Miele W 2839 User Manual

Control panel
Programme buttonswith indicator
lights
For selecting a washing programme.
Extra option buttonswith indicator
lights
Various extra options can be added
to the washing programmes.
PC / Optical interface
This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
button
For selecting delay start.Display withMenubuttons
See the next pages for more
information.
Start/Stopbutton
For starting the programme...

Display
The display is used for the following:
Selecting and displaying settings
–Temperature
–Spin speed
–Soak duration
–Delay start
–Cancelling a programme
–Safety lock
–Estimated programme durationSelecting programmes via the
display
By pressing theFurther programmes
button, you can select one of the
following programmes:
–Denim
–Hygiene
–Dark garments
–Curtains
–Pillows
–Silks
– Sportswear
– Outerwear
– Proofing
– Drain / Spin
– Separate rinse
– Starch
Selecting extra options via the
display
By...

Menubuttons
Various settings are made via theMenu
buttons.
They are used to alter or confirm the
value displayed above the vertical line.To alter a setting:
Cottons
Duration:1:49h
60°C 1600 rpm
Pressing the left handMenubutton
under60°Calters the temperature and
pressing the right handMenubutton
under1600 rpmalters the spin speed.
To confirm a setting:
Further programmes
Denim
ContinueOK
Pressing the left handMenubutton
underContinuecalls up further
programmes, and you can then confirm
your selection of...

Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
This washing machine has
undergone a thorough functional test
in the factory and there will be some
residual water in the drum from this
process.
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
amount of...

Reminder to remove transit bars
To avoid the risk of damage, the
transit bars must be removed before
the machine is used for the first time.
See "Installation and connection" for
instructions on how to do this.
After removing the transit bars (if this
has not already been done by your
fitter) press the right handMenu
button underOK.
Running your first programme
Your machine is now ready for the first
programme to be run.
15:00
Select programme
Press theCottonsprogramme button.
Press...

Energy and water consumption
–Water consumption and energy
usage are determined by the size of
the load.
To make the most out of your
machine, load the maximum dry load
for the programme you are using.
–Use theAutomaticandExpress
programmes for small loads.
–When smaller amounts of laundry are
washed using theCottons
programme, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the time
left shown in the display is adjusted
during the course of...

Brief instructions
The headings numbered,,
,...
show the operating sequence and can
be used as brief instructions.
Sort the laundry
Empty all pockets.
Foreign objects (e.g. nails,
coins, paper clips, etc.) can cause
damage to garments and
components in the machine.

Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
Badly soiled areas can be pre-treated
with liquid...

Switch on the washing machine
The interior drum lighting will come on.
All the programme indicator lights will
come on, and the display will ask you to
select a programme.

Select a programme
Press the button for the programme
you wish to run.
Now only the indicator light for the
selected programme will be lit up,
and this will be highlighted in the
display.Select a temperature / spin speed
The suggested temperature and/or spin
speed can be changed if required.
Cottons
Duration:1:49h
60°C1600 rpm
By...

Select any extra options by pressing
the appropriate button. The relevant
indicator light will come on to show
which extra option has been
selected.
Press theFurther extrasbutton to
select the following extra options
(depending on the programme
selected):Soak,Rinse holdandExtra
rinse.
Not all the extra options are suitable for
use with every programme.
You can only select extra options which
are compatible with the basic
programme being used.
Load the drum

Press theDoorbutton to open the
drum door....

Add detergent
When the door is closed, the load size
indicator will be replaced with the
detergent percentage display.
Detergent 75%
Back
The percentage shown relates to the
amount of detergent recommended by
the manufacturer on the packaging.
40%= Add slightly less than half
the amount recommended
50%= Add half the amount
recommended
60%= Add slightly more than half
the amount recommended
75%= Add three quarters of
the amount recommended
100%= the full amount of detergent
recommended
You also need to...