Miele W 2809 I Operating Instructions

							Height 82.0 cm
Width 59.5 cm
Depth 57.5 cm
Depth with door open 118.0 cm
Weight 93 kg
Maximum floor load 1600 Newton (approx. 160 kg)
Capacity 5 kg dry laundry
Voltage see data plate
Connected load see data plate
Fuse rating see data plate / plug
Consumption data see Consumption data
Water flow pressure minimum 100 kPa (1 bar)
Water flow pressure maximum 1000 kPa (10 bar)
Inlet hose length 1.60 m
Drain hose length 1.50 m
Connection cable length 1.60 m
Drain pump head max. 1.00 m
Drain pump length max. 5.00 m
Test certificates awarded Radio / TV suppression, VDE
Technical data
61
 
						

							Programmable functions
for changing default settings
The programmable functions are used to alter the machines electronics to suit
changing requirements.
Programmable functions can be altered at any time.
 
						

							To access programmable functions
The programmable functions are
accessed via the
Start/Stopbutton
and the programme selector.
Before you begin, first ensure that:
–The washing machine is switched off.
–The machine is properly closed.
APress the
Start/Stopbutton and keep
it pressed in whilst carrying out steps
B-C.
BPress the
I-On/0-Offbutton in.
CAs soon as . . .
LanguageF...
. . . appears in the display, release
the
Start/Stopbutton.
To select a programmable function
DTurn the programme selector until the
programmable function you require
appears in the display.
EPress the
Start/Stopbutton to confirm
your selection.To alter a programmable function
You can see the different options
available for a programmable function
by turning the programme selector.
The option which is currently set will
have a tickLbeside it.
FTurn the programme selector until the
option you want appears in the
display.
GPress the
Start/Stopbutton to
activate this option.
To come out of programmable
functions
HTurn the programme selector until
BackAappears in the display.
IPress the
Start/Stopbutton.
LanguageF
The display can be set to appear in
one of several different languages.
The flagJafter the word
Language
acts as a guide to prevent a language
which will not be understood from
being set.
The language selected is saved to
memory.
Programmable functions
63
 
						

							Water plus
This programmable function is used
to select the water intake setting for
the
Water plusextra option.
There are three different options:
Water +
(the machine is delivered with this
option selected)
The water level is increased in the wash
and rinse stages.
Extra rinse
An extra rinse is introduced.
Water+ & Extra rinse
The water intake is increased in the
wash and rinse stages and an
additional rinse is also introduced.
Gentle action
Activating gentle action reduces the
drum action and is suitable for
washing slightly soiled items more
gently. It should be activated for
garments with a single bar under the
care label and for articles which feel
too hard after they have been dried.
Gentle action can be activated for the
Cottonsand theMinimum iron
programmes.
The washing machine is delivered with
the Gentle action setting deactivated.
Suds cooling
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Suds cooling takes place when
temperatures of 95°C and 75°C are
selected.
Suds cooling should be activated:
–
to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
–
where the drainage pipes do not
comply with DIN 1986.
The machine is delivered with Suds
cooling deactivated.
Programmable functions
64
 
						

							Code
A code can be used to lock the
electronics on the washing machine
to prevent it being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Code ...
^Press theStart/Stopbutton.
To activate the code
Activate
^Press theStart/Stopbutton.
The display will now request that a
code is entered.
To enter the code
The code is125and cannot be altered.
O__ __
^
Turn the programme selector until the
first number appears in the display.
^
Confirm your selection of the number
by pressing the
Start/Stopbutton.
^
Repeat the process until all three
numbers have been entered.
125
^Press theStart/Stopbutton.
The following will appear in the display:
Code activated
Once the machine is switched off, it
can only be used again if the code is
entered.
To use the washing machine when
the code is activated
When the machine is switched on
again, the display will request the code.
^Enter code 125 as described above
and confirm the entry.
The washing machine is now unlocked
and ready for use.
To deactivate the code
Make sure the washing machine is
switched off and the door is properly
closed. Press the
Start/Stopbutton and
keep it pressed in whilst you press the
l-On/0-Offbutton in.
As soon as . . .
O__ __
. . . appears in the display, release
the
Start/Stopbutton.
^
Now enter the code and press the
Start/Stopbutton.
^
Select
Codeand confirmDeactivate.
Programmable functions
65
 
						

							Temperature unit
You can chose for the temperature to
be displayed as
°C/Celsiusor
°F/Fahrenheit.
The machine is delivered with
°C/Celsius as the default setting.
Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
There are two volumes:
Normal
(the machine is delivered with this
option as the default setting.)
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
Loud
The buzzer sounds at maximum volume
Loudat the end of a programme or
when Rinse hold is reached.
Keypad tone
An audible tone sounds each time a
button is pressed.
The machine is delivered with the
keypad tone deactivated.
Brightness
There are ten different display
brightness settings.
The bar chart shows you the setting.
The machine is delivered with the
display brightness on setting 5.
This will change as soon as a different
setting is chosen.
Contrast
There are ten different display
contrast settings.
The bar chart shows you the setting.
The machine is delivered with the
display contrast on setting 5.
This will change as soon as a different
setting is chosen.
Programmable functions
66
 
						

							Standby display
To save energy, the display goes out
and the indicator light for the
Start/
Stop
button will start flashing slowly.
The display will always go out,
–if a programme is not selected within
10 minutes of the machine being
switched on.
–10 minutes after the end of a
programme.
Pressing one of the buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
On
The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.
Not in current prog.
(the machine is delivered with this
option selected)
The standby function is switched off.
The display will remain visible during a
programme.
Memory
The washing machine will store the
most recently selected settings
(programme, temperature, spin
speed and any extra options) in
memory once the programme has
started.
These settings will appear in the
display the next time the machine is
switched on.
The machine is delivered with the
memory function deactivated.
Anti-crease
Anti-crease helps prevent creasing if
laundry is not normally removed
immediately after the end of a
programme.
The drum will turn at intervals for up to
30 minutes after the programme has
finished.
The door can be opened and laundry
removed at any time during the
anti-crease phase.
On
(the machine is delivered with this
option selected)
Anti-crease is activated.
Off
Anti-crease is deactivated.
Programmable functions
67
 
						

							Alteration rights reserved/4906/W 2809iM.-Nr. 06 979 010 / 00
en-GB