sturdy and horizontal surface.
2 Place the projector with the desired distance from the screen. The dista\
nce
between the projector and the screen determines the actual size of the i\
mage.
3 Position the projector so that the lens is set at a right angle to the s\
creen. If the
projector is not set at a right angle, the screen image will be crooked.\
Although,
slight angles can be counteracted using the Keystone...")
![Page 14
14ASSEMBLING AND PREPARING
Kensington Security System
y
This projector has a Kensington Security System Connector on the panel. \
Connect a Kensington Security System cable as below.
y
For detailed installation and use of the Kensington Security System, ref\
er to the
user’s guide included with the Kensington Security System set. And fo\
r further
information, contact http://www.kensington.com, the internet homepage of the
Kensington company that deals with expensive electronic equipment such a\...](http://img.usermanuals.tech/thumb/47/91413/w64_lg-electronics-hw300y-manual_d-13.png "Page 14
14ASSEMBLING AND PREPARING
Kensington Security System
y
This projector has a Kensington Security System Connector on the panel. \
Connect a Kensington Security System cable as below.
y
For detailed installation and use of the Kensington Security System, ref\
er to the
user’s guide included with the Kensington Security System set. And fo\
r further
information, contact http://www.kensington.com, the internet homepage of the
Kensington company that deals with expensive electronic equipment such a\...")
![Page 15
15REMOTE CONTROL
REMOTE CONTROL
Remote control (FOR
HW300Y/HW301Y)
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the pro\
jector correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA\
) matching the and ends to the label inside the compartment, and close the battery cover. \
To remove the batteries, perform the installation actions in reverse.
CAUTION
yRISK OF EXPLOSION IF BATTERY IS REPLACED...](http://img.usermanuals.tech/thumb/47/91413/w64_lg-electronics-hw300y-manual_d-14.png "Page 15
15REMOTE CONTROL
REMOTE CONTROL
Remote control (FOR
HW300Y/HW301Y)
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the pro\
jector correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA\
) matching the and ends to the label inside the compartment, and close the battery cover. \
To remove the batteries, perform the installation actions in reverse.
CAUTION
yRISK OF EXPLOSION IF BATTERY IS REPLACED...")
11ASSEMBLING AND PREPARING Parts and Buttons * This projector is manufactured using high-precision technology. You may,\ however, see on the Projector screen tiny black points and/or bright poi\ nts (red, blue, or green). This can be a normal result of the manufacturing proce\ ss and does not always indicate a malfunction. &,1 5*%,1 $9,1 &20321(17, 1 Exhaustion Direction1 Speaker Focus ring lens2 ButtonDescription 92/ (POWER)Turns the projector ON/OFF. 92/ (MENU)Displays or closes menus. VOL -, +Adjusts the volume level. ∧, ∨, ＜, ＞Adjusts functions of menus. ꔉ(OK)Checks present mode and saves the change of functions. 1 High heat, keep the area near the exhaust clear. 2 Do not touch the lens when using the projector or opening the lens cap. Control panelRear Connection panel 92/
12ASSEMBLING AND PREPARING Installation Installation Precautions yAlways provide proper ventilation for this projector. - The projector is equipped with ventilation holes. Do not block or place anything near these holes. Internal heat build-up may occur, causing picture degradation or damage to the projector. - Do not place the projector on a carpet, rug or other similar surface. It may prevent a adequate ventilation of the projector bottom. This product should be mounted to a wall or ceiling only. - Never push the projector or spill any kind of liquid into the projector. - Leave an adequate distance (30 cm or more) around the projector. yPlace this projector in adequate temperature and humidity conditions. - Install this projector only in a location where adequate temperature and humidity is available. (See p.68) yDon’t place the projector where it can be covered with excessive dust. - This may cause overheating of the projector. yDo not obstruct the slots and openings of the projector. This may cause overheating and cause a fire hazard. yThis projector is manufactured using high-precision technology. You may, however, see tiny black points and/ or bright points (red, blue or green) that continuously appear on the projector Screen. This is a normal result of the manufacturing process and does not indicate a malfunction. yThe remote control may not work when a lamp equipped with electronic ballast or a three- wavelength lamp is installed. Replace those lamps with international standard products to use the remote control normally.
13ASSEMBLING AND PREPARING Basic Operation of the Projector 1 Place the projector on a sturdy and horizontal surface. 2 Place the projector with the desired distance from the screen. The dista\ nce between the projector and the screen determines the actual size of the i\ mage. 3 Position the projector so that the lens is set at a right angle to the s\ creen. If the projector is not set at a right angle, the screen image will be crooked.\ Although, slight angles can be counteracted using the Keystone adjustement. (See \ p.21). 4 After placing the projector in its desired location, connect the video i\ nput(s). Then connect the power cable to the projector and the wall outlet. Projection offset ratio: 100% Vertical Size (X) X/2 X/2 Horizontal Size (Y) Y/2 Y/2 Screen Projection distance (D)Projection distance (D) Screen 51 mm 508 635 762 889 1016 1143 1270 1397 1524 1651 1778 1905 2032 2159 2286 2413 2540 431 538 646 754 861 969 1077 1185 1292 1400 1508 1615 1723 1831 1938 2046 2154 269 337 404 471 539 606 673 741 808 875 943 1010 1077 1145 1212 1279 1347 586 737 887 1038 1200 1342 1492 1643 1794 1947 2097 2248 2399 2552 2702 2853 3004 16 : 9 Scale Diagonal Size (mm)Horizontal Size (Y) (mm)Vertical Size (X) (mm)Projection Distance (D) (mm)
14ASSEMBLING AND PREPARING Kensington Security System y This projector has a Kensington Security System Connector on the panel. \ Connect a Kensington Security System cable as below. y For detailed installation and use of the Kensington Security System, ref\ er to the user’s guide included with the Kensington Security System set. And fo\ r further information, contact http://www.kensington.com, the internet homepage of the Kensington company that deals with expensive electronic equipment such a\ s notebook PCs or projectors. y The Kensington Security System is an optional item. How to Install the Projector Using a Tripod * You can install this projector using a camera tripod. * When stabilizing the tripod, we recommend using the locking bolt of stan\ dard size 4.5 mm or less.The maximum size allowed for the locking bolt is 6.5\ mm.(If it is longer than the maximum allowed size, it may damage the projector.\ ) +⇒ Part connected to the tripodTripod Projector is connected to this part. Bottom side of Projector
15REMOTE CONTROL REMOTE CONTROL Remote control (FOR HW300Y/HW301Y) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the pro\ jector correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA\ ) matching the and ends to the label inside the compartment, and close the battery cover. \ To remove the batteries, perform the installation actions in reverse. CAUTION yRISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED BATTERIES AT A RECYCLING DROP-OFF LOCATION. yDo not mix old and new batteries, as this may damage the remote control.\ USB & ( * ) 화면가림 방송안내 정보표시 화면정지 위젯 Key’sÝ Key’sÜ 음량 채널 1 @ 4 GHI 7 PQRS-2 ABC 5 JKL 8 TUV 0 3 DEF 6 MNO 9 WXYZ이전채널 MY MEDI A 선호채널 선택 화면크기 메뉴 간편설정 이전 나가기 자동조 정 확인 Ù 한/영/숫자 조용히지움 외부입력 채널목록 쌍자음 페 이 지 ㄱ ㄴㅏㅓ ㄹ ㅁㅗㅜ ㅅ ㅇㅣ 획추 가 ㅡPOWERTurns the projector on or off. USB/MY MEDIAAccess MY MEDIA. INPUTChanges the input source. Alphanumeric buttonsEnters letters and numbers. SLEEPSets the length of time until the projector to turns off. VOLAdjusts the volume level.MARKSelects a menu or option.CHAR/NUMSwitches between Letter and Number input modes. RATIOResizes an image.DELETEDeletes letters and numbers. MUTEMutes all sounds PAGEMoves to the previous or next screen.
16REMOTE CONTROL USB & ( * ) 화면가림 방송안내 정보표시 화면정지 위젯 Key’sÝ Key’sÜ 음량 채널 1 @ 4 GHI 7 PQRS-2 ABC 5 JKL 8 TUV 0 3 DEF 6 MNO 9 WXYZ이전채널 MY MEDI A 선호채널 선택 화면크기 메뉴 간편설정 이전 나가기 자동조 정 확인 Ù 한/영/숫자 조용히지움 외부입력 채널목록 쌍자음 페 이 지 ㄱ ㄴㅏㅓ ㄹ ㅁㅗㅜ ㅅ ㅇㅣ 획추 가 ㅡ MENUAccesses on Screen Menus. NETCASTSelect the desired NETCAST menu source. Q.MENUAccesses the quick menu. Navigation buttons (up/down/left/right)Scrolls through menus or options.OKSelects menus or options and confirms your input. BACKReturns to the previous level. AUTOAutomatically adjusts the input from a computer.. EXITClears all on-screen displays and returns to projector viewing. Control buttonsControls the NETCAST or MY MEDIA. BLANKTurns the projector screen on or off. STILLFreeze the moving image.Functions as the STILL button in any mode other than DivX. PICTUREAdjusts Keystone.Change the image mode. Key'sAdjusts Keystone. Color buttonsThese access special functions in some menus.
17REMOTE CONTROL Remote control (FOR HW300G/HW301G) .H\ VÜ.H\ VÝ 0
19WATCHING PROJECTOR WATCHING PROJECTOR Watching Projector Turning on for the First Time 1 Make sure the power cord is connected correctly. 2 After wait for a moment, press the POWER button on the remote control or control panel. (The light on the control panel will be turned on.) yPress the INPUT button on the remote control to select the input signal you want. yVerify the lens cap is removed before turning on the power. 3 Follow the on-screen instructions to customize your projector settings according to your preferences. LanguageSelects a language to display. Focus and Position of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen properly. Focus ring yTo adjust the focus of the image, rotate the focus ring. Operating the Projector 1 In Standby mode, press the POWER to turn the projector on. 2 Press INPUT and select desired input. 3 Control the projector using the following buttons while you are watching projector. ButtonDescription 0 - 9Entering numbers. (For HW300Y/HW301Y) VOL -, +Adjusts the volume level. MUTEMutes all sounds. Q.MENUAccesses the quick menus. (See p.22) RATIOResizes an image. Key'sAdjusts Keystone. (See p.21) 4 To turn the projector off, press the POWER.
20WATCHING PROJECTOR Using Additional Options Adjusting Aspect Ratio Resize an image to view at its optimal size by pressing RATIO while you are watching projector. NOTE ySome options may not be available depending on input signals. yYou can also change the image size by pressing Q.MENU or MENU. - 16:9: Resizes images to fit the screen width. - Just Scan: Displays video images in the original size without cutting off the edges. NOTE yIf you select Just Scan, you may see image noises at the edge or edges of the screen. - Set By Program: Displays images in the same aspect ratio as the original image. - 4:3: Resizes images to the previous standard. - Zoom: Enlarges an image to fit the screen width. The top and bottom of the image may not appear. yAdjust proportion of Zoom, press ︿ or ﹀ . yMove the image on the screen, press ︿ or ﹀. - Cinema Zoom: Formats an image to the cinemascope ratio, 2.35:1. yTo change the ratio of the cinema zoom, press ︿ or ﹀ and its range is from 1 to 16. yTo move the zoom focus up or down, press ︿ or ﹀. NOTE yIf you enlarge or reduce an image, the image may be distorted.