Miele G 2732 Operating Instructions

Program When to use Program sequence
Pre
rinseMain
washInterim rinse Final
rinseDrying
12 12
Normal Fornormally soiled
dishware withdried on
foodxxx xx
Pots & Pans Fornormally soiled pots
& panswithdried on
food, and heavily soiled
dishware, 120% detergent
recommendedxxxxx
China &
CrystalFor temperature sensitive
glassware and lightly
soiled dishware, 50%
detergent recommended;
sensor controlled
GlassCare programas
requiredx as required x x
Express Quick program forlightly
soileddishware, e.g. party...

Program When to use Program sequence
Pre-rinse Main
washInterim rinse Final
rinseDrying
12 1 2
Light Soiling Forlightly soiled
dishware, e.g. party
dishwarexx xx
Energy Saver The water intake
temperature must be
115°F (45°C) forlight
to normally soiled
dishwarexxx xx
Plastics To gently clean
dishwasher safe
plastics and plastic
toysxxxxx
Starch/Cheese For dishware with dried
on starchy or cheesy
food; 120% detergent
recommendedxxxxx
LG items
soiledFor extra large,heat
resistent items, e.g.
large...

Selecting options
Options can be added to the selected
program.
Confirm the highlighted menu
Optionswith OK.
The display shows the available options
for the selected program.
Available options:
Turbo:
–For shortening the program duration.
To achieve optimum results, energy
consumption rates will increase.
Pre-rinse:
– For easily removable soiling
Soak:
– To soak stubborn soiling.
When using powder detergent, fill
approx. 1 teaspoon (5 g) of
detergent in detergent
compartment I.
Extended drying:
–
To...

Starting a program
Press the Start button.
The program begins and the Start
indicator lights.
Cancel a program only in the first
few minutes. Otherwise important
program steps (e.g. the water
softening) could be interrupted.
Time display
Before the program starts, the time
display shows the running time of the
selected program in hours and minutes.
During the running program the
remaining time is shown in the display.
The running time for the same program
may vary depending on the intake
water...

At the end of a program
At the end of a program the display
shows
End.
Dishes tends to chip if removed still hot
from the dishwasher.
Let the dishware cool.
After turning off the dishwasher open
the door slightly. The dishes will cool
much faster.
Unload the dishwasher.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
Turn the dishwasher off	.
The dishwasher continues to use
electricity...

Interrupting a program
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
Changing a program
If the detergent flap is already open
do not change the program.
If a...

Delay Start
The starting time of a program can be
delayed between 15 minutes and 24
hours. The start can be delayed in
15-minute-increments.
When using the Delay Start
function make sure that the
detergent compartment is dry before
adding detergent, use a cloth if
necessary. The detergent might
stick together and not get
completely rinsed out. Do not use
liquid detergent when selecting
Delay Start, the detergent could
leak out of the compartment.
Turn the dishwasher on	.
The Start indicator flashes....

The Settings menu allows you to
adjust standard settings.
Opening the Settingsmenu
Turn the dishwasher on by pressing
the 	 button.
The main menu shows in the display.
If the memory function is selected, the
last selected program is displayed. See
Settings- Memory.
Select
Backto switch to the program
selection.
SettingsF...
Normal
China & Crystal
Scroll down in the list toSettings
and confirm with OK.
The display changes into the menu
Settings.
Select the desired submenu and
confirm with OK....

Time of dayY
This selection allows the clock to be
shown as 24 or 12 hours. The clock can
also be set from here.
Setting the clock format
Select the desired clock format and
confirm with OK.
The display changes to the time of day
setting.
Set the time of day
Set the hour and confirm with OK.
Set the minutes and confirm.
The display changes back to the
previous menu. To switch back to
Settings - select
Back.
Detergentz
To achieve best results the used
detergent can be set on your
dishwasher. The...

Water hardness
The dishwasher is equipped with a
sensor softener, which automatically
detects the hardness of your tap water.
The water hardness level set to the
water softener can be checked in the
display under the submenu Water
hardness.
Press OK to return to the Settings
 menu.°d gr/gal Setting in display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37-45
46-60
61-701
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30...