LG Stylo 2 Plus User Guide

For Your Safety100
Any belt-clips, holsters, and similar accessories containing metallic 
components may not be used. Avoid the use of accessories that cannot 
maintain 0.39 inches (1.0 cm) distance between the user’s body and the 
back of the phone and have not been tested for compliance with FCC RF 
exposure limits.
Consumer Information About Radio Frequency 
Emissions
Your wireless phone, which contains a radio transmitter and receiver, 
emits radio frequency energy during use. The following consumer...

For Your Safety101
is available at http://www.fcc.gov/cgb/ cellular.html or through the FCC at 
(888) 225-5322 or (888) CALL-FCC.
What does “SAR” mean?
In 1996, the FCC, working with the FDA, the U.S. Environmental 
Protection Agency, and other agencies, established RF exposure safety 
guidelines for wireless phones in the United States. Before a wireless 
phone model is available for sale to the public, it must be tested by the 
manufacturer and certified to the FCC that it does not exceed limits...

For Your Safety102
phone is mounted against the waist or other part of the body during use, 
then that part of the body will absorb more RF energy. Wireless phones 
marketed in the U.S. are required to meet safety requirements regardless 
of whether they are used against the head or against the body. Either 
configuration should result in compliance with the safety limit.” Also, if 
you use your wireless phone while in a car, you can use a phone with an 
antenna on the outside of the vehicle. You should...

For Your Safety103
Telephone: (888) INFO-FDA 
http://www.fda.gov (Under “c” in the subject index, select Cell Phones > 
Research.)
U.S. Federal Communications Commission
445 12th Street, S.W. 
Washington, D.C. 20554 
Telephone: (888) 225-5322 
http://www.fcc.gov/oet/rfsafety
Independent Expert Group on Mobile Phones
http://www.iegmp.org.uk 
Royal Society of Canada Expert Panels on Potential Health Risks of 
Radio Frequency Fields from Wireless Telecommunication Devices
283 Sparks Street  
Ottawa, Ontario...

For Your Safety104
http://www.ansi.org
National Council on Radiation Protection and Measurements
7910 Woodmont Avenue, Suite 800 
Bethesda, MD 20814-3095 
Telephone: (301) 657-2652  
http://www.ncrponline.org
Engineering in Medicine and Biology Society, Committee on Man 
and Radiation (COMAR) of the Institute of Electrical and Electronics 
Engineers
http://ewh.ieee.org/soc/embs/comar/
Consumer Information on SAR
(Specific Absorption Rate)
This model phone meets the governments requirements for exposure...

For Your Safety105
the power output.
Before a phone model is available for sale to the public, it must be tested 
and certified to the FCC that it does not exceed the limit established by 
the government-adopted requirement for safe exposure. The tests are 
performed in positions and locations (e.g., at the ear and worn on the 
body) as required by the FCC for each model. 
The highest SAR values are:
* Head: 0.69 W/kg
* Body (Body-worn/Ho
 tspot): 0.87 W/kg
(Body measurements differ among phone models,...

For Your Safety106
FCC Hearing-Aid Compatibility (HAC) Regulations for 
Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission (FCC) 
Report and Order in WT Docket 01-309 modified the exception of 
wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC 
Act) to require digital wireless phones be compatible with hearing-
aids. The intent of the HAC Act is to ensure reasonable access to 
telecommunications services for persons with hearing disabilities.
While some...

For Your Safety107
A sum of 5 is considered acceptable for normal use. A sum of 6 is 
considered for best use.
In the above example, if a hearing aid meets the M2 level rating and the 
wireless phone meets the M3 level rating, the sum of the two values equal 
M5. This should provide the hearing aid user with “normal usage” while 
using their hearing aid with the particular wireless phone. “Normal usage” 
in this context is defined as a signal quality that’s acceptable for normal 
operation.
The M mark is...

For Your Safety108
Caution:  
Avoid potential hearing loss.
Prolonged exposure to loud sounds (including music) is the most common 
cause of preventable hearing loss. Some scientific research suggests 
that using portable audio devices, such as portable music players and 
cellular telephones, at high volume settings for long durations may 
lead to permanent noise-induced hearing loss. This includes the use 
of headphones (including headsets, earbuds and Bluetooth® or other 
wireless devices). Exposure to...

For Your Safety109
any temporary hearing difficulty after listening to your portable audio 
device, discontinue use and consult your doctor.
TIA Safety Information
The following is the complete TIA Safety Information for wireless 
handheld phones. 
Exposure to Radio Frequency Signal
Your wireless handheld portable phone is a low power radio transmitter 
and receiver. When ON, it receives and sends out Radio Frequency (RF) 
signals.
In August, 1996, the Federal Communications Commissions (FCC) 
adopted RF...