Loewe Art 47 Sl Operating Instructions

11 -
For your safety
Energy consumption
Your TV set is equipped with an eco-standby power supply. In the standby 
mode, the power consumption drops to low power (see Technical data on 
page 71). If you want to save even more energy then switch the device 
off with the mains switch. However note that in this case, EPG (Electronic 
Programme Guide) data will be lost, and it may be that programmed 
timer recordings cannot be executed via the TV device.
The power consumed by the TV set in operation depends...

- 12
Installing the TV set
First plan the installation solution for your TV set. See the installation 
instructions of the enclosed table mount for this.
See accessories (page 72) for other installation options.
Preparing the remote control unit
Inserting or replacing batteries
Press the embossed arrow and push down the 
battery compartment cover.
Insert two alkaline manganese LR 03 (AAA) batteries; 
ensure that the + and – poles are correctly positioned!
Slide the cover up from below.
Adjusting the...

13 -
Turning the set on/off
Switching the TV set to standby mode
Activate the mains switch on the bottom of the set.
The display in the control panel on the front of the set 
will be illuminated red, the set is now in standby mode.
Switching the TV on/off on the control unit
Press the on/off button in the middle for about 2 seconds 
to switch the TV set on/off.
Meaning of the display colour:
Red:   Standby mode
Green:  TV set is switched on
Orange:  Radio mode, TV set receives EPG data or timer...

- 14
For TV sets with MHEG-5 software the stations are tied 
to “Logical Channel Numbers” – “LCN” and sorted from 
1-799. Digital stations without “LCN” are stored from 
800 onwards. Analogue stations are stored from 1001. 
You can state whether coded stations are to be searched 
for in the search/update. 
Select yes to save all found 
scrambled stations. However, these stations can only 
be received in connection with a CA module and the 
appropriate Smart Card.
 Handling of the CA module is 
described...

15 -
Positioning/aligning the DVB-T antenna
If you receive one or more DVB-T stations with picture or sound interfer-
ence, you should change the position and alignment of the antenna. Ask 
your dealer to tell you which channels are used to broadcast the DVB-T 
stations in your region.
➠  In normal TV mode, without other displays.
 A DVB-T station is received and selected. 
Call TV menu.
  Select Settings,
 go to the menu line below.
  Select Stations,
 go to the menu line below.
  Select...

- 16
Operating convenience
The info display
The info display shows a content-based info text for each menu item at 
the top edge of the screen to aid you in making the settings. In conjunc-
tion with the index it makes a convenient control system.
➠ A menu is displayed.
The factory setting is that the info display is shown auto-
matically for each menu item. In this case you can tempo-
rarily hide the info texts with the INFO button.
The automatic info display can be hidden via a menu 
setting. Then it...

17 -
Operating convenience
The index in the TV set
You can start all wizards and many operating functions directly from 
this point. The complete function scope of the TV set can thus be easily 
understood.
Alphabetic sorting is preceded by the items Language, Energy efficiency, 
Integrated features and Repeat initial installation.
Call index
➠ In normal TV mode, without other displays.
Call Index.
You will see an info text for the highlighted keyword in 
the info display. If MHEG-5 is active, call the...

- 18
Settings
TV menu
Picture SoundConnections Recording
Recording wizard
Timer list
Pre-record time
Post record timeNew devices/modifications
Sound components
Antenna DVB
Digital Link Plus
Miscellaneous Picture adjustment
Contrast
Colour intensity
Colour temperature
Brightness
Sharpness
Digital Noise Control (DNC)
more...
Image+ 
Active
Picture format
Move picture up/down
 (1
Auto format
Film quality improvement (DMM)
Automatic dimmer
Search wizard
Manual adjustment
Change stations
Select/change...

19 -
Radio menu
SoundStations
Timer functions
Search wizard
Manual adjustment
Change stations
Select/change favouritesSwitch off today only
Switch off daily
One-time reminder
Wake up Mon-Fri
Wake up Sat
Wake up Sun
Wake up with
Wake up signal volume
Switch on TV when marked
off
on (only for DVB)
on (for DVB + analogue)
Select provider (1
Station selection
Data capture
no
yes
EPG menuTeletext menu
Preview pages
Sub-title pages
Personal text pages
Character set
HiText
Page format
Station selection...

- 20
Select station
With the keys P+ and P - on the remote control
P+/P– Station up/down.
The station display with sound identification is displayed 
briefly.
➠  If favourites are selected, the station in the favourites list 
is switched over with P+/P– (see page 21).
➠  If other languages or DVB subtitles are available on DVB 
stations, the language and subtitle selection is displayed 
under the station display. 
  See also 27: Additional selection possibilities for DVB 
stations.
With the numeric keys...