Midway Cruis N Exotica 27 Dedicated Game Operations Manual

Diagnostics - 23
Main Menu
     Game Adjustments, continued
          Multi Player Free Races Menu
Multi Player Free Races
This determines whether or not multiple players win free races for top scores.  The setting range is:
-On:
-Off:
-Factory Setting:     Off
Main Menu
     Utilities
UTILITIES
To clear bookkeeping memory and reset factory defaults, select Utilities at the Main Menu. Press the
Volume Up or Volume Down button to highlight the Utilities option on the Main Menu, then press the Test
button....

Diagnostics - 24
Main Menu
     Utilities, continued
          Clear Credits Menu
Clear Credits
Press the Volume Up or Volume Down buttons to highlight the Clear Credits option on the Main Menu,
then press the Test button.  This returns all credit values to zero and removes credit amounts from
memory.
- Yes
- No
- Factory Setting: NO
Main Menu
     Utilities, continued
          Clear Game Audits Menu
Clear Game Audits
Press the Volume Up or Volume Down buttons to highlight the Clear Game Audits option...

Diagnostics - 25
Main Menu
     Calibrate Controls
CALIBRATE CONTROLS
To calibrate controls for optimum performance, select Calibrate Controls at the Main Menu.
CALIBRATE CONTROLS
TURN  WHEEL  LEFT
        PRESS THE TEST TO CONTINUE
TURN  WHEEL  RIGHT
       PRESS THE TEST TO CONTINUE
PRESS THE GAS PEDAL
       PRESS THE TEST TO CONTINUE
PRESS THE BRAKE PEDAL
       PRESS THE TEST TO CONTINUE
Press the Volume Up or Volume Down buttons to highlight the Calibrate Controls option on the Main
Menu, then...

Diagnostics - 26
NOTES 

	


™










	


 

Service - 2
SAFETY INSTRUCTIONS
The following safety instructions apply to operators and service personnel.  Read these
instructions before preparing the Video Game Machine (VGM) for play.  Other safety instructions
appear throughout this manual.
DEFINITIONS OF SAFETY TERMS
♦
 DANGER
 indicates an imminent hazard.  If you fail to avoid this hazard, it WILL cause death
or serious injury.
♦
 WARNING
 indicates a potential hazard.  If you fail to avoid this hazard, it COULD cause
death or serious injury.
♦...

Service - 3
CAUTION: USE CARE WHEN SHIPPING HARD DISKS.
The hard disk drive must be packed in an anti-static bag.  When shipping the drive for
repair or replacement, pack it in an approved container (P/N 08-8068).  Do not stack or
drop hard disk drives.
WARNING: HAZARD TO EPILEPTICS.
A very small portion of the population has a condition which may cause them to
experience epileptic seizures or have momentary loss of consciousness when viewing
certain kinds of flashing lights or patterns that are present...

Service - 4
SERVICING
Only qualified service personnel should perform maintenance and repairs. The product guidelines
apply to all operators and service personnel. Specific notes, cautions, and warnings appear
throughout the manual where they apply. W e recommend that you read the SAFETY NOTICES
section thoroughly before beginning service. 
NOTE:  
Always switch off power to the game
before servicing
.
To service the Marquee…
Refer to the 
Marquee Service illustration.
¾  Switch off the power to the game...

Service - 5
To service the Fluorescent Lamp or Starter…
Refer to the Marquee Service illustration.
¾  Switch off the power to the game machine and unplug the AC line cord.
¾  Remove the marquee. Refer to service instructions for Marquee.
¾  Reach inside the opening in the cabinet and remove the fluorescent lamp locks.
¾  Both the fluorescent tube and the starter require a quarter turn for removal. Grasp the
tube or starter, give it a quarter turn and pull it from its socket.
¾  Carefully place a new...

Service - 6
Bezel Service
To service the Monitor (CRT)…
We recommend that you read the WARNINGS thoroughly before beginning this procedure.
CAUTION
The video monitor is heavy, with most of the weight toward the front of the
assembly. Be sure it is firmly supported as it is moved from the cabinet.
WARNING
The monitor does not require isolation from the AC line voltage in normal
operation. W hen operating outside the cabinet or servicing the monitor on a
test bench, ISOLATE THE MONITOR FROM LINE VOLTAGE...