Home > Metz > Television > Metz Milos 37s Operating Instructions

Metz Milos 37s Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Metz Milos 37s Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							HOME ENTERTAINMENT
    Operating instructions
    for all LCD-TV sets
    Metz - always first class.605 47 2029.A1
    05/41/10
    LCD-TV
     
    						
    							Extended functions
    1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . 4
    2. Safety notes . . . . . . . . . . . . . . . . . . . . . . . . 5
    3. The Remote Control . . . . . . . . . . . . . . . . . . 6
    4. Daily Operation . . . . . . . . . . . . . . . . . . . . . 8
    5.  Selecting the Operating Mode . . . . . . . . . . . 8
    6.  Station Selection. . . . . . . . . . . . . . . . . . . . . 9
    7. User Help (Information). . . . . . . . . . . . . . . 10
    8. Menu Control. . . . . . . . . . . . . . . . . . . . . . 11
    9. Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . 12
    10. AV Playback . . . . . . . . . . . . . . . . . . . . . . 15
    10.1 AV Playback VCR function . . . . . . . . . . . . 17
    11. General Picture Settings . . . . . . . . . . . . . . 18
    11.1 Picture Settings for Progr. via TV Menu . . . . 20
    11.2 Picture Settings for Progr. via Station Table . 21
    12. General Sound Settings . . . . . . . . . . . . . . 22
    12.1 Sound Settings for Progr. via TV Menu . . . . 25
    12.1 Sound Settings for Prog. via the Stat. Table . 28
    13.  Colour Standard . . . . . . . . . . . . . . . . . . . 29
    14. Automatic Zoom. . . . . . . . . . . . . . . . . . . . 30
    15. Childlock . . . . . . . . . . . . . . . . . . . . . . . . . 31
    16. Reminder . . . . . . . . . . . . . . . . . . . . . . . . . 33
    17. Timer Control . . . . . . . . . . . . . . . . . . . . . . 34
    17.1 Setting the Time and Date . . . . . . . . . . . . . 35
    17.2 Recording Control . . . . . . . . . . . . . . . . . . 36
    18. Special Functions
    - Picture-in-Picture . . . . . . . . . . . . . . . . . . 38
    - Normal/Speech . . . . . . . . . . . . . . . . . . . 39
    - Timer Overview . . . . . . . . . . . . . . . . . . . 39
    - Direct Recording (OTR) . . . . . . . . . . . . . . 41
    - Picture format . . . . . . . . . . . . . . . . . . . . 42
    - Picture Position. . . . . . . . . . . . . . . . . . . . 43
    18.1 Programming the Function Keys. . . . . . . . . 44
    19. Sound Settings Mute Function . . . . . . . . . . 45
    20. EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
    20.1 Activating the EPG . . . . . . . . . . . . . . . . . . 47
    20.2 Collecting EPG Data . . . . . . . . . . . . . . . . . 48
    20.3 Using the EPG . . . . . . . . . . . . . . . . . . . . . 49
    20.3 Using the EPG Recording a Programme . . . 51
    21. Setting the Country and Language . . . . . . . 52
    22. Setting Stations - 
    Setting the reception mode. 53
    22.1 TV-Standard2)for analogue stations . . . . . . 54
    22.1 Analogue TV . . . . . . . . . . . . . . . . . . . . . . 55
    22.1 Colour standard for analogue stations . . . . 56
    2
    Foreword
    Dear customer,
    thank you for selecting a Metz
    LCD TV set.
    We have equipped this TV set
    with a menu system which uses
    file cards and believe that this
    will provide you with a user
    interface that is easy to under-
    stand.
    If you have any problems, you
    can press the INFO key to
    display a help function that will
    assist you in setting up your TV
    set.
    However, you should read at
    least sections 1 to 8 of the Ope-
    rating Instructions before putting
    your new TV set into service.
    Your METZ-WERKE
    Metz-Werke GmbH & Co KG
    Postfach 1267
    D-90506 Zirndorf/Germany
    Fon: +49 911/97060
    Fax: +49 911/9706340
    www.metz.de
    [email protected]
    Basic functions
    Contents
     
    						
    							3
    Contents
    Configuration
    Worth knowing
    22.2 Automatic DVB-T station search . . . . . . . . . 57
    22.2 Manual DVB-T station search . . . . . . . . . . 58
    22.3 Automatic DVB-C station search . . . . . . . . 59
    22.3 Manual DVB-C station search . . . . . . . . . . 60
    23. Station Logo. . . . . . . . . . . . . . . . . . . . . . . 61
    24. Sorting Stations . . . . . . . . . . . . . . . . . . . . 62
    25. Reg. AV Devices . . . . . . . . . . . . . . . . . . . . 63
    - Data Logic . . . . . . . . . . . . . . . . . . . . . . . 64
    - Setting the signal types RGB . . . . . . . . . . 66
    - Setting the signal types DVI / HDMI. . . . . 67
    25.1 Removing AV Devices . . . . . . . . . . . . . . . . 68
    26. Initial Programme Position. . . . . . . . . . . . . 69
    27. Sound via HiFi Amplifier HiFi output . . . . . 70
    28. Display Configuration . . . . . . . . . . . . . . . . 72
    29. DVB Radio Mode . . . . . . . . . . . . . . . . . . . 73
    30. Scope of Operation . . . . . . . . . . . . . . . . . 74
    31. Operation without the Remote Control . . . . 76
    32. Connecting Headphones . . . . . . . . . . . . . . 76
    33. Sound 1, Sound 2 . . . . . . . . . . . . . . . . . . 77
    34. Cleaning the TV Set . . . . . . . . . . . . . . . . . 77
    35. Connections on the Front . . . . . . . . . . . . . 78
    35.1 Connections on the Rear of the Set. . . . . . . 79
    36. Copying between AV Devices
    Direct recording . . . . . . . . . . . . . . . . . . . . 80
    37. Setting the Picture Format . . . . . . . . . . . . . 82
    38. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . 83
    39. Technical Data . . . . . . . . . . . . . . . . . . . . . 86
    40. Upgrade Kits . . . . . . . . . . . . . . . . . . . . . . 88
    41. Basic differences between
    analog terrestrial reception and DVB-T. . . . 89
    Problems, Possible Causes, Remedies . . . . . . . . . 91
    Appendix for DVB satellite reception
    (applicable only if a satellite tuner is installed)
    A1. Setting up the Satellite Antenna System,
    LNB Supply Voltage . . . . . . . . . . . . . . . . . 93
    A1.1 Setting up the Satellite Antenna System,
    DiSEqC System . . . . . . . . . . . . . . . . . . . . 94
    A1.2 Setting up the Satellite Antenna System,
    Selecting Satellites . . . . . . . . . . . . . . . . . . 95
    A.2 Setting Stations, Search Settings . . . . . . . . 96
    Setting Stations, Automatic Search. . . . . . . 97
    Setting Stations, Manual Search . . . . . . . . 98
    Setting Stations, Updating the Data . . . . . . 99
    Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
     
    						
    							4
    • Take care that no bright artificial light or sunshi-
    ne falls directly on the screen. This could cause
    reflections which have a negative effect on the
    brilliance of the picture.
    • The optimum viewing distance is about five
    times the screen diagonal dimension. For TV
    sets with a 70 cm screen, it is thus about 3.5
    metres.
    • The antenna cable and any other components
    (such as a video recorder) connected between
    the antenna socket in the wall and the TV set
    must comply with the European standard 
    EN 60966-2-4.
    • The antenna cable used for connecting the TV
    set must have a screening attenuation of at least
    75 dB.
    • The use of non-approved cables will invalidate
    the operating permission for the TV set.
    • For details of how to connect peripheral devices
    such as video recorders, DVD players, etc. press
    the „INFO“ key to call the help function, select
    „Connecting AV devices“ with the cursor and
    press „OK“ to display the information.
    1. Installation
     
    						
    							5
    2. Safety notes
    • Always place the monitor on a solid,
    stable surface.
    • If a cold TV set is moved to a warm
    room, always allow any condensation
    on the screen to evaporate before swit-
    ching it on.
    • The TV set is intended for use in a dry
    room. If, in exceptional circumstances,
    you use it outdoors, take care that is
    protected against moisture (rain, splas-
    hed water, dew).
    • TV sets need adequate ventilation.
    Never cover the openings on the rear
    of the set with curtains, doilies, new-
    spapers, etc. Also take care that the
    slits in the bottom of the case are freely
    accessible so that the intake of the
    cooling air is not hindered.
    • If you place the TV set in a wall unit,
    leave sufficient space on all sides for
    the circulation of cooling air.
    • Do not place the TV set close to a radi-
    ator, since this would effect adequate
    cooling.
    • Do not place
    - burning candles or 
    vessels containing liquids (vases, etc.)
    on top of the TV set, since any hot wax
    or water dripping into the set could
    cause serious damage to the electronic
    components and could also jeopardize
    the electrical safety of the set. 
    • Lightning can damage electrical equip-
    ment. A lightning flash entering the
    power cable or the aerial cable can
    damage the TV set even if it is swit-
    ched off. You should therefore discon-nect the power cable and aerial cable
    from their outlets or from the TV set in
    the case of a thunderstorm.
    • The monitor may be opened and
    repaired only by a qualified person. 
    CAUTION! HIGH VOLTAGES CAN KILL !
    If repairs should be necessary, consult
    your local dealer.
    • Always switch off the TV set before cle-
    aning it.
    • Do not hold the remote control directly
    in front of your eyes and press a but-
    ton. The remote control emits infrared
    radiation!
    • Do not place rechargeable batteries in
    the battery compartment of the remote
    control. 
    Use only two 1.5 V dry batteries of the
    type LR03/AM4/AAA (Micro).
    • The TV set is intended only for the
    reception and reproduction of picture
    and sound signals.
    • The TV set may be operated only from
    a mains voltage of 230-240V VAC, 
    50 Hz. Australia: 240 VAC.
    • Lay the power cable so that nothing
    stands on it and no-one can trip over
    it.
    • Do not display still pictures, logos, etc.
    for long periods, since this may result
    in permanent marking of the screen.
     
    						
    							6
    
    
    
    
    
    
    
    	
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    The remote control sends commands to
    the TV set by means of an infrared sig-
    nal. You must point it towards the TV set
    when using it. Note that the remote con-
    trol may interfere with the operation of
    other devices which use infrared signals
    (such as infrared headphones).
    Sunlight falling directly on the TV set
    may interfere with the operation of the
    remote control, since the TV set cannot
    detect the infrared signals from the
    remote control under these conditions.
    The TV set must be switched on with the
    main power switch before it can be con-
    trolled with the remote control.
    The most important keys
    for normal use
    ON
    Switches the TV set on with program-
    me position 1 or the programmed
    initial programme position selected,
    or switches it OFF (to the standby sta-
    te).
    
    Numeric keys (direct station selection).
    P+ /P- Selects the next/previous pro-
    gramme position.
    Volume control.
    Setting can be changed in the menu.
    Back to the previously selected
    station.
    Displays the station table.
    3. The Remote Control
    Do not insert rechargeable batteries in
    the batter y compartment of the remo-
    te control.
    Use only two dry batteries of the type
    LR03/ AM4/AAA 1.5V.
    21
    22
     
    						
    							7
    3. The Remote Control
    Over view of the functions of the keys
    Switch to DVB radio mode.
    Switch on from the standby state into radio mode1).
    Function keys:
    F1/F2/F3: press brieflyto call the functions set in the factory.
    F1/F2/F3: press and holdto display a selection of special functions.
    AV: press to select one of the previously configured AV devices.
    	Cursor control key in the Information window and the “TV menu”.
    
    OK: confirmation key.
    Volume control; values can be set in the TV menu.
    
    Exit key: exit from the menu without saving any changes you have made.
    Open the TV menu.
    In the menu: back to the main menu.
    Open the electronic programme guide (EPG). 
    Open the Teletext window. 
    Mute. 
    Freeze frame.
    Back to the previously selected station.
    In the TV menu: open the Configuration menu.
    Display the date and time.
    In the TV menu: open the Timer window.
    Display the station table.
    In the TV menu: open the station table or the station features window.
    Display the sound functions.
    In the TV menu: open the AV devices window.
    Display the picture functions.
    In the TV menu: open the picture and sound window.
    Back to the TV picture.
    Switch from radio mode
    1)to TV mode.
    Switch on from standby mode into TV mode.
    Display the AV menu Replay/record.
    Switch on  from standby mode into AV mode.
    Display the Information window. In the Information window:
    back to the table of contents.
    21
    22
    1) Possible only in DVB mode !
     
    						
    							8
    4. Daily Operation
    Switching on
    Switch on the TV set with the main
    switch. 
    The TV set is now in standby mode and
    the red standby indicator lights.
    After about five seconds, the TV set swit-
    ches to programme position 1 or to the
    programmed initial programme position.
    If you press no further keys on the remo-
    te control, a window requesting that you
    do so is displayed after about 10 minu-
    tes. If you do not do this, the TV set swit-
    ches back to the standby state.
    Use the numeric keys to select any des-
    ired programme position. Pressing the
    key selects programme position 1 or,
    if it is programmed, the initial program-
    me position (see page 69).
    Switching off
    Press the  key to switch the TV set to
    standby mode. If you do not intend to
    use the TV set for a longer period, switch
    it off with the main power switch.
    Adjusting the volume
    The volume can be adjusted with
    the 
    -+
    key.
    Adjusting the picture and sound
    settings
    Call the picture settings with the blue key
    or the sound settings with the yellow
    key  . The setting box with the various
    functions is then displayed at the bottom
    left of the screen. Use the rocker key
    P+/P- to select the desired function
    and then use the 
    -+
    key to adjust the
    setting.
    5. Selecting the Operating Mode
    TVAVR
    You can switch the TV set between its various ope-
    rating modes with the keys TV, AV and R.
    You can also switch from standby mode to the
    desired operating mode with these keys.
    If you switch on the TV set with one of these keys,
    the station in the operating mode selected before
    the TV set was switched off is again selected.
    TV = TV mode
    AV = TV mode with input from AV devices 
    (e.g. video tape recorder, DVD player, etc.)
    R = DVB Radio mode 
    1)
    1) Possible only in DVB mode !
     
    						
    							9
    6. Station Selection
    Station selection and management of
    programme positions
    The TV set can store the settings for up to 2000 TV
    stations and 2000 radio stations in so-called pro-
    gramme positions. You can select any of these
    programme positions with the numeric keys, with
    the oval rocker key P+/P- or from the station
    table.
    If you use the numeric keys for station selection,
    the first digit you enter is normally the thousands
    digit. If less than 1000 programme positions are
    occupied, it automatically becomes the hund-
    reds digit.
    If less than ten programme positions are occupied,
    the first digit you enter automatically becomes the
    units digit.
    After pressing any numeric key, you have three
    seconds to press further numeric keys.
    Selecting stations from the station table
    In normal TV or radio 1)mode, you can display
    the station table by pressing the white
    key. In the table which is then dis-
    played, you can use the oval rocker key
    P+/P- or the numeric keys to select the
    desired station and then press the OK
    key to display this station.
    If the station table contains more than
    20 stations, you can display the next 10
    stations by pressing the oval cursor con-
    trol key .
    Back to the last station
    You can use the red  key to switch back and
    forth between the last two stations you have selec-
    ted.
    Opening the menu
    10 Kabel 1
    9 Nord 3
    8RTL
    7 PRO 7
    6 Nord 3
    5 PRO 7
    4SAT1
    3 Bayern 3
    2 ZDF
    1 ARD
    56 Hessen 3
    55 SW-BW
    54 N-TV
    53 West 3
    52 Phönix
    Select with...
    or       .
    Confirm with      .
    OK
    1) Possible only in DVB mode !
     
    						
    							10
    During the design of this TV set, we have made
    every effort to make it as easy a possible for you
    to use it and we hope that you will enjoy familiari-
    sing yourself with your new TV set.
    With the Information menu, the TV set is able to
    answer the many questions which may come up
    during installation and setup.
    To display this menu, simply press the INFO key
    for the table of contents.
    The Information menu (user help)
    In the table of contents or the index, you
    can select the item of interest with the cursor
    control key.
    Use the cursor-right key to scroll for-
    wards through the contents or index ...
    Use the cursor-left key to scroll back-
    wards through the contents or index ...
    Use the cursor-up key to select the last
    underlined item ...
    Use the cursor-down key to select the
    menu lines...
    ... and then press the OK key to display
    the explanation of the selected item.
    You can select any underlined word in the table of
    contents, the index or the explanation of a selec-
    ted item with the cursor. Pressing the OK key
    then displays the explanation for this word.
    You can also scroll forwards and backwards
    through previously displayed pages with the aid
    of the red and green keys.
    7. User Help (Information)
    OK
    Opening the Info
    INFO
    InformationContents
    Index
    Station selectionPicture settingsSound settingsAV playbackRecording facilities:- Timer recording- Direct recording- AV copyingTeletextFunction keysDVB radio modeElectronic Programm Guide (EPG)
    Select the underlined textwith the cursor.
    : further information : table of contents
    Visited pages:   backforwardOKINFO
     
    						
    All Metz manuals Comments (0)

    Related Manuals for Metz Milos 37s Operating Instructions