Miele G 2830 Sci Operating Instructions

							Split cutlery tray
^Arrange the cutlery as shown in the
cutlery tray.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge and
forks with the prongs between the
holders. Spoons should be placed in
the opposite direction with the handles
between the holders.
The upper spray arm must not be
blocked by tall cutlery items.
The inserts of the cutlery tray can be
removed.
Single inserts can be removed to make
room for tall items in the upper basket.Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders
Loading the dishwasher
21
 
						

							Upper basket
,For safety reasons only use the
dishwasher with the upper and lower
basket inserted.
Exception: The programs Large
items normal and Large items
soiled are designed for use without
the upper basket.
^Load the upper basket with small,
lightweight, or delicate items such as
cups, saucers, glasses, dessert
bowls and flat pans.
^
Long items such as soup ladles,
mixing spoons and long knives
should be placed lying down across
the front of the upper basket.Removable spike insert
The spike insert can be removed to
create more space for larger items,
e.g. a saucepan.
Removing an inserta:
^To remove an insert, gently pull on
the handle.
Inserting an insertb:
^Slide the hitches of the insert under
the vertical struts of the lower basket.
^
Push down on the handle to snap the
insert into position.
Loading the dishwasher
22
 
						

							Adjustable cup racks
^Raise the rack to make room for tall
glasses. Lower it to double stack
smaller pieces.
The height of the cup rack can be
adjusted in two levels.
^Pull the cup rack upwards and let it
engage at the desired height.Coffee bar
(depending on model)
Glasses can be leaned against the
coffee bar for a secure stand.
^The bar can also be used to separate
two rows of glasses.
^To stack wide items, flip the bar to the
right.
Loading the dishwasher
23
 
						

							Glassware rail
(depending on model)
The glassware rail is designed for a
secure stand of tall glasses and
stemmed glassware.
^Flip the bar down to lean tall glasses
on it.
^If necessary take out part of the
cutlery tray to make room for tall
glasses.Multi-function basket
The multi-function basket is designed to
securely wash baby bottles, saucers
and small items, e.g. toys.
^Remove the spike insert on the right
side of the upper basket and insert
the multi-function basket.
^Close the flaps in the bottom of the
basket when washing saucers or
other small items.
Loading the dishwasher
24
 
						

							To wash baby bottles
^Insert the nipples under the hooksa.
^Open the flapsband insert the
bottle neck into the opening.
^Small items like the rings and caps of
the bottles can be inserted in the
open spaces.
Loading the dishwasher
25
 
						

							Adjusting the upper basket
The upper basket can be raised or
lowered to accommodate tall items.
The basket can also be angled to fit tall
items in both, the upper and lower
baskets. The angles should not be set
to opposite extremes. This will block the
middle spray arm. Take care when
sliding the basket in and out in this
position.
^Slide out the upper basket.
^
Pull up the levers at the sides of the
upper basket and adjust the basket
height.
^
Release the levers and the basket will
lock in place.Depending on the setting of the upper
basket, a variety of plate dimensions
can be accommodated.
For example: If the upper basket is in
its highest position a plate with a
diameter of 12
3/16 (31 cm) can be fit in
the lower basket.
Loading the dishwasher
26
 
						

							Lower basket
^For larger and heavier items such as
plates, serving platters, saucepans,
bowls, etc.
Loading the dishwasher
27
 
						

							Comfort inserts
The comfort inserts are designed for
cups, glasses, plates, bowls, pots, etc.
^To insert tall items, raise the cup rest.
^Lean or hang stemmed glassware
such as wine or champagne glasses
in the cut outs of the cup rest.PlateGuard Plus with StemGuard
Removing an inserta:
^To remove an insert, gently pull up on
the handle.
Inserting an insertb:
^Insert the long comfort insert on the
left and the short one in the rear right.
^Slide the hitches of the insert under
the vertical struts of the lower basket.
^
Push down on the handle to snap the
insert into position.
Loading the dishwasher
28
 
						

							Removable spike insert with
StemGuard
Removing:
^Push the insert down,aand at the
same time push the latch towards the
basket,b.Vase/Bottle holder
The vase/bottle holder, e.g. for vases
and baby bottles, can be inserted into
the lower basket as shown in the
illustration.
If placed anywhere else, water will not
reach all surfaces. The bottle will not be
properly cleaned.
Basket accessories
Additional inserts for the upper and
lower baskets may be purchased from
your Miele dealer or Miele.
Loading the dishwasher
29
 
						

							Detergent
,Dishwasher detergents contain
irritant and corrosive ingredients.
Avoid inhaling or swallowing
dishwasher detergent.
Keep children away from detergent.
Fill the detergent dispenser only
when you are ready to start the
dishwasher.
,Only use detergents formulated
for domestic dishwashers.
Use only the recommended amount
of detergent. Continued use of too
much detergent may cause machine
damage.You can use powder, gel or tab
detergents. Follow the dosage
information on the detergent
packaging. See Settings - Detergent
for more information on detergent
usage.
Detergent tabs are not recommended
for use with the program Short. The
tabs may not dissolve completely.
Use
30