Loewe Spheros R26 Lcd Operating Instructions

21 -  
Operating modes – TV
Call additional functions
Select additional functions such as Image+ ✳, Teletext 
subtitles, Personal teletext pages, Headphone volume, Scan 
stations and to move the picture up and down.
Call timer overview
If timer recordings have been programmed, you will see when 
which station is recorded here.
Select picture format
The TV set sets the best picture format automatically when 
Auto format is switched on. If you want to set a different 
format, press this button until the...

 - 22
DVB character set
 • Western European     • Polish     • Standard.
Rotate TV
For Spheros R 32/37, it is possible to rotate the TV set on a Loewe rotating 
stand. You can fi nd out more on page 41.
DVB subtitles
If the station provides DVB subtitles, then you can have the TV display them 
permanently or suppress their display. You can also select between subtitles for 
translation or for the Hearing Impaired.
1.  Call the TV menu via the MENU button.
2.  Select the Settings line and confi rm using...

23 -  
Operating modes – TV
Removing the CA module
1.  Switch the TV set off with the mains switch.
2.  Remove the cover from the back of the set 
on the upper left. 
3.  Press the eject button at the module slot; 
the module is unlocked.
4.  Remove the module from the set.
Inserting a new CA module
After you insert a new CA module (CI module (1 is 
displayed in the menu) and switch the TV set on, 
the following dialogue is displayed:
After you press the OK button, the system starts the wizard to carry...

 - 24
Operating modes – TV
Image+ demo mode
In order to show the way Image+ works, a Demo mode is integrated. 
In Demo mode, the current picture is divided into two parts. The left half of 
the picture is shown in normal mode, the right half in the Image+ optimised 
mode.
The demo mode can be closed by pressing on any button on the remote control.
Image+
Image+ is a picture improvement specially developed by Loewe, which delivers 
a sharper, lifelike and colour-fast picture richer in detail and contrast....

25 -  
Picture in picture (PIP)
Note: The coloured keys do not work as described below with DVB-T stations in 
GB, but they operate as described on page 30 (Digital Teletext).
Picture in picture displays are possible if the set has an analogue PIP tuner or a 
digital satellite tuner in addition to the analogue TV cable tuner. You can have 
a PIP tuner or a digital satellite tuner retrofi tted. Set-specifi c equipment and 
retrofi tting options for PIP and satellite tuners, see pages 46 and 47.
If there is...

 - 26
Operating modes – PIP
Functions in the PIP menu
In the PIP menu, you can set the PIP type (small picture or split screen) and the 
position of the small picture.
Call the PIP menu (PIP must be active, green bar/frame)
Setting the PIP type
You can have the PIP picture displayed as a small PIP or split screen. 
Switch to small PIP:
Select Type and then Small PIP
For the small PIP, you will see a coloured frame around the PIP picture.
Position of the PIP picture
Move the PIP picture with the arrow...

27 -  
Operating modes – EPG
When receiving digital terrestrial and digital satellite stations, you may fi nd that 
two identical EPG data are displayed in the EPG (DVB) menu for one station. 
If you call the EPG menu in the EPG mode by using the MENU button, then 
select Station selection, you can select the duplicate station and deactivate it 
by using OK).
You have direct access to the selection lines above to pre-select the day, the 
time, the station and the topic.
Blue coloured key: Call Select...

 - 28
Operating modes – EPG
In front of the programme’s title, the system places an ✓ 
. This station is 
switched later to this programme when the set is switched on. If the TV is off, 
it switches on again automatically at the beginning of the marked programme 
if this has been set in the EPG menu. If you are out, a security prompt prevents 
the TV set staying on unattended.
Before leaving the upper selection lines using the blue coloured key, select a 
specifi c line. If you have switched back to the...

29 -  
In Multiple pages scroll using . You can see which 
multiples pages can be called in the bottom menu line.
Call contents page 100
Call the TOP table 
The TOP table is a general list of teletext. You can only call the 
table for stations that use the TOP operating system.
Use  to select the topic group. 
Select the topic column using . 
Select the topic with  and display page with OK.
Enter the page number directly
Displaying teletext pages
Stop self-turning pages (HOLD)
Zoom page: top part...

 - 30
Operating modes – Teletext
Programme timer recordings
A video and/or DVD recorder must be connected and logged in in the connec-
tion wizard. Call the programme pages of the current station in teletext mode 
using the Direct recording button 
. Scroll to the teletext page in which 
the programme to be recorded is listed if necessary. Select the programme you 
want to record by with  and confi rm with the OK button. For Timer data, 
select the VCR or DVD recorder and whether you want to record once...