Linksys WRT AC3200 User Manual

1 
 
   
 
 
 
 
 
 
 
 
 
User Guide 
 
WRT3200ACM 
MU- MIMO  
Gigabit Wi- Fi Router 
 
 
 
  

2 
 
Contents  
Product Overview  ........................................................................\
........................... 3 
Front view  ........................................................................\
........................................................................... 3  
Back view  ........................................................................\
............................................................................ 5  
Avoid Overheating...

3 
 
Product Overview   
Front view 
   

4 
 
Front panel  
 
(1) Power i ndicator —(White)  The icon LED is solid white while the router is powered on. It will blink 
when the router goes through its self -diagnostic mode during every boot -up.  
(2)  Internet  Indicator —(White/Amber) The Internet LED is solid white when connected to the 
Internet. It blinks white while the router works to establish a connection. A solid amber LED 
indicates the connection is down due to configuration issues. Amber blinking indicates that the 
conn ection is...

5 
 
(9)  ETHERNET 1  through  4 (Primary)—(White) These numbered LEDs correspond with the 
numbered ports on the router’s back panel. If the white LED is solid, the router is connected to a 
device through that port. A flashing white LED indicates network activity ov er that port. 
(10)  ETHERNET 1  through  4 (Secondary) —(White) If the white LED is off, the router is 
successfully connected to a device through that port at 10/100 Mbps. A solid white LED 
indicates that the router is successfully...

6 
(3) 
Ethernet ports —
 Connect Ethernet cables to these blue gigabit (10/100/1000) ports, and to 
wired devices on your network.  
Note —
For best performance, use CAT5e or higher rated cables on the Ethernet ports.  
(4)  Internet port —Connect an Ethernet cable to this yellow gigabit (10/100/1000) port, and to a 
broadband Internet cable/DSL or fiber modem.  
Note —
For best performance, use CAT5e or higher rated cables on the Internet port.
 
(5) USB 3.0 port—C onnect and share a USB drive on your...

7 
 
Avoid Overheating  
 
Wall-Mounting Placement  
The router has wall-mount slots on the bottom of each foot for flexibility in mounting  the router on 
the wall. The distance between the slots on the short side is 104 mm. The  distance between the 
slots on the longer side is 210 mm. Two screws are needed to  mount the router.  
 
Note—Linksys  is not responsible for damages incurred by unsecured wall -mounting hardware.  
Mounting Instructions  
1. 
Determine where you want to mount the router and...

8 
 
2.  
Before drilling holes, choose the template (short side or long side) that fits your 
installation. Drill the holes using the correct template.  
3.  
Insert a screw into each hole and leave 4 mm of its head exposed.  
4.  
Position t he router so the wall -mount slots line up with the two screws.  
5.  
Place the wall -mount slots over the screws and slide the router down until the screws fit 
snugly into the wall -mount slots.   

9 
 
Wall- Mounting Template  
Print this page at 100% size.  
P lace on the wal l with desired router position and mark screw locations. 
  
  

10 
 
Setting Up: Basics 
Where to find more help  
In addition to this user guide, you can find help at these locations:  
•  
Linksys.com/support/ WRT3200ACM (documentation, downloads, FAQs, technical 
support, live chat, forums)  
•  
Linksys Smart Wi -Fi help (connect to Linksys Smart Wi -Fi, then click Help at the top of the 
screen)  
 
Note—Licenses and notices for third party software used in this product may be vie wed on 
http://support.linksys.com/en -us/license. Please contact...