Loewe Xelos A 42 Plasma Tv Operating Instructions

31 -
Operating modes – Radio
Radio
You can only receive radio stations via DVB. If you do not have any DVB radio 
reception, you can play a sound signal from an external device using the TV set via 
the sound/AV inputs.
Use the RADIO button on the remote control or the R on the 
control ring of the TV set to switch the radio on or off.
You can see a station list of the radio stations or with DVB-T in UK the station 
logo. In this case you can call up the station list by using the OK or INFO key. 
Station...

- 32
Operating additional equipment
Search for and store the station of the video recorder (if no Euro-AV 
cable is available)
Switch on the test station on the VCR or insert a recorded tape and start playback. 
In some video recorders the station must be switched on by activating the modu-
lator.
Then call the AV selection on the TV set with 0 AV. Select the menu item “VIDEO“ 
in the AV selection and call using OK.
To prevent “normal“ TV stations being found in the search, pull out the antenna 
plug...

33 -
Operating additional equipment
Timer recording with video or DVD recorder
You can programme timer recordings on the TV set. Programming can be done 
with the EPG programme guide (not with DVB-T in UK), teletext or manually. Call 
the “Timer list“ menu with the 
  button and press the red coloured key for the 
“Recording wizard“. Select whether you want to programme the recording via 
EPG, teletext or manually. You also have the option to programme recordings 
directly from the EPG programme guide or...

- 34
Operating additional equipment
Audio output “AUDIO DIGITAL OUT“
The digital audio signal is applied at the “AUDIO DIGITAL OUT“ socket of the TV. 
For example, you can connect an external digital audio amplifier or the Loewe 
Auro system here.
An analogue audio signal from the TV set or another sound source which is recei-
ved at one of the Euro-AV sockets of the TV set is converted into a digital signal 
(PCM) and output at the “AUDIO DIGITAL OUT“ socket. Conversion from external 
analogue AV...

35 -
Operating additional equipment
Connecting Loewe DVD Preceiver Auro 2216 
PS and Individual Sound loudspeaker system
You can play audio signals from the TV or DVD player in cinema quality with these 
components. In addition to the subwoofer illustrated below the Individual Sound 
system includes up to 5 loudspeakers for the front , center and surround reproduc-
tion. The centre signal can be reproduced alternatively by the TV speakers.
Connect the cubic socket on the DVD Preceiver to the “Master“...

- 36
Operating additional equipment
Connecting other audio amplifiers or active 
speakers
In the connection wizard, select “HiFi/AV amplifier“ under “Equipment selection: 
audio component“. The connection wizard allows configuration of different 
audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with 
different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the 
operating instructions for the audio amplifier to be connected.
Select “Digital“ under “Audio...

37 -
Operating additional equipment
HDMI (DVI) connection
The HDMI connection (High Definition Multimedia Interface) allows 
digital picture and sound transmission via a connecting cable, e.g. 
from Loewe DVD Recorder Centros 2102/2172 HD. The digital 
picture and sound data are transmitted without data compression 
and therefore lose none of their quality. In the equipment connected, no analogue/
digital conversion is necessary, which might also have lead to losses in quality.
DVI signals can be also be...

- 38
Operating additional equipment
Sound from PC or Set Top Box
Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN 
L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifier, you can select the digital 
audio signal in the connection wizard (TV menu - Connections - New devices/mo-
difications) and assign it to the VGA/XGA socket. You can make the other settings 
for the audio amplifier as described...

39 -
Operating additional equipment
Set remote control
The specified key combination must be pressed (approx. 5 s) until one of the LEDs  
flashes twice. The remote control can be set for the different devices as follows:
Device    Hot keys
Loewe TV (Chassis L2650) 
 +  

- 40
What to do, if ...
Problem
The “Recording“ menu point is not displayed in the 
TV menu.
“Connections“ cannot be called in the TV menu 
(deactivated)
The control of the Loewe video recorder and the 
timer do not work or do not work properly.
General problems with connecting external equip-
ment via an AV input
A decoder connection does not function or is faulty.
All menus appear in the wrong language.Possible cause
No video or DVD recorder logged in
A time recording is in progress
a)  The Digital...