Home > Miele > Dishwasher > Miele G 1232 Sc Operating Instructions

Miele G 1232 Sc Operating Instructions

Here you can view all the pages of manual Miele G 1232 Sc Operating Instructions. The Miele manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 51

Problem Possible cause Remedy
Glassware has a
brown or blue tinge,
and film cannot be
wiped off.This may be caused by the
detergent.Change your detergent.
Glassware is dull and
discoloured; film
cannot be wiped off.The glassware is not
dishwasher-proof. The
surfaces are affected.There is no remedy.
Purchase glassware which
is dishwasher-proof.
Tea or lipstick stains
have not been
completely removed.The wash temperature of
the selected programme
was too low.Select a programme with a
higher wash...

Page 52

Cleaning the water inlet filter
A filter is incorporated in the screw
connection of the valve on the water
inlet hose. The filter must be cleaned
when dirty, otherwise insufficient water
flows into the wash cabinet.
,The plastic housing of the water
connection contains an electrical
component. It must not be dipped in
water.
Recommendation
If the mains water contains a large
number of insoluble substances, we
recommend fitting a large-area filter in
the connection between the stopcock
and the water inlet...

Page 53

Cleaning the drain pump and
non-return valve
If the water has not been pumped away
at the end of a programme the drain
pump or the non-return valve might be
blocked. They are, however, easy to
clean. Watch out for glass or bone
splinters which could cause injury.
^Disconnect the dishwasher from the
mains supply. Switch off at the mains
socket and withdraw the plug.
^Take the filter combination out of the
wash cabinet (see Cleaning and
care, Cleaning the filters in the wash
cabinet).
^Scoop the water out...

Page 54

Repairs
In the event of any faults that you
cannot remedy yourself, please
contact:
–your Miele dealer, or
–the Miele Service Department
(see back cover for contact details).
^When contacting your Dealer or the
Miele Service Department, please
quote the model type and number of
your appliance, both of which are
shown on the data plate on the right
hand side of the door.
Please note that telephone calls may
be monitored and recorded for
training purposes.Future updates (PC)
The programme update function...

Page 55

To make the most of your dishwasher
Optional accessories for particular purposes are available from your Miele dealer
or from the Spare Parts Department (some may be supplied as standard
depending on model).
If you would like to … you will need to order …
… wash long-stemmed glassware … a glassware insert for the upper
basket
... wash a Miele Cappuccinatore … a Cappuccinatore insert for the
upper basket
... wash bottles,
e. g. milk or baby bottles… a bottle holder
… wash additional items of cutlery … a...

Page 56

Programme When to use
Sensor wash Sensor controlled programme
fornormally soiledcrockery
Quick wash 40 °C Quick programme forlightly soiledcrockery, e.g. party crockery;
for flushing out salt residues after replenishing the salt reservoir;
includes sensor controlled
3)glass care;
not suitable for tablet detergents.
Sensor wash
gentle:Sensor controlled
3)gentle programme
forlightly soiled and temperature sensitivecrockery and glassware;
reduce detergent by 50%
Energy save
1)fornormaleveryday loads,
energy...

Page 57

Programme sequence Consumption Duration
Energy   kWh Water h:min2)
Pre-
wash
12Main
washInterim
rinse
12Final
rinseDrying Cold
water
connec-
tion
(15 °C)Hot water
connec-
tion
(55 °C)Litres Cold
water
connec-
tion
(15 °C)Hot water
connec-
tion
(55 °C)
if
requiredX
45 °- 65 °if
requiredX
65 °X 1.0-1.5 0.65-0.8 13-22 1:39-2:34 1:24-2:08
X
40 °XX
50 °0.75 0.22 13 0:33 0:22
if
requiredX
37 °- 48 °if
requiredX
55 °X 0.85-1.0 0.4-0.5 13-22 1:25-1:55 1:14-1:36
X
45 °XX
60 °X 1.05 0.7 13 2:56 2:44
XX
75 °XX
65...

Page 58

Electrical connection U.K.
,All electrical work must be
carried out by a suitably qualified
and competent person, in
accordance with current local and
national safety regulations (BS 7671
in the UK).
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply. Please ensure the connection
data quoted on the data plate match
the household mains supply....

Page 59

Connection to the water supply
,Water in the dishwasher must
not be used as drinking water.
–The dishwasher may be connected
to a cold or hot water supply, max.
60 °C. We would only recommend
connection to a hot water supply if it
is economical, e.g. a solar powered
supply. When connected to a hot
water supply all programme stages
which would otherwise be carried out
with cold water will be carried out
with hot water.
– The inlet hose is approx. 1.5 m long.
A 1.5 metre long flexible metal
extension hose,...

Page 60

Drainage
–The appliance drainage system is
fitted with a non-return valve, which
prevents dirty water from flowing
back into the dishwasher via the
drain hose.
–The dishwasher is supplied with
approx. 1.5 m of flexible drain hose
with an internal diameter of 22 mm.
–The drain hose can be extended
using a connection piece to attach a
further length of hose.
The drainage length must not be
longer than 4 m, and the delivery
head must not exceed 1 m.
– If the hose is to be directly fitted to
the drainage...
Start reading Miele G 1232 Sc Operating Instructions

Related Manuals for Miele G 1232 Sc Operating Instructions

All Miele manuals