Miele G 2872 Operating Instructions

Adding detergent
	To open, press the latch on the
detergent dispenser. The flap will
spring open.
The flap is always open at the end of a
program.	Add detergent to compartment II and
close the flap.
	If a Pre-rinse is desired, and
available for your chosen program,
add 1 teaspoon (5 ml) of detergent to
compartment I.
The horizontal marks in compartment II
indicate the levels of approximately 1 ¼
and 2 tablespoons (20 and 30 ml)
respectively. Compartment I holds a
maximum of 2 teaspoons (10 ml).
Use
31
 

Turning on
	Make sure the spray arms can rotate freely.
	Close the door.
	Open the water supply, if closed.
	Turn the dishwasher on.
The main menu shows in the display.
If the memory function is selected, the last selected program
is displayed. See Settings- Memory.
Normal
Main menu
Pots & Pans
Selecting a program
Choose your program according to the type of load and
soiling.
The Program guide describes the programs and using.
Information about the selected program can be displayed by
pressing...

Program When to use Program sequence
Pre
rinseMain
washInterim rinse Final
rinseDrying
12 12
Normal Fornormally soiled
dishware withdried on
foodxxx xx
Pots & Pans Fornormally soiled pots
& panswithdried on
food, and heavily soiled
dishware, use 120%
detergent recommendedxxxxx
China &
CrystalFor temperature sensitive
glassware and lightly
soiled dishware,use 50%
detergent recommended;
sensor controlled
GlassCare programas
requiredx as required x x
Express Quick program forlightly
soileddishware, e.g....

Program When to use Program sequence
Pre-rinse Main
washInterim rinse Final
rinseDrying
12 1 2
Light Soiling Forlightly soiled
dishware, e.g. party
dishwarexx xx
Energy Saver The water intake
temperature must be
115°F (45°C) forlight
to normally soiled
dishwarexxx xx
Plastics To gently clean
dishwasher safe
plastics and plastic
toysxxxxx
Starch/Cheese For dishware with dried
on starchy or cheesy
food; 120% detergent
recommendedxxxxx
LG items
soiledFor extra large,heat
resistant items, e.g.
large...

The detergent type can now be set.
You can choose between powder,
gel or Tabs. See Settings- Tab.
Selecting options
Options can be added to the selected
program.
	Select the Options menu.
The display shows the available options
for the selected program.
Available options:
Turbo:
– For shortening the program duration.
To achieve optimum results, energy
consumption rates will increase.
Pre-rinse:
– For easily removable soiling
Soak:
– To soak stubborn soiling.
When using powder detergent, fill
approx. 1...

Starting a program
	Select Start.
The display shows Close the door.
To select another program or to add
options, select Back and cancel the
program with Cancel.
	Start the program by closing the
door.
The optical interface lights to indicate
that a program is running.
The program starts and Dishes can be
added appears in the display.
As long as this reference is shown,
tableware can be added to the
machine without impairing the cleaning
result.
Cancel a program only in the first
few minutes. Otherwise...

At the end of a program
At the end of a program the optical
control light flashes slowly with the door
closed.
The optical function light goes out one
hour after the end of a program.
At the end of a program the display
shows Program finished or Drying plus
with the door slightly open (if activated).
The steam being released at the
end of the program may be hot.
Use caution.
Dishes tend to chip if removed still hot
from the dishwasher. If the automatic
door opening setting is deactivated
(see Settings -...

Changing a program
If the detergent flap is already open, do not change the
program.
If a program has already started and you wish to change it:
	Open the door.
Sensor Wash 1:32 h12:00
Main washCancellation
	Select Cancellation and confirm with OK.
The program is canceled.
Sensor Wash12:00
Program finishedMain menu
	Select Main menu.
The display changes to the main menu.
	Select the desired program.
	
Select Start.
	
Start the program by closing the door.
The optical interface lights. The program...

Delay start
The starting time of a program can be delayed between 15
minutes and 24 hours. The start can be delayed in
15-minute-increments.
When using the Delay Start function make sure that the
detergent compartment is dry before adding detergent,
use a cloth if necessary. The detergent might stick
together and not get completely rinsed out.
Do not use liquid detergent when selecting Delay Start,
the detergent could leak out of the compartment.
It is recommended to add the detergent and lock the...

	Confirm with OK.
The display changes to the program menu.
	Select Start.
	Close the door.
The program starts automatically at the selected time.
The indicatorgoes out.
Starting a program before the delay start has elapsed:
A program can be started before the delay start time has
elapsed. Proceed as follows:
	Open the door.
	Select Cancel and confirm with OK.
Theindicator lights.
Sensor Wash12:00
Program finishedMain menu
	Select Main menu.
	Select the desired program.
	Select Start.
	
To start the...