Home > Makita > Saw > Makita 10 Sliding Compound Mitre Saw With Laser and Mitre Saw Stand User Manual

Makita 10 Sliding Compound Mitre Saw With Laser and Mitre Saw Stand User Manual

Add to Favourites
    Download as PDF

    View the Makita 10 Sliding Compound Mitre Saw With Laser and Mitre Saw Stand User Manual for free. All the Makita manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 1 INSTRUCTION MANUAL MANUEL DINSTRUCTION MANUAL DE INSTRUCCIONES DOUBLE INSULATION DOUBLE ISOLATION DOBLE AISLAMIENTO IMPORTANT: Read Before Using. IMPORTANT: Lire avant usage. IMPORTANTE: Leer antes de usar. Slide Compound Miter Saw Scie à Onglet Radiale Sierra de Inglete Telescópica LS1017 LS1017L 011345
    Page 2 2 ENGLISH (Original instructions) SPECIFICATIONS Model LS1017 /LS1017L Blade diameter 255 mm (10) Hole diameter 15.88 mm (5/8) Max. Cutting capacities (H x W) Bevel angle Miter angle 45° (left) 0° 50 mm x 305 mm 91 mm x 305 mm 0° (2 x 12) (3-5/8 x 12) 50 mm x 215 mm 91 mm x 215 mm 45° (2 x 8-1/2) (3-5/8 x 8-1/2) - 91 mm x 150 mm 60° (right) (3-5/8 x 5-7/8) No load speed (RPM) 4,200/min. Laser Type (LS1017L only) Wavelength 650 nm, Maximum output 1mW (Laser Class II)...
    Page 3 3 15. DISCONNECT TOOLS before servicing; when changing accessories such as blades, bits, cutters, and the like. 16. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off position before plugging in. 17. USE RECOMMENDED ACCESSORIES. Consult the owners manual for recommended accessories. The use of improper accessories may cause risk of injury to persons. 18. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally...
    Page 4 4 8. To reduce the risk of injury, return carriage to the full rear position after each crosscut operation. 9. Always secure all moving portions before carrying the tool. 10. Stopper pin which locks the cutter head down is for carrying and storage purposes only and not for any cutting operations. 11 . Do not use the tool in the presence of flammable liquids or gases. The electrical operation of the tool could create an explosion and fire when exposed to flammable liquids or gases. 12....
    Start reading Makita 10 Sliding Compound Mitre Saw With Laser and Mitre Saw Stand User Manual

    Related Manuals for Makita 10 Sliding Compound Mitre Saw With Laser and Mitre Saw Stand User Manual

    All Makita manuals