Loewe Modus L42 Plasma Operating Instructions

11 -
First installation
Remote control
Batteries
To insert or change the batteries, press on the arrow. Slide the battery compart-
ment cover downwards and remove it. Insert LR 03 alkaline-manganese batteries 
(AAA) and ensure that the + and - ends are positioned correctly.
Then push the cover back on from the bottom.
Note on disposing batteries:
The batteries provided contain no harmful materials such as 
cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries 
may no...

- 12
First installation
If the reception conditions are good, then a room antenna may be used for DVB-T. 
Passive and active room antennas are available on the market. The power is sup-
plied for an active antenna via the antenna connection. For automatic programming 
or in “TV Menu – Connections – Antenna DVB – Antenna DVB-T,“ the distribution 
voltage (5 volts) is to be set correspondingly.
It may be practical to use a nondirectional antenna. If the location is outside the 
normal transmitting range,...

13 -
First installation
Automatic programming
Automatic programming of the TV set is started the first time you switch it on. Follow 
the menus.
Settings can be selected by pressing one of the directions ...
... and confirm your settings by pressing OK. You then go to the 
next menu. 
Back to the previous menu.
1.  First you have to select the menu language. 
2.  By pressing the OK button, you can call the menu “Connect antenna cable(s)“. If 
you want to receive digital stations via satellite, then...

- 14
First installation
Directing DVB-T antenna
Note: not with DVB-T stations in UK.
If you use a room antenna to receive one or more DVB-T stations that have picture 
and sound interference, then you should change the location of where the antenna 
is set up. To help you direct your antenna or to help you determine the most suitable 
location to set up the antenna, your TV set has a display for the signal quality C/N 
and the signal strength Level.
Consult your specialist dealer to find out which...

15 -
Daily operation
Changing stations
... with the P+/P- buttons on the remote control
        Stations up/down
When changing, the station display is visible for a few seconds.
If additional languages are broadcast with DVB stations, then the set displays 
the language/sound selection under the station display. Call the language/sound 
selection by using the green coloured key and select using .
... with the numeric buttons of the remote control
The set has a dynamic memory with 1680 station memory...

- 16
Daily operation
Set the bass tones by using .
If you want to make other sound settings, move up with  to 
“Bass“ and select with , e.g. “more...“. You can also move up 
further to “Sound“ by using  and select other settings in the TV 
menu (such as picture settings).
Use OK to call additional sound settings. 
Select the sound setting using , e.g. “Auto volume“ 
and ...
... use  to select the auto volume option. 
Use  to select “on“ and activate the auto volume.
Press the END button to...

17 -
Daily operation
For the info system ...
For each menu point, an info text is displayed at the top of the picture to help you 
with the setting. This saves you from having to refer back to the operating instruc-
tions. We shall demonstrate this using the station search option as an example:
Call the TV menu.
Select “Settings“.
In this example, you can see the options available after “Settings“. 
If you want to search for new stations, for example, use  to 
select “Stations“ in the line below. 
The...

- 18
Daily operation
For the index ...
Using the index, you can access many operational functions directly. You can also 
find a great deal of information on technical terms about television. Before the 
alphabetical sorting, you can find the menu language option, the DRM mode 
for reducing screen burn-ins (only for TV sets with a plasma screen), the list of 
features integrated into the TV set and the repeat initial installation option. 
Call the index in the TV mode (without any other on-screen...

19 -
Setting the sound
Volume and other frequently used sound settings
Setting the volume
by using  or OK, you can call other sound settings ... 
and select using  ...
use  for the related selection/setting...
... and use  to make the selection/setting there.
Sound adjustment allows you to adjust the sound characteristics to the station‘s 
sound. The Sound effects settings allow you to expand a Dolby Pro Logic Signal to 
a virtual surround signal by using “Dolby Virtual“; by using “Panorama“, you...