Marantz PMD671 Portable Solid State Recorder User Manual

While the display  is flashing (3 seconds) press
and release the MARK/
EDIT button two more
times.Renumber is flash-
ing in the display.How to erase all EDL marks within one track
From stop, press and hold the MARK/
EDIT
button for about 2 seconds to enter Edit mode.
TrkMkERASE is
flashing in the display.
While TrkMkERASE is flashing (3 seconds) press
and release the ENTER button  
.
Press and release the F.FWD/+ button 
 or the
 -/F.REV button 
 to select the track that
contains the EDL Marks to erase....

LINE-dB
00 40 20 12 6 2 0 over-dB
R L
FORMAT is flash-
ing in the display.
While FORMAT is flashing (3 seconds), press and
release the ENTER button
.
FORMAT OK? is
flashing in the
display.
The display asks you to confirm that you want to
format the CF card. Formatting the CF card will
erase all recordings on the card.
While FORMAT OK? is flashing, press and
release the ENTER button 
 to confirm.  (Or
press and release the STOP button 
 to cancel.)
EXECUTING will be
displayed momen-
tarily.
Done will be...

20.  TRACK JUMP forward button 
During playback, press and release to jump to the
next track. If pressed while playing the last track,
playback jumps to the first track on the CF card.
21.  - /F.REV button 
22.  F.FWD/+ button 
During playback, press and hold the -/F.REV
button 
 to Fast Reverse and, do an audible
search in the reverse direction. Press and hold
the F.FWD/+ button 
 to Fast Forward and, do
a 2X speed audible search in the forward direc-
tion.   Release to return to normal forward play-...

- 24 -
SOLID STATE RECORDER PMD671
POWER
MIC ATTEN 0dB -20dBFLAT
ANC
LEVEL CONT.LIMITERALC MANUALOFF
ONEDL PLAY
STEREO
L
AUDIO  OUTRSOURCE FILEMONITOROFF ONPRE RECMARK A-B REPEAT INPUTEDIT
SINGLE
OFFALLOFF
ONINPUT LOCKTRACK JUMPMARGIN RESET REC
UNDO
 MENU/STORE ENTER CANCELPLAY / PAUSE STOPUSB
- / REW
FWD / +
TRACK JUMP
MARGIN RESET REC
UNDO
 MENU/STOREENTERCANCELPLAY / PAUSE STOP
USB
- / F.REV
F.FWD / +
MIC INTTRACK
TIME TRACK
-dB00
4020 12
620
over-dB
R L
level margin
 MENU/STORE MARGIN RESETUSB
 23...

- 25 -
Example display 3. Press and release the F.FWD/+ button 
 (c)
or the -/F.REV button
 (d) to tab through
Preset1, Preset2 and Preset3.
4. When the correct choice is displayed, press
and release the ENTER button
 (b) to
select your Preset choice.
The display
switches to
RecFormat flash-
You can:
• Press and release the ENTER button 
 to switch to
editing the Rec Format parameters of your Preset
choice.
• Press and release the 
MENU/STORE button to store
your Preset choice and exit Menu mode.
• Press...

- 26 -
Auto Cue – Turn the Auto Cue feature on or off,
set the number of milliseconds the dB level must
meet or exceed the set threshold, and set the dB
threshold level.
S.Monitor - Turn the Stop Monitor feature on or
off.
SinglePly – Turn the single track play feature on
or off.
Remote – Set the effect of the optional wired
remote contact closure switch plugged into the
REMOTE 1 jack.
ID1Dscrpt – Set the description ID code for
broadcast wave file recordings.
ID2Origin – Set the origin ID code for...

- 27 -
PM
PM
Example
display.
7. With the hour flashing, press and release the
F.FWD/+ button 
 or the -/F.REV button
to tab through hours. AM, PM will change
when you pass 12, check that it is correct.
When the hour and AM/PM is correct, press
and release the ENTER button
.
The minute will be flashing.
Example
display
8. With the minute flashing, press and release
the F.FWD/+ button 
 or the -/F.REV
button
 to tab through minutes. When the
minute is correct*, press and release the
ENTER button 
....

- 28 -
Beep
When battery charge can provide no more than
1-3 minutes of recording or playback and Beep is
set to On, the CHARGE indicator, REC indicator
and the battery indicator in the display will flash,
and the PMD671 will beep through the head-
phones or speaker.
If the PMD671 is not operated for 30 minutes
during stop or play pause, power can be auto-
matically shut off to conserve battery life. (See
A.PowOFF.) If A.PowOFF is set to Yes, and Beep
is set to ON, the PMD671 will beep to alert you
that...

- 29 -
4. Press and release the F.FWD/+ button  or
2. With Preset flashing, press and release the
F.FWD/+ button
 repeatedly
until Batt type  is
displayed.
3. Press and release the MENU button 
.
The Batt type
choice will flash.
 4. Press and release the F.FWD+ button 
 to
tab through the
Battery type
choices. 1. From stop, press and hold the 
MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display. the -/F.REV
button 
 to
toggle between
Yes and No.
5. When the desired state...

- 30 -
Rec Format
The PMD671 can record from analog or digital
inputs, on one channel (mono) or two (stereo), in
PCM at 24 or 16 bits, and in MP2 or MP3 com-
pression formats.
For given channels and formats the PMD671 can
record at several bit rates and sample frequen-
cies.
The file extension (.wav, .mpg, .mp3) is set by the
file format chosen (PCM, MP2, MP3) except for
BWF files (Broadcast Wave Format). The BWF
file extension can be either .wav, or .bwf.
As audio quality goes up (more bits, less com-...