Life Fitness T5 5 Manual
Here you can view all the pages of manual Life Fitness T5 5 Manual. The Life Fitness manuals for Treadmill are available online for free. You can easily download all the documents as PDF.
Page 11
9 2 LIfe fItneSS t5 treaDmILL DeSIgn ILLuStratIon Running Belt / Running Deck Motor Cove r Right Upright Left Upright Water Bottle Holder Console iP od Dock ing Station Headphone Jack Contac t Hear t Rate Sensors Side R ail Base Fr ame Assembly Handlebar Ac tivity Z one On / Of Switch Po wer Cord Reading Rack Emergenc y Stop USB Port Rear Roller Adjustment Bolts FlexDeck® T5 with Track Console
Page 12
![Page 12
10
3 aSSembLy
3.1 unpackIng
For safety, and to save time and effort, read this Owner’s Manual completely before installing your Life Fitness Treadmill.
Place the treadmill near where it will be used before beginning the unpa\
cking procedure.
These unpacking instructions assume you have already done the following:\
ƒRemoved the top of the shipping carton.
ƒRemoved the corrugate packing material.
ƒRemoved these assembly instructions from the bridge assembly carton.
The best method for...](http://img.usermanuals.tech/thumb/2918/103897/w300_t5-5-manual-1515508261_d-11.png "Page 12
10
3 aSSembLy
3.1 unpackIng
For safety, and to save time and effort, read this Owner’s Manual completely before installing your Life Fitness Treadmill.
Place the treadmill near where it will be used before beginning the unpa\
cking procedure.
These unpacking instructions assume you have already done the following:\
ƒRemoved the top of the shipping carton.
ƒRemoved the corrugate packing material.
ƒRemoved these assembly instructions from the bridge assembly carton.
The best method for...")
10 3 aSSembLy 3.1 unpackIng For safety, and to save time and effort, read this Owner’s Manual completely before installing your Life Fitness Treadmill. Place the treadmill near where it will be used before beginning the unpa\ cking procedure. These unpacking instructions assume you have already done the following:\ ƒRemoved the top of the shipping carton. ƒRemoved the corrugate packing material. ƒRemoved these assembly instructions from the bridge assembly carton. The best method for...
Page 13
11 3.2 component LISt anD HarDware Identify the following components after unpacking your treadmill: 1Left UprightQty: 1 2M10 X 25MM Bolt Qty: 12 3M10 Star WasherQty: 12 4Right UprightQty: 1 5Bridge AssemblyQty: 1 6ConsoleQty: 1 7M10 X 25MM Socket Head Cap ScrewQty: 4 8Bridge CoverQty: 1 9#10 X 1/2 Phillips ScrewQty: 2 10#6 X 3/8 Phillips ScrewQty: 4 11CupQty: 2 12Accessory TrayQty: 1 M10 X 25MM BOLT (#2) M10 STAR WASHER (#3) #10 X 1/2” PHILLIPS SCREW (#9) #6 x 3/8” PHILLIPS SCREW (#10) M10 X 25MM...
Page 14
12 1 2 A A A
Page 15
13 3 4 1 L2 3 1 2 3 8x8x 4 R L Finger ziehen Sie die Schrauben fest.
Page 16
14 5 6 1 4 52 3 S ich erst elle n , d ass alle B efe stig un g st eile f e stg ezo gen si nd Nicht einklemmen keine Kabel.
Page 17
15 7 8 74x 6
Page 18
16 9 1089 10 4x 2x Tuck any excess cable inside console. DO NOT PINCH ANY WIRES!
Page 19
17 11 12 1112 C C 100
Page 20
![Page 20
18
3.3 caLIbratIon
Before using your treadmill please follow the calibration instructions b\
elow. Please stand to the side of your treadmill
during calibration.
1. Turn treadmill on, or if on press the RESET key.
2. The console will display “PLEASE WAIT” or “WAIT”.
3. When “PLEASE WAIT” or “WAIT” disappears and the screen is blank press and hold the PAUSE key until
“DIAGNOSTICS” appears. Once ”DIAGNOSTICS” appears, press ENTER.
4. Use the arrow keys to scroll through the diagnostics menu to...](http://img.usermanuals.tech/thumb/2918/103897/w300_t5-5-manual-1515508261_d-19.png "Page 20
18
3.3 caLIbratIon
Before using your treadmill please follow the calibration instructions b\
elow. Please stand to the side of your treadmill
during calibration.
1. Turn treadmill on, or if on press the RESET key.
2. The console will display “PLEASE WAIT” or “WAIT”.
3. When “PLEASE WAIT” or “WAIT” disappears and the screen is blank press and hold the PAUSE key until
“DIAGNOSTICS” appears. Once ”DIAGNOSTICS” appears, press ENTER.
4. Use the arrow keys to scroll through the diagnostics menu to...")
18 3.3 caLIbratIon Before using your treadmill please follow the calibration instructions b\ elow. Please stand to the side of your treadmill during calibration. 1. Turn treadmill on, or if on press the RESET key. 2. The console will display “PLEASE WAIT” or “WAIT”. 3. When “PLEASE WAIT” or “WAIT” disappears and the screen is blank press and hold the PAUSE key until “DIAGNOSTICS” appears. Once ”DIAGNOSTICS” appears, press ENTER. 4. Use the arrow keys to scroll through the diagnostics menu to...
All Life Fitness manuals