Home > Miele > Oven > Miele H 5981 Bp Manual

Miele H 5981 Bp Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Miele H 5981 Bp Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 171 Miele manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Electrical connection - Country
    variants
    Please refer to your electrical
    distributor.
    Single phase AC 230 V - country
    variant
    This device is intended for connection
    to a power supply system where the
    maximum value of external phase
    neutral loop impedance Z
    maxof
    0.35 Ohms at the point of distributor
    supply connection is not exceeded.
    If in doubt, please ask your electrical
    distributor for actual Z
    maxvalue. The
    user has to ensure that this device is
    connected only to a power supply
    system which fulfils the requirement
    above.
    Wiring diagram – country variantThree phase3NAC230V
    Wiring diagram – country variant
    Electrical connection
    81 
    						
    							Dimensions are give in mm.
    Appliance dimensions and unit cut-out
    Installation in a base unit
    HAL 5900 trim, available as an optional accessory, is only required when
    building the oven into a base unit.
    Fix the HAL 5900 trim into the unit cut-out under the worktop (see lower section
    of diagram).
    *Appliances with glass front
    **Appliances with metal front
    Building-in diagrams
    82 
    						
    							Installation in a tall unit
    Building-in diagrams
    83 
    						
    							Front dimensions
    *Appliances with glass front
    **Appliances with metal front
    Building-in diagrams
    84 
    						
    							The oven must not be operated
    until it has been correctly installed in
    its housing unit. Otherwise it poses
    an electric shock hazard.
    To ensure adequate ventilation to
    the oven once installed:
    – do not fit a rear panel into the
    housing unit.
    – make sure that the shelf on
    which the appliance is placed
    does not touch the wall.
    – do not fit insulation material
    inside the housing unit.
    When installing the appliance, do
    not lift it up by the door handle as
    this can damage the door.Turn off the mains electricity supply
    to the isolator.
    Remove the handles at the sides.
    Connect the mains cable from the
    oven to the isolator.
    Push the appliance into the oven
    housing unit and align it.
    Open the oven door and using two
    screws secure it to the side walls of
    the housing unit through the holes in
    the oven trim.
    Installing the oven
    85 
    						
    							87 
    						
    							Alteration rights reserved / 22 / 2611
    (H 5981 BP)M.-Nr. 07 649 330 / 04 
    						
    All Miele manuals Comments (0)

    Related Manuals for Miele H 5981 Bp Manual