Home > Miele > Dishwasher > Miele Dishwasher G 1023 U Manual

Miele Dishwasher G 1023 U Manual

Here you can view all the pages of manual Miele Dishwasher G 1023 U Manual. The Miele manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 51

Cleaning the drain pump and
non-return valve
If the water has not been pumped away
at the end of a programme the drain
pump or the non-return valve might be
blocked. They are, however, easy to
clean.
^Disconnect the dishwasher from the
mains supply. Switch off at the mains
socket and withdraw the plug.
^Take the filter combination out of the
wash cabinet (see Cleaning and
care - Cleaning the filters in the wash
cabinet).
^Scoop the water out of the cabinet
using a suitable container or utensil.
^
Press...

Page 52

Repairs
In the event of any faults that you
cannot remedy yourself, please
contact:
–Your Miele Chartered Agent, or
–the Miele Service Department (see
back cover for address).
Please note that telephone calls may
be monitored and recorded to
improve our service.
^When contacting your Chartered
Agent or the Service Department,
please quote the model type and
number of your appliance, both of
which are shown on the data plate on
the right hand side of the door.Future updates
The programme update function...

Page 53

Test standard:AS/NZS 2007.1:2005, AS/NZS 2007.2:2005;
AS/NZS 6400:2005
Standard programme for
energy label comparison tests:Normal
Capacity:12/14 place settings
(depending on model)
Amount of detergent: 12 place settings: 5 g in compartment I,
25 g in compartment II
14 place settings: 5 g in compartment I,
27,5 g in compartment II
Rinse aid dispensing:Setting 3 (approx. 3 ml)
Drying measurements:Door ajar using a block of approximately
50 mm upon completion of dry test.
Loading examples
Pictures...

Page 54

Model types G 1xxx with a cutlery tray (12 place settings):
Upper basket
Cutlery trayLower basket
Comparison tests
54 

Page 55

Model types G 2xxx with a cutlery tray (14 place settings):
Upper basket
Cutlery trayLower basket
Comparison tests
55 

Page 56

Programme When to use
Sensor wash Sensor controlled programme
fornormally soiledcrockery
Normal
1)Fornormally soiledcrockery where soiling has not dried on.
Energy saving programme using low temperatures and a longer wash duration;
includes glass care system.
Quick wash Quick programme forlightly soiledcrockery, e.g. party crockery;
for flushing out salt residues after replenishing the salt reservoir;
includes glass care system;
not suitable for tablet detergents.
Pots & pans Forvery heavily...

Page 57

Programme sequence Consumption Duration
Energy Water
Pre-
washMain
wash
°CInterim
rinse
12Final
rinse
°CDrying Cold
water
connec-
tion
(20 °C)
kWhHot
water
connec-
tion
(60 °C)
kWhLitres Cold
water
connec-
tion
(20 °C)
kWhHot
water
connec-
tion
(60 °C)
kWh
If
required55-65 If
required65 X 1.30-1.60 0.75-1.00 13-22 1:45-2:30 1:35-2:16
X 45 50 X 0.75 0.35 14.1 2:06 1:55
40 X 45 0.70 0.22 13 0:33 0:25
X 75 X 65 X 1.70 1.20 17 2:39 2:29
50 X 65 X 1.25 0.90 13 1:32 1:20
X 0.02 0.02 5 0:12 0:12
The durations...

Page 58

To make the most of your dishwasher
Optional accessories for particular purposes are available from your Miele
Chartered Agent or the Spare Parts Department (some may be supplied as stan
-
dard, depending on model).
If you would like to … you will need to order …
… wash long-stemmed glassware … a glassware insert for the upper
basket
... wash bottles,
e. g. milk or baby bottles… a bottle holder
… wash additional items of cutlery … a small cutlery basket for the lower
basket
... wash a lot of glasses … a...

Page 59

,Please follow the installation
instructions carefully.
All electrical work should be carried
out only by a suitably qualified and
competent person, in strict
accordance with national and local
safety regulations.
Ensure power is not supplied to the
appliance while installation work is
being carried out.
This dishwasher is supplied with a
mains cable and moulded plug ready
for connection to an a.c. single phase
supply, (230 V 50 Hz for NZ and
Australia) via a fused plug and suitable
switched socket which...

Page 60

The Miele waterproof anti-leak
system
Providing your dishwasher has been
installed correctly, the Miele waterproof
anti-leak system will protect you from
water damage throughout its lifetime.
Connection to the water
supply
,Water in the dishwasher must
not be used as drinking water.
–The dishwasher may be connected
to a cold or hot water supply, max.
60 °C. We would only recommend
connection to a hot water supply if it
is economical, e.g. a solar powered
supply. When connected to a hot
water supply all...
Start reading Miele Dishwasher G 1023 U Manual

Related Manuals for Miele Dishwasher G 1023 U Manual

All Miele manuals