Miele Pw 6065 Operating Manual

							Standby
The display goes out after 10
minutes and the Start button
flashes slowly to save energy.
On
The display will go into Standby mode:
–if no program was selected after the
machine was turned on.
–after a program has started.
–at the end of a program.
Not in current prog.
(Factory default)
The Standby function will be turned on
if no program was selected after the
machine was turned on.
By turning the jog shuttle or pressing
any button the display is turned on
again.
Memory
The Memory function remembers the
addition of an extra feature to a
program, a change in spin speed or
the temperature the next time that
program is selected.
Once the wash program is selected
again the washer shows the saved
options.
The memory function is not active when
favorites are selected with the direct
select buttons.
The Memory function is factory set off.
Temperature unit
The temperature can be shown in
°C/Celsius (factory default) or
°F/Fahrenheit.
The delivery status is °C.
SettingsJ
61
 
						

							The menu Settings - Supervisor level must be activated
by the Technical Service.
The menu Settings (except LanguagesJ) is locked with a
code to prevent unwanted access.
Selecting Settings
SettingsBackA
LanguageF
Supervisor level
^Select Supervisor level and confirm.
SettingsBackA
Supervisor levelAccess via code
^Select Access via code and confirm.
Entering the code
Enter the code 0 0 0 (factory default). If the code is entered
wrong three times, the code entry will be locked for 1 hour.
0__
Enter code
^
Turn the jog shuttle until the first digit shows. Confirm the
digit. Enter the second and third digit.
Menu Settings - Supervisor level
62
 
						

							Confirming the code
0 0 0
Confirming the code
OK
HBackA
H
^Confirm the entered code.
WEntry OK
Menu opened
The user is now in the Supervisor level. The previously
described and all the following settings can be changed.
Change the code to prevent unauthorized access to the
settings.
Menu Settings - Supervisor level
63
 
						

							LanguageJ
The display contents can be shown
in different languages.
The fixed default language can be set
in the sub-menu LanguagesJ.
^Select the desired language and
confirm with OK.
Sort languages
The language order can be set,
when the option Language access -
international is selected.
Supervisor level
The access code for the operator
level can be changed.
^
Enter the old code.
^
Enter the new code.
Once the new code is confirmed, the
display will show the beginning of the
Settings menu.
Language menu
This option allows you to display an
additional welcome screen which
requests a language selection. The
screen can be shown before the
main menu or after the end of a
wash program.
Two options can be selected:
–International: Welcome screen
shows, an additional language has to
be selected.
–National: no additional welcome
screen (factory default).
Intensive Water plus
You can select this option if the
Extras Intensive and Water plus
are shown in the menu Extras.
The option is factory set off.
Save
The option Save can be shown in
the main menu. The function Save
is needed to save for example the
favorite wash programs on the direct
select buttons.
The machine comes factory set with
this option turned off.
Menu Settings - Supervisor level
64
 
						

							Auto load control
The washer has a Auto load control.
The water levels and the program
running times are adjusted to the
load size. If the load size automatic
is turned off the program will always
run as if for a full load.
The machine comes factory set with
this option turned on.
Pre-wash water
The water type for the pre-wash can
be selected (except for the program
Curtains). The hot water intake will
be only accessible at a wash
temperature of 86°F (30°C) or
higher.
The machine comes factory set with the
water type hot.
Main wash water
The water type for the main wash
can be selected (except for the
programs Woollens, Silk and
Curtains). The hot water intake will
be only accessible at a wash
temperature of 30°C or higher.
The machine comes factory set with the
water type hot.
If the washer is not connected to hot
water, the program running times will
be extended and vary from the
displayed remaining times.
If Industrial water is used, the
washer must be refitted accordingly.
Rinse water
The water type for the rinse in the
programs Cottons Hygiene,
Cottons Uni., Minimum iron, Table
linen, Kitchen linen, Towelling
and Sluice can be selected. The
hot water intake will be only
accessible at a wash temperature of
50°C or higher.
The machine comes factory set with the
water type hot.
If Industrial water is used, the
washer must be refitted accordingly.
Menu Settings - Supervisor level
65
 
						

							Water level Cottons
The program Cottons Hygiene and
Cottons Uni. allows you to increase
the water level for the main wash.
The machine comes factory set with the
option block parameter selected. (The
water level will be controlled according
to the factory set program data.)
Water level Min. iron
The program Minimum iron allows
to increase the water level for the
main wash.
The machine comes factory set with the
option block parameter selected. (The
water level will be controlled according
to the factory set program data.)
Pre-wash temp. Cot.
The Pre-wash temperature for the
programs Cottons Hygiene and
Cottons Uni. can be selected.
The machine comes factory set with the
option block parameter selected. (The
water level will be controlled according
to the factory set program data.)
Pre-wash duration
The wash time for the pre-wash can
be extended.
The machine comes factory set with the
option block parameter selected. (The
water level will be controlled according
to the factory set program data.)
Wash time Cottons
The programs Cottons Hygiene
and Cottons Uni. allow to increase
the water level for the main wash.
The machine comes factory set with the
option block parameter selected. (The
water level will be controlled according
to the factory set program data.)
Min. iron
The program Minimum iron allows
to extend the wash time for the main
wash.
The machine comes factory set with the
option block parameter selected. (The
water level will be controlled according
to the factory set program data.)
Menu Settings - Supervisor level
66
 
						

							No. of programs
Additional programs can be added
to the program selection.
0  Additional programs (factory default)
4  Additional programs (Table linen,
Pillows, Curtains and Kitchen
linen)
2  Additional programs (Outerwear
and Waterproofing)
6  Additional programs (all of the
above).
Hygiene
If the last used program had a
temperature of 55°C or less, the
display shows the request to start
the Hygiene program.
The machine comes factory set with
this option turned off.
Sluice
When the option is selected the
sluice programs are offered
additionally.
The machine comes factory set with
this option turned off.
Disinfection
Special disinfection programs can
be added.
0  Additional programs (factory default)
4  additional programs (Thermal
disinfection 15 min/85°C, Chemo
thermal disinfection 10 min/70°C,
Chemothermal disinfection 20
min/60°C and Chemothermal
disinfection 30 min/40°C).
Pre-wash
In the programs Cottons Hygiene,
Cottons Uni. and Minimum iron
you can select to permanently add a
pre-wash to the cycle or to select it
in the menu Extras.
The machine comes factory set with the
option Menu selection activated.
2. Pre-wash Kitchen linen
The program Kitchen linen allows
an additional pre-wash.
Add the detergent for the additional
pre-wash directly in the drum.
The machine comes factory set with
this option turned off.
Menu Settings - Supervisor level
67
 
						

							Optimize energy
The energy use for the programs
Cottons Hygiene, Cottons Uni.
and Minimum iron is at its optimum
when this option is turned on.
The machine comes factory set with
this option on.
No. rinses Cottons
The programs Cottons Hygiene
and Cottons Uni. allow you to
change the number of rinse cycles.
2 rinses (factory default)
3 rinses
4 rinses
5 rinses
No. rinses min. iron
The program Minimum iron allows
you to change the number of rinses.
2 rinses (factory default)
3 rinses
4 rinses
Pre-rinse Cottons
The programs Cottons Hygiene
and Cottons Uni. allows you to add
a pre-rinse of the laundry.
The machine comes factory set with
this option off.
Pre-rinse Min. iron
The program Minimum iron allows a
pre-rinse of the laundry.
The machine comes factory set with
this option off.
Spin free of charge
When operated by a coin
mechanism, the program Spin can
be activated free of charge.
The machine comes factory set with
this option off.
Menu Settings - Supervisor level
68
 
						

							No detergent
If an external dispensing system is
fitted to the machine it will not be
accessed if No soap is selected.
You have the option to show the
Extra No Soap in the menu Extras.
The machine comes factory set with
this option off.
External dispenser
The washer is set up for connection
to an external dispensing system. To
use the external dispensing system
the setting must be adjusted/set
accordingly.
The machine comes factory set with
this option off.
Leaving the Settings menu
^Press back and confirm. The
display shows the main menu.
Menu Settings - Supervisor level
69
 
						

							70