Loewe Xelos A 42 Plasma Tv Operating Instructions

							21 -
Operating modes – TV
Calling additional functions
Select additional functions such as Image+✳, Teletext subtitles, 
Personal teletext pages, Headphone volume, Scan stations and 
to move the picture up and down.
Call timer overview
If timer recordings have been programmed, you will see when 
which station is recorded here.
Select picture format
The TV set sets the best picture format automatically when Auto 
format is switched on. If you want to set a different format, 
press this button until the desired format is selected or select the 
format with .
In sets with an LCD screen, you can switch the panorama picture over to distorti-
on-free representation. Dark margins are then visible on the left and right of the 
picture. 
Switching over: Keep the M button on the set pressed, at the same time press the 
”Picture format” 
  button on the remote control briefly.
Resetting: Press the same button combination again. 
Move picture up/down
To make picture subtitles visible, you can use  to move 
the picture up or down with the picture formats “Panorama“, 
“Cinema“ and “Zoom“.
Note: for DVB-T stations in UK you can switch back and forth quickly between two 
stations using this button
TV menu
Call up the TV menu
You will find a description of the picture and sound settings on page 19. The TV 
menu offers other options for recording, connections and settings of the TV set.For a recorder that is logged in, you can find the following menus in the 
“Recording“:
Recording wizard - to programme new timer recordings
• Via EPG      • Via teletext (VPT)      • Manually
You will find further information about timer recording on page 33.
Timer list
Here you will find a list of programmes programmed for recording. You can 
change the recording data or delete programmed recordings and programme new 
recordings.
Pre-record time and Post record time
For recordings without VPS/PDC, set a lead and lag time here so that the pro-
gramme is fully recorded despite any slight differences in the time. 
Under “Connections“ you will find the following functions:
New devices/modifications (connection wizard)
The connection wizard helps you connect and log in additional equipment such 
as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV 
decoders, equipment with component signals and digital HDMI/DVI signals.
Antenna DVB
• Antenna DVB-T     • Antenna DVB-S
✳
You can find more information on pages 13 and 14.
Digital Link Plus
Transmission of the station data from the TV set to the video/DVD recorder if a 
recorder with Digital Link Plus is connected.
Miscellaneous (connections)
•  Set AV norm for the connections manually (if it is not recognised automatical-
ly).
•  “Assign audio digital signals“ to one of the AV sockets.
•  “Allow switching voltage“ to display the signals of the connected device imme-
diately on the screen via Euro AV during playback.
•   RGB insertions at AV2 to play back RGB signals at all station storage locations.
•  Select decoder stations and set sound encoding.
Under “Settings“ you will find the following functions:
Stations
Here you can search for and store new stations automatically or manually. With 
“Change stations“, you can rearrange and delete the stations and change station 
names (not for DVB-T stations in UK).
• Search wizard     • Manual adjustment     • Change stations
Zoom
Cinema Panorama 16:9Picture format
4:3
END
Timer list      Fri 12.09./14:1212.09.  18:00-18:30  3SAT   Die Köchin, die Putzfrau und d
Detail    New recording     Change
DeleteTEXTINFO
Picture adjustment        ...
INFOENDSettingsConnectionsRecordingSound TV menuPicture
Teletext subtitlesPersonal teletext pagesHeadphone volumeAdditional functionsOKINFOEND
BA32789_021XelosModusRel_5_GB.in21   21BA32789_021XelosModusRel_5_GB.in21   2115.01.2007   16:55:2815.01.2007   16:55:28
 
						

							- 22
DVB subtitles
If the station provides DVB subtitles, then you can have the TV display them 
permanently or suppress their display. You can also select between subtitles “for 
translation“ or “for impaired hearing“.
1.  Call the “TV menu“ via the MENU button.
2.  Select the “Settings“ line and confirm using OK.
3.  Select the “Miscellaneous“ line and confirm using OK.
4.  Select the “DVB subtitles“ line and confirm using OK.
Note: If you have selected “Subtitles off“, then the set generates an on-screen 
display when subtitles are available.
By using the END button, you can open the status display and you can display the 
subtitles again by using the TEXT button.
•  Call the status display by pressing the END button, if it is not yet displayed.
•  When the status display is visible, press the TEXT button. 
Select the desired language and confirm using OK. The presetting changes for 
the current programme.
•  Which subtitle languages can be selected depends on the provider.
•  The automatic shortlist is determined by the menu language and the selection 
made in the “DVB subtitles“ settings menu.
•  By pressing the END button, you can hide the menu again.
Note: DVB subtitles are not available when digital teletext is being displayed.
Operating modes – TV
Parental lock
You can lock the TV from “immediatly“, “daily“ for a certain period of time or 
“agerelated“ for DVB programmes with age restrictions.
Here, you determine the PIN to enter if you want to watch locked programmes.
Timer functions
You can have your TV switch off at pre-programmed times or wake you/remind you 
with radio or TV. If you are not present at the time, a safety prompt makes sure the 
TV switches off again after 5 minutes.
• Switch off today only     • Switch off daily     • One-time reminder
• Wake up Mon-Fri     • Wake up Sat     • Wake up Sun     
• Wake up with 
✳  • Wake up signal volume
Language
If “your“ menu language is not set, you have to select the “Language“ menu in a 
language that you do not understand. Therefore here is a simple way to set the 
right menu language: 
1. Press the INFO button (index), select the first listing (this is above A).
2.  Call the language selection by pressing the OK button.
3.  Now select the desired language and confirm it by pressing the OK key.
4.  Hide the menu again with the END button.
Miscellaneous (settings)
On-screen displays
You can set the duration and position of the station and status display, define the 
content of the status display and switch the automatic info texts on or off:
• On-screen display position    • On-screen display time     • Programme title   • 
Sound mode     • Time     • Alarm time     • Sleep timer    • Automatic info
Time and date
If you receive teletext, the set registers the time and date. These are required for 
timer recordings, timer functions and EPG. If you do not receive teletext, then you 
have to enter the date and time; you should not switch off the set using the mains 
switch since the settings will then be lost.
DVB software
Update of DVB software via satellite 
✳.
DVB subtitles
• Subtitles off     • Subtitles for the Hearing Impaired
• Subtitles as translation for foreign language programmes
DVB character set
• Western European     • Polish     • Standard.
✳ Only for sets with DVB-S
END
INFO
Subtitles off
for impaired hearing
for translationDVB subtitlesOK
BA32789_021XelosModusRel_5_GB.in22   22BA32789_021XelosModusRel_5_GB.in22   2215.01.2007   16:55:3215.01.2007   16:55:32
 
						

							23 -
Operating modes – TV
Removing the CA module
1.  Switch the TV set off with the mains switch.
2.  Remove the cover from the back of the set 
on the upper left. 
3.  Press the eject button at the module slot; 
the module is unlocked.
4.  Remove the module from the set.
Inserting a new CA module
After you insert a new CA module (CI module 
(1 is 
displayed in the menu) and switch the TV set on, the 
following dialogue is displayed:
After you press the OK button, the system starts the wizard to carry out the auto-
matic station search.
Check the proposed search parameters and let the set search for new stations.
Calling the CA module menu
Here you can call up information on the inserted conditional access module and 
the smart card. To do this, use the MENU button to call the TV menu, select the 
line “Settings“, “Miscellaneous“ and then the entry “CI module - xxx“ (in place of 
“xxx“ stands the name of the provider which is output by the smart card. The term 
CI module 
(1 displayed in the menu refers to the CA module. The content of this 
menu depends on the particular supplier of the CA module.
Note: This menu is only available for digital stations.
Installing new DVB software
To ensure your DVB-S receiver is always performing at the state of the art, newly 
developed software versions are made available from time to time; these are 
broadcast via satellite and can be automatically installed on your set (only possible 
via ASTRA1).
Software is recognised automatically
The set can determine whether a new software version is available. This occurs at 
night when your EPG is automatically updated. For this, your TV set has to remain 
in the standby mode (do not switch off using the on/off button on the set).
If a new software version has been found, the set will indicate this with an on-
screen message the next time the set is switched on: You can decide whether or 
not you want to download the new software.
Confirm using OK, so that the new software can be loaded and installed via 
satellite. Continue as set out in the “Downloading software“ section
Autom. station search
Your TV set has detected a new CI module. This requires a station 
search for all new receivable stations.
CA moduleCI-Slot
Searching for new software
If you want to carry out a manual search for new software, proceed as follows:
Call the TV menu using the MENU button.
Confirm the “Settings“ using OK.
Confirm the “Miscellaneous“ using OK.
Select “DVB software“ and press OK.
If you start the search using OK, the set checks if there is a new software 
version available.
If there is a new version available, the set generates an on-screen message.
Downloading software
If you press OK in the dialogue above, you can decide whether you want to 
download the new software immediately, when you switch off the set or not at 
all. We recommend you always carry out the update of the digital software. This 
is the only way to ensure your set is always up to date.
If you do decide to update, the software is initialised on your set and you are 
informed of the status with a grey bar.
Do not switch your set off during this time. This process may take up 
to one hour. You will be informed when the process is completed.
After the software is updated, you will be asked to switch your TV set off and 
back on again using the on/standby switch.
If the update was not carried out, you will be asked several times when you switch 
on the set whether you want to carry out this update.
(1 CA module has established itself as the usual market name. 
    This cannot be taken into consideration in the menu yet. 1.
2.
3.
4.
5.
6.
1.
2.
3.
Update digital TV software
Current version: V3.x.x
You can search for a new software version with OK.
Update digital TV software
Current version: V3.x.x
New version: V3.1.0
BA32789_021XelosModusRel_5_GB.in23   23BA32789_021XelosModusRel_5_GB.in23   2315.01.2007   16:55:3315.01.2007   16:55:33
 
						

							- 24
Operating modes – TV
Image+
Image+ is a picture improvement specially developed by Loewe, which delivers a 
sharper, lifelike and colour-fast picture richer in detail and contrast. 
Image+ is not integrated in the Xelos A26/32 sets.
Image+ menu
Call the menu “Additional functions“.
Use to move to the corresponding selection/setting....
and use  to select/set and use....
to activate.
In the Image+ menu, the functions Image+ “on“, “off“ and “Demo“ can be set.
The Image+ settings can also be opened via the TV menu – “Picture“.
Call up TV menu.
Use to mark Picture.
Use  for associated selection and mark more… with 
.
Call up more… with OK and mark Image+ with .
Use  to access the associated selection. 
Set as described in the Image+ menu above.
The standard setting at delivery of the set is Image+ “on“.Image+ demo mode
In order to show the way Image+ works, a “Demo mode“ is integrated.
In “Demo mode“, the current picture is divided into two parts. The left half of the 
picture is shown in “normal“ mode, the right half in the Image+ optimised mode.
The demo mode can be closed by pressing on any button on the remote control.
Image+Teletext subtitlesPersonal teletext pages Additional functionsoff                       ...
INFOEND
Image+DemoonINFOENDAdditional functions
offOKActivateOK
Image+DemoINFOENDAdditional functions
off on
Image+ off
Image+ on
Picture adjustment        ...
INFOENDSettingsConnectionsRecordingSound TV menuPicture
INFO END PictureTV menuPicture adjustmentColour Brig
Contrastrpnessmore ...OK
INFO END Picture
on              ...  TV menuPicture formatMove picture up/downrpnessAuto formaImage+
BA32789_021XelosModusRel_5_GB.in24   24BA32789_021XelosModusRel_5_GB.in24   2415.01.2007   16:55:3415.01.2007   16:55:34
 
						

							25 -
Picture in picture (PIP)
Note: The coloured keys do not work as described below with DVB-T stations in 
UK, but they operate as described on page 30 (Digital Teletext).
Picture in picture displays are possible if the set has an analogue PIP tuner or a di-
gital satellite tuner in addition to the analogue TV cable tuner. You can have a PIP 
tuner or a digital satellite tuner retrofitted. Set-specific equipment and retrofitting 
options for PIP and satellite tuners, see pages 44 and 45.
If there is no other tuner installed, you can use PIP (AV-PIP) when playing a video 
recorder or DVD player.
For a retrofitted PIP tuner, the following PIP displays are possible: Main picture 
analogue – PIP picture analogue, Main picture digital – PIP picture analogue.
The following is not possible: Main picture digital – PIP picture digital, Main 
picture analogue – PIP picture digital.
For “Split screen,“ the PIP picture is displayed on the right side of the screen. Both 
pictures share the screen in two equal halves. For the “Small PIP“ setting, a small 
picture is displayed in the TV picture.
The green bar/frame indicates that the control commands have an effect on the 
PIP picture. The white bar/frame means that the control commands have an effect 
on the main picture. Use the green coloured key to switch between the PIP 
picture and the main picture, for example to change stations. 
The frame or bar between the pictures is green for the time being.
Show/hide PIP picture
PIP picture as freeze picture
The bar/frame has to be green. If not, press the green co-
loured key.
If you press the red coloured key, the PIP picture freezes. Press 
again - moving picture.
Selecting the station of the PIP picture
The bar/frame has to be green. If not, press the green co-
loured key. Then select the station as usual.Select the station of the TV picture (main picture)
The bar/frame has to be white. If not, press the green coloured 
key. Then select the station as usual.
Note: With UK sets, you switch over from the green to the white 
bar/frame by using the PIP key. By pressing on the PIP key once 
more, PIP is switched off.
PIP scan in the PIP picture
The bar/frame has to be green. If not, press the green co-
loured key.
Start scanning the stations using the blue coloured key. The 
bar/frame turns blue. 
The stations now change automatically. Stop scanning the stations by using the 
blue coloured key. The bar/frame turns green again.
Interchanging PIP picture/TV picture
The bar/frame has to be green. If not, press the green co-
loured key.
Interchange the pictures by using the yellow coloured key.
1  ARD  Der Wilde Westen  21:15 – 22:15
41  ZDF  Eifellandschaften  21:00 – 21:451  ARD             Der Wilde Westen                         21:15 – 22:15
41  ZDF  Eifellandschaften  21:00 – 21:45
Operating modes – PIP
BA32789_021XelosModusRel_5_GB.in25   25BA32789_021XelosModusRel_5_GB.in25   2515.01.2007   16:55:3915.01.2007   16:55:39
 
						

							- 26
Operating modes – PIP
Functions in the PIP menu
In the PIP menu, you can set the PIP type (small picture or split screen) and the 
position of the small picture.
Call the PIP menu (PIP must be active, green bar/frame)
Setting the PIP type
You can have the PIP picture displayed as a small PIP or split screen. 
Switch to small PIP:
Select “Type“ and then “Small PIP“
For the small PIP, you will see a coloured frame around the PIP picture.Position of the PIP picture
Move the PIP picture with the arrow keys to a corner of the TV 
picture. In this case, the frame around the PIP picture has to be 
green, and there should not be any other displays visible on the 
screen.
Switch to split screen:
You can have the PIP picture displayed on the right hand side of the screen. Both 
pictures share the screen in two equal halves. You will see a coloured vertical bar 
between the pictures
Call the PIP menu (PIP must be active, green frame)
Select “Type“ and then “Split Screen“.
INFOEND
Split screen
Smmall PIPTypeTV menu
Settings
PIP
INFOEND
Small PIPTypeTV menu
Settings
PIPSplit screen
INFOEND
Split screen
Smmall PIPTypeTV menu
Settings
PIP
BA32789_021XelosModusRel_5_GB.in26   26BA32789_021XelosModusRel_5_GB.in26   2615.01.2007   16:56:0515.01.2007   16:56:05
 
						

							27 -
Operating modes – EPG
When receiving digital terrestrial and digital satellite stations, you may find that 
two identical EPG data are displayed in the “EPG (DVB)“ menu for one station. If 
you call the EPG menu in the EPG mode by using the MENU button, then select 
“Station selection,“ you can select the duplicate station and deactivate it by using 
OK).
You have direct access to the selection lines above to pre-select the day, the time, 
the station and the topic.
Blue coloured key: Call Select date/time/stations/topics
Use  to select the menu line for the date, time, stations or topics. Use  
to select within the menu line.
If, for example, you are looking for the next news, select today’s date, “Soon“ 
under Time, “All“ under Stations and “News“ under Topics.
Then you get a list of all news programmes in the programme list below.
If you want to mark one of these news programmes, return to the programme list 
using the blue coloured key, select the desired news programme by using  
and mark this by using OK.EPG - Programme guide
EPG is an electronic programme guide. With this system, you can easily find the 
programmes that interest you (sorted according to day, time, stations and topics). 
You can mark programmes and programme recordings.
Depending on whether you are receiving analogue stations by cable/antenna or 
digital stations, you will have different programme guides. 
A wizard is activated the first time you use EPG (not with DVB) which guides you 
through the necessary settings. Then run the data capture (see next page).
Using the EPG
Switch EPG on/off
The programme guide menu is divided into two areas: at the top, you can make the 
settings for the programme list (date, ..., topics); on the bottom, the programme list 
is displayed. Use the blue coloured key to switch between the two areas to make 
your selections. 
All programmes currently running are listed initially in the programme list. With the 
 buttons, select the programme you want to watch and switch over with the 
OK button.
Brief information is shown below the programme list for some programmes. If more 
detailed information is available, you can call it using the TEXT button.
Use P+/P– to scroll up or down through the pages of the programme guide. 
In the selection lines for date and time above, you will see the time change when 
scrolling; when you scroll further, the date also changes. 
When the “Time“ line is selected, you can enter the time as of which the pro-
grammes are to be displayed; use the numeric buttons on your remote control to do 
this. Always enter four digits, such as 0900 for 9 a.m.
If programmes are displayed which have not yet started, you can mark these with the 
OK button. The TV set then switches automatically to this station at the given time.
MENUTEXTP+
P–ENDOK
OK
Detail                View               Record   
Page 
						

							- 28
Operating modes – EPG
In front of the programme’s title, the system places an . This station is switched 
later to this programme when the set is switched on. If the TV is off, it switches on 
again automatically at the beginning of the marked programme if this has been 
set in the EPG menu. If you are out, a security prompt prevents the TV set staying 
on unattended.
Before leaving the upper selection lines using the blue coloured key, select a 
specific line. If you have switched back to the programme list, you can change this 
menu line using  without having to leave the programme list.
Programming recording for recorders
The programme marked using the  buttons can be prepared for recording by 
pressing the red coloured key. In the following menu, confirm the timer data or 
change them as required. Then a red dot is set in front of this programme in the 
EPG programme list as an identification (if timer data is being transferred to the 
recorder, no red dot is set). If you select this programme, you can delete it from 
the timer using the red coloured key (if the timer data has been transferred to a 
recorder, the timer has to be deleted there).
EPG menu
Call EPG menu
You will find the following settings in the EPG menu:
• Select provider     • Station selection     • Timer list     • Data capture
• Switch on TV when marked
Selecting providers and stations
If you want to change the provider for analogue TV reception (the station which 
transmits EPG data) to have other stations evaluated, you can do this under 
“Select provider“.
Select “Select provider“ and call this menu using OK. If the station you want to 
switch to is not listed in the “Select provider“ list, then use the yellow coloured 
key to start the automatic search for stations with EPG data. This takes a while.
Or, if you know the station that transmits EPG data, press the blue coloured key 
to compile manually. Select the provider in the station list and adopt it by using 
OK and return to the provider selection using .
Select the provider in “Select provider“ and adopt it using OK. Then a station list 
search is performed. The stations offered by the provider are displayed in a list.First, all stations are marked with the  symbol so that their data is display-
ed in the programme guide (precondition: provided EPG data is broadcast for 
the respective station). Stations indicated by  are analogue terrestrial/cable 
stations, stations indicated by  are DVB-T stations, stations indicated by  are 
DVB-C stations and stations indicated by  are DVB-S stations. These stations are 
available for evaluation in the programme guide.
Select the stations you want to omit from the programme guide one after another 
and deactivate each one by using OK. The  symbol is removed.
Data capture
After these settings or after each time the set is switched off using the mains 
switch, the data must first be collected, before switching on the set. 
To do this, select the station you have defined as a provider and leave the TV 
set switched on for about one hour or switch the set to the standby mode. After 
about two minutes in standby mode, the indicator on the set turns orange. The 
data acquisition begins and lasts about 1 hour. When data acquisition is termi-
nated, the indicator turns red again. The data are also automatically captured 
between 2 a.m. and 5 a.m. when the TV is switched to standby.
A prerequisite for data capture is that “Data capture“ is “on“ (for DVB + analogue) 
in the EPG menu. 
Note: If the TV set is switched off using the mains switch or the mains plug is 
pulled out, all EPG data are lost.
If, for example, you cannot receive any analogue EPG providers or if you only use 
DVB, you should set the data capture to “on (only for DVB)“. 
Switch on TV when marked
You can have the TV switched on automatically from standby at the beginning of 
the marked programme. If you are not present at the time, a safety prompt makes 
sure the TV switches off again after 5 minutes.
INFOENDSwitchData captureStation selectTimer list EPG menuSelect providerOK
BA32789_021XelosModusRel_5_GB.in28   28BA32789_021XelosModusRel_5_GB.in28   2815.01.2007   16:56:1915.01.2007   16:56:19
 
						

							29 -
Operating modes – Teletext
In Multiple pages, scroll using . You can see which multip-
les pages can be called in the bottom menu line.
Call contents page 100
Call the TOP table
The TOP table is a general list of teletext. You can only call the 
table for stations that use the TOP operating system.
Use  to select the topic group. 
Select the topic column using . 
Select the topic with  and display page with OK.
Enter the page number directly
Displaying teletext pages
Stop self-turning pages (HOLD)
Zoom page: top part - bottom part - normal size (press button 
several times)
TV picture on/off (Split Text)Analogue Teletext
Teletext transmits information such as news, weather, sports, programme previews 
and subtitles. 
Teletext on/off
Many stations use the TOP operating system, some use FLOF (e.g. CNN). Your TV 
supports both these systems. The pages are divided into topic groups and topics. 
After switching on the teletext, up to 3,000 pages are stored for Xelos and 1,500 
pages for Modus for fast access. 
Page selection with the coloured keys
The coloured bars (in TOP) or the coloured writing (in FLOF) in the next to the 
last line show you which coloured keys you can use to scroll to topic groups and 
topics.
Red: back to the previously seen page (not in FLOF)
Green: on to the next page (not in FLOF)
Yellow: to the next topic (only in TOP and FLOF)
Blue: to the next topic group (only in TOP and FLOF)
Other page selection options:
Select one page number specified on the page by using 
(Page Catching)
call
  100  100   ARD-Text           10.09.04       14:14:42ARD TEXT
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . .   120
Wird auch der Nahverkehr teurer? . . . . . . . .   121
Australien: Keine Zugeständnisse  . . . . . . . .   122
Tote bei Zugunglück in Schweden . . . . . . . .   532
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .  204
Formel 1: Schumacher erneut vorne . . . . . . .  213
Tagesschau . .  110/112 Kultur. . . . . . . . .   500
Wetter. . . . . . . . . . . 170 Gesellschaft . . . 530
Sport. . . . . . .  200/600 Lotto/Toto . .   666
TV Guide . . . 300/400 Wirtschaft. . . . . .  700
                  Internet: www.ard-text.de
–        +Inhalt     tagesschauPage selection
Index
> 101
Formel 1: Schumacher erneut vorne . . . . . . .213
Tagesschau . .  110/112 Kultur. . . . . . . . .   500
Wetter. . . . . . . . . . .170Gesellschaft . . . 530   
Sport. . . . . . .  200/600 Lotto/Toto . .   666
TV Guide . . . 300/400 Wirtschaft. . . . . .  700
                  Internet: www.ard-text.de
–        +Inhalt   tagesschau
Page selection                 OK   View
Zeitplan       Fußball1  2  3  4  5  6  7  8  9  10  11  12–        +
Bulmahn: Bildung statt Eigenheim . . . . . . . .   120Wird auch der Nahverkehr teurer? . . . . . . . .   121
Australien: Keine Zugeständnisse  . . . . . . . .   122
Tote bei Zugunglück in Schweden . . . . . . . .   532
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .   204
Formel 1: Schumacher erneut vorne . . . . . . . 213
Tagesschau . .  110/112 Kultur. . . . . . . . .   500
Wetter. . . . . . . . . . . 170 Gesellschaft . . . 530   
Sport. . . . . . .  200/600 Lotto/Toto . .   666
TV Guide . . . 300/400 Wirtschaft. . . . . .  700
                  Internet: www.ard-text.de
–        +Inhalt   tagesschau
Seitenauswahl
TOP table
Wetter
Vorhersage
Städte
Regional
Reisen
int. Städte
BiowetterÜbersicht
tagesschau
Wetter
Sport 1
TV Guide
ARD heute
ARD morgen
FS-Sendungen
TV Guide 2
more  . . .
OK
END
ViewOK
  100  100   ARD-Text           10.09.04       14:14:42ARD TEXT
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . .   120
Wird auch der Nahverkehr teurer? . . . . . . . .   121
Australien: Keine Zugeständnisse  . . . . . . . .   122
Tote bei Zugunglück in Schweden . . . . . . . .   532
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .  204
Formel 1: Schumacher erneut vorne . . . . . . .  213
Tagesschau . .  110/112    Kultur. . . . . . . . .  500
Wetter. . . . . . . . . . . 170    Gesellschaft . . .  530
Sport . . . . . . .   200/600    Lotto/Toto . . . .   666
TV Guide . . . .   300/400    Wirtschaft  . . . .  700
                  Internet: www.ard-text.de
–        +InhalttagesschauPage selection
Index
> 101
BA32789_021XelosModusRel_5_GB.in29   29BA32789_021XelosModusRel_5_GB.in29   2915.01.2007   16:56:2115.01.2007   16:56:21
 
						

							- 30
Operating modes – Teletext
Programme timer recordings
A video and/or DVD recorder must be connected and logged in in the connection 
wizard.
Call the programme pages of the current station in teletext mode using the Direct 
recording button 
 . Scroll to the teletext page in which the programme to be recor-
ded is listed if necessary. Select the programme you want to record by with  
and confirm with the OK button. For “Timer data,“ select the VCR or DVD recorder 
and whether you want to record once or a series of times. Confirm with OK. 
Teletext menu
Display teletext menu
Here you will find functions such as
•  “Newsflash“, this is an on-screen display of the latest messages (e.g. page 
111). 
•  “Reveal“ concealed information, e.g. VPS pages in the station preview pages.
•  Programme wizard for recording via teletext.
In the settings, you will find menus to define the station preview pages, subtitle 
pages and personal text pages, and menus to set the character set selection as 
well as HiText graphics.
  100  100   ARD-Text           10.09.04       14:14:42ARD TEXT
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . .    120
Wird auch der Nahverkehr teurer? . . . . . . . .    121
Australien: Keine Zugeständnisse  . . . . . . . .    122
Tote bei Zugunglück in Schweden . . . . . . . .    532
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .    204
Formel 1: Schumacher erneut vorne . . . . . . .  213
Tagesschau . .  110/112  Kultur. . . . . . . . .    500
Wetter. . . . . . . . . . .  170  Gesellschaft . . .  530   
Sport. . . . . . .   200/600  Lotto/Toto . .    666
TV Guide . . .  300/400  Wirtschaft. . . . . .   700
                  Internet: www.ard-text.de
Inhalt    tagesschau
Index
> 101
ENDINFO
MenuRevealcordingReSettingsNewsflash
Personal text pages        ...
Digital teletext operation (only for MHEG-5 device versions x27/28)
In the UK, the teletext for DVB-T stations is transmitted as per the MHEG-5 stan-
dard (standard of the Multimedia and Hypermedia Expert Group). It contains text, 
graphics, functions and links.
The operation of these menus depends on the particular provider. Normally after a 
station is changed, the provider broadcasting the digital teletext makes an intro-
ductory offer for this service on the screen via menu selection. Follow these notes.
If no message appears telling you how to switch to digital teletext after switching 
to another station, press the TEXT key. If a selection for DVB subtitles is available, 
this item must be hidden before.
Depending on the provider’s respective offer, you can use the  buttons 
and the OK button, the coloured keys, the END/TEXT button and sometimes 
even the numeric buttons.
If you want to close the digital teletext, just select a different station using the 
P+/P– buttons or follow the menu prompts on the screen.
Notes: 
•  Digital teletext is not available when DVB subtitles are being displayed.
•  If a timer recording is programmed at the TV-set, at the start time of the recor-
ding the digital teletext mode is switched off automatically
BA32789_021XelosModusRel_5_GB.in30   30BA32789_021XelosModusRel_5_GB.in30   3015.01.2007   16:56:3715.01.2007   16:56:37