Luxeon Projector X2 Plus User Manual

LCD Projector User Guide
8 88 8
8
Starting the Presentation
We recommend turning on the projector and image sources in the order listed
here.
1. Connect the signal cable to the computer or video source.
2. Connect the power cord to the projector and to a power source. The Power
light begins to blink.
3. Turn on the presentation components in the order listed. To turn on the
projector, remove the lens cap and press the Power button on either the
remote control or the keypad, when lamp ready LED is on....

 9
English
4. Position the projector by using the adjustable feet on the bottom of  the
projector. Press the foot release buttons in the front of the projector to raise
or lower the feet.
5. Turn the focus ring to focus the image and turn the zoom ring to zoom in or
out on the image.
6. Make any necessary image adjustments by using the on-screen menus.
Turning Off the Projector
Turn off the projector and image sources in the order listed here.
To turn off the projector:
1. Press the Power button on the...

LCD Projector User Guide
10 1010 10
10
OSD Menu Format and Description
Basic Menu
Description :
Use the up and down keys to select item.
Use the - and + keys to adjust value.
Hit ↵ to exit. Description :
Use the up and down keys to select function item.
Use the - and + keys to adjust value.
Hit ↵ to exit.
Picture Menu at PC Mode Keystone correction
            Description: Use the - and + keys to adjust the keystone level of
            display.
Volume
            Description: Use the - and + keys to...

 11
English
Horizontal position (Data only)
                 Description: Use the - and + keys to adjust the display position in
                horizontal direction
Vertical position (Data only)
                 Description: Use the - and + keys to adjust the display position in
                vertical direction
Tracking (Data only)
                 Description: Use the - and + keys to adjust the sampling number
Frequency (Data only)
                 Description: Use the - and + keys to adjust the...

LCD Projector User Guide
12 1212 12
12
Utilities - 2 MenuUtilities   - 1 Menu
Description :
Use the up and down keys to select item.
Use the - and + keys to adjust value.
Hit ↵ to exit.
Digital Zoom & Pan
       Description : Press + to enter zoom mode.
       Zoom: Use “+” key to zoom.
       Pan: 1. Press “Menu” to enter panning.
                2. Press “+ “ to pan to right; “-” pan to right
                3. Press
 to pan upward;  to pan downward.
Format
       Description : Use the -and + keys to...

 13
English
Reset All
        Description : PC mode: Press + to reset all adjustable PC setting.
 Video mode: Press + to reset all adjustable Video setting.
OSD Position
   Description:Showing the OSD position .
Use the - and + keys to adjust OSD position.
On top-left, top-right, center, bottom-left, bottom-right
Hit ↵ to exit.
Auto Image
    Description : Press + key to adjust “Auto Image” setting.
ON: Enable image automatically fine tuning.
OFF: Disable image automatically fine tuning.
Utilities - 2...

LCD Projector User Guide
14 1414 14
14
Status at PC Mode
Description:
Showing the input signal status and the detected PC
mode with model number and firmware version
information.
Use + key to reset lamp hours to zero.
Hit ↵ to exit.
Status at Video mode
Description:
Showing the input signal status and the detected Video
standard with aspect ration and firmware version information.
Use + key to reset lamp hours to zero.
Hit ↵ to exit.     

 15
English
Lamp Hours Reset
Description:
Use the - to confirm lamp hours reset.
Hit ↵ to exit.
Lamp Hours Reset
Input source select
Description:
Press up , down and INPUT keys to select different input source.
Press + key to execute.
PC:         Select PC / MAC input port.
S-Video: Select the S-Video input port.
Video:     Select the Composite video input port.     

LCD Projector User Guide
16 1616 16
16
Auto Image In Progress
Description: Message for auto image in progress
Lamp Off Control
Press the  key again to turn lamp off, otherwise this screen
will disappear automatically in 10 seconds.
Out of Range
Description: Message for input signal out of range.       

 17
English  Distance                            Width x Height                                       Diagonal
5 (1.5 m)           23~ 30x  17~  23 (0.58~0.76 x0.43~0.58 m)     28.6~37.9 (0.7~1.0 m)
6.5 (2.0 m)        30~ 40x  23~  30 (0.76~1.02 x0.58~0.76 m)     38.1~50.5 (1.0~1.3 m)
8 (2.4 m)           37~ 48x  27~  36 (0.94~1.22 x0.69~0.91 m)     45.8~60.6 (1.2~1.5 m)
9 (2.8 m)           43~ 57x  32~  42 (1.09~1.45 x0.81~1.07 m)     53.4~70.7 (1.4~1.8 m)
10.5 (3.2 m)      49~ 65x  37~  48 (1.24~1.65...