Loewe Connect 32 Led Operating Instructions

Operating instructions
–  Connect 42 Full-HD+
 100
–  Connect 37 Full-HD+
 100
–  Connect 32 Full-HD+
 100
TV
Connectivity
233–33837.021
 

Please fold out this page.
Contents
Remote control – TV functions ................................................................ 3
Control unit front side of the device ....................................................... 4
Connections rear side of the device – Connect 32 .................................. 5
Connections rear side of the device – Connect 37 / Connect 42 ............. 6
Welcome ................................................................................................... 7
Scope...

3 -
Remote control – TV functions
(1   Radio only for DVB reception, provided the station broadcasts 
this. Otherwise switch-over to an audio input.
(2  When equipped with Digital Recorder, these buttons have 
different functions, see Digital Recorder user guide.
Switch on /
switch off to standby mode ..................................... (page 12)
Switch over to radio mode
 (1 ..............................(page  12,  36)
Switch over to operate DVD player .......................... (page 64)
Audio...

- 4
Control unit front side of the device
(1  Radio only for DVB reception, provided the station broadcasts this.
 Otherwise switch over to an audio input.
(2 Only in sets with integrated Digital Recorder.(3 Only in sets with Network Mediaplayer (see operating manual Network Mediaplayer).
C    O    N    N    E    C    TConnectivityC
DR+
Button +:
Station up
in the menu: to the right On/Off button:
Switch on from the standby mode
Switch off to the standby mode
Button – :
Station down
in the menu: to the...

5 -
ANT OUT (1
Connect antenna
output with ANT-TV
(tuner 1)
A N T-T V
Antenna/cable
analogue/digital
(Tuner 1)mains switch
CONTROL 
(1 - rotating stand control (3 
       or IR link (3
RS-232C (1 - serial interface AUDIO IN1 L/R - audio input left/right (analogue) AUDIO OUT L/R - audio output left right (analogue)
ANT SAT2 
(1
Satellite antenna
(Sat tuner 2) ANT2 
(1
Antenna/cable
analogue/digital
(Tuner 2)
AV1
Euro-AV
socket 1AV2 (RGB)
Euro-AV
socket 2 220-240V~ 50/60Hz 
mains connection
SERVICE -...

- 6
ANT OUT (1
Connect antenna
output with ANT-TV
(tuner 1)
A N T-T V
Antenna/cable
analogue/digital
(Tuner 1)mains switch
CONTROL 
(1 - rotating stand control (3 
       or IR link (3
RS-232C (1 - serial interface AUDIO IN1 L/R - audio input left/right (analogue) AUDIO OUT L/R - audio output left right (analogue)
ANT SAT2 
(1
Satellite antenna
(Sat tuner 2) ANT2 
(1
Antenna/cable
analogue/digital
(Tuner 2)
AV1
Euro-AV
socket 1AV2 (RGB)
Euro-AV
socket 2 220-240V~ 50/60Hz
mains connection
SERVICE -...

7 -
Welcome
Thank you!
Loewe sets high standards in technology, design and user friendliness. This 
applies equally for TV, video and accessories.
Your new TV set is equipped for the TV standard "HDTV" 
(High Definition Television). With its high definition 
screen, the 100 Hz image refresh frequency and the 
future-oriented digital interfaces HDMI (High Definition 
Multimedia Interface) it offers possibilities for watching 
HDTV broadcasts in an excellent picture quality. 
HDTV is a worldwide,...

- 8
Welcome
Operating convenience with wizards
This TV set offers user prompting with wizards that take you through the 
settings step-by-step.
You can return to the previous step or exit the wizard at any time.
The wizards in overview
Initial installation
The initial installation wizard helps you with the initial installation and 
connection of any existing equipment (see page 12).
Setting up the antenna
You enter in the antenna wizard which antenna signals are available to 
you. The antenna wizard is...

9 -
For your own safety and to prevent unnecessary damage to your device, 
read and comply with the following safety instructions:
Proper use and environmental conditions
This TV set is intended exclusively for the reception and reproduction of 
video and audio signals and designed for the home and office. It may 
not be used in rooms with high humidity (e.g. bathrooms, saunas) or 
high dust concentration (e.g. workshops). The manufacturer‘s warranty is 
only valid for use in the specified permissible...

- 10
For your safety
Energy consumption
Your TV set is equipped with an eco-standby power supply. In the standby 
mode, the power consumption drops to low power (see Technical data on 
page 68). If you want to save even more energy then switch the device 
off with the mains switch. However note that in this case, EPG (Electronic 
Programme Guide) data will be lost, and it may be that programmed 
timer recordings cannot be executed via the TV device.
The power consumed by the TV set in operation depends...