Mitsubishi Electric Diamond Plus 92 Users Manual

User’s Manual
 

Declaration of the Manufacturer
NEC-Mitsubishi Electric Visual
Systems Corporation
686-1, Nishioi Oi-Machi
Ashigarakami-gun
Kanagawa 258-8533, Japan
We hereby certify that the colour monitor
Diamond Pro 750SB / Diamond Plus 93SB
is in compliance with
Council Directive 73/23/EEC:
– EN 60950
Council Directive 89/336/EEC:
EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
and marked with
2    
User’s Manual
ENERGYSTA R Product
As an ENERGYSTA R Partner, NEC-Mitsubishi Electronics Display of America, Inc. has...


CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICE-
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK  DO NOT OPEN
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance...

4    User’s Manual
Contents
* Remember to save your original box and packing material to transport or ship the monitor.CD-ROM Your new Diamond Pro 750
SB / Diamond Plus 93SB monitor box* should contain the following:
• Diamond Pro 750SB / Diamond Plus 93SB Monitor with tilt/swivel base
• Power Cord
• Captive Signal Cable
• User’s Manual
• CD ROM with Setup Software, complete User’s Manual and other helpful files.
To see the User’s Manual, Acrobat Reader 4.0 must be installed on your PC.
Power Cord User’s...

Diamond Pro 750SB / Diamond Plus 93SB    5
Quick Start
To attach the Diamond Pro 750SB / Diamond Plus 93SB monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more information, refer to the display card
manual.
3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card
in your system (Figure A.1). Tighten all screws.
For the Mac: Connect the Diamond Pro...

Quick Start – continued
6    User’s Manual
Figure C.1 Power Outlet
Power
Cord
Power Button
Figure D.1
 

Controls
OSM (On-Screen Manager) control buttons on the front of the monitor function as follows:
Brightness/Contrast Controls
Brightness: Adjusts the overall image and background screen brightness.
Contrast: Adjusts the image brightness in relation to the background.
Degauss: Eliminates the buildup of stray magnetic fields which alter the correct scan of the electron beams
and affect the purity of the screen colours, focus and convergence. When activated, your screen image will
jump and waver a bit as...

Controls – continued
8    User’s Manual
Color Control System
Colour presets selects the desired colour setting. The bar is replaced by the colour setting choice. Each
colour setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting
will change from Kelvin to Custom except sRGB mode.
Red, Green, Blue: Color Control System decreases or increases the monitors red, green or blue colour guns
depending upon which is selected. The change in colour will appear on...

Diamond Pro 750SB / Diamond Plus 93SB    9
Controls – continued
Tools 2
Language: OSM controls menus are available in 6 languages.
OSM Position: You can choose where you would like the OSM controls menu to appear on your screen.
Selecting OSM Position allows you to manually adjust the OSM controls menu position from among Center,
Top left, Top right, Bottom left and Bottom right.
OSM Turn Off: The OSM controls menu will stay on as long as it is in use. In the OSM Turn Off sub-menu,
you can select how...

Recommended Use
10    User’s Manual
Safety Precautions and Maintenance
 DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.
 Do not spill any liquids into the cabinet or use your monitor near water.
 Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which
can be harmful or fatal or may cause...