LG Projector PH150G User Manual

41
Using	the	Quick	Menu
You can easily customize your frequently used menus.
1 Press the  button.
2 Press the  or  button to select a menu and press 	button.
MenuDescription
Aspect	RatioResizes the picture.
PJT	ModeTurns the projected image upside down or flips it horizontally.
Picture	ModeChanges the picture mode.
Sound	ModeSets the sound mode.
Sleep	TimerSets the projector to be turned off at the specified time.
Clear	Voice	IIMakes the voice from the projector crisp and clear.
Energy	Saving
Reduces...

42
ENTERTAINMENT
Using	SCREEN	SHARE
1 Set the external input of the projector to SCREEN	SHARE.
2 Enable related SCREEN SHARE function on the device you wish to connect.
3 Connect the projector from the search list on the device you wish to connect. (When you connect the projector to your laptop, input the PIN code shown on your display. The request for a PIN will be shown only at the initial connection.)
4 If the desired device accepts the request, SCREEN SHARE will be started.
•	Windows 7 / 8 / 8.1 / 10...

43
Setting	Up	Bluetooth	on	the	Projector
This option is used to output sound from the projector through Bluetooth\
 audio devices.
•	Press the  button on the remote control, and then set Bluetooth to On in the WIRELESS menu.
•	The devices that can be connected are as follows: LG BTS1, LG 
HBS-700, LG HBS-730, LG HBS-800 (Models available for purchase 
may vary by region.)
•	 Products from other manufacturers may not be compatible.
•	 You can use the remote control to adjust the volume of the 
connected...

44
Searching	for	Bluetooth	Devices	and	Connecting
Go to SETTINGS → WIRELESS → Search	Device to search for nearby Bluetooth audio devices and then connect any detected devices to the projector.
(If the device name is longer than 20 characters, no more than 20 will \
be displayed.)
1 Set the Bluetooth device to pairing mode and then select Search	Device.
•	Select Stop	searching to view the devices detected so far.
•	If the device has not been detected, check that the device is powered on and in pairing...

45
2 When the search is complete, you can select a Bluetooth device and connect to it.
•	You can stop the connection process immediately by selecting Stop	searching.
•	The time it takes to connect to a device may vary according to the signal strength and the number of devices.
Search Device
Stop searching Close
List
Please wait.Searching...
Search Device
List
Press OK(ꔉ) to connect the device.
HBS-700Search complete
Re-search Close
3 When a Bluetooth device is connected, you will hear sound from the...

46
Connecting,	Disconnecting,	or	Deleting	Bluetooth	
Devices	in	the	List	of	registered	devices
In SETTINGS → WIRELESS → List	of	registered	devices, Bluetooth devices are shown in the order that they were connected, and the same devices can be reconnected simply by selecting them without having to search for them again.
List of registered devices
List
HBS-700
Delete All Close
Press OK(ꔉ) to connect the device.Delete
Connecting
Select a Bluetooth device from the List	of	registered	devices to connect to...

47
Deleting
Select Delete	Marked or Delete	All to delete any registered devices.
•	Delete	Marked: Press the red button in List	of	registered	devices to delete the selected device.
•	Delete	All: Select Delete	All in List	of	registered	devices to delete all of the registered devices.
Adjusting	AV	Sync.	Adjust
When a Bluetooth device is connected, go to SETTINGS → WIRELESS → AV	Sync.	Adjust to adjust the synchronization between the video and the Bluetooth headset sound.
• AV Sync. Adjust     10◀ ▶
	OK
•...

48
MY	MEDIA
Before	Using
Connecting	a	USB	Device
Connect a USB device (external HDD, USB memory) to the USB port of projector to enjoy the content files stored in the USB device with your projector. You cannot write or delete data in the USB device. Connect a USB flash drive as shown below.
 
USB flash Drive
Removing	a	USB	Device
1 Click the  button.
2 Use the  or   button to move to USB	Device and press the 	button.
3 Select a USB to remove. Wait for confirmation that the USB device has stopped before...

49
Tips	for	using	a	USB	device
•	If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work. 
•	Some USB storage devices may not work or may work incorrectly.
•	If you use a USB extension cable, the USB device may not be recognized or may not work properly.
•	Use only USB storage devices formatted with the Windows FAT32 or NTFS file system.
•	For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated...

50
To	Use	My	Media
1 Press the 	button on the remote control.
2 Select MY	MEDIA.
Select desired file from the list. Watch the chosen file.
Sets play related settings by checking option during disk playback.
My	Media	supporting	file
•	Maximum data transmission rate: 20 Mbps (Mega bit per second)
•	External supported subtitle formats: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX\
)
•	Internal supported subtitle formats: SRT/ASS/SSA (Supports internal...