Mitsubishi Electric Ldt323v Users Manual

English-17
English
Prevention of disconnection of HDMI cable
The HDMI cable must be secured by the clamper to prevent it from being disconnected accidentally.
R
B
G
H
V DVI IN
D-SUB IN D-SUB OUTHDMI
RS-232C IN
RS-232C OUT VIDEO IN
VIDEO OUT S-VIDEO
IN1 IN2 IN3
OUT R
L
Computer 
(DVI-D, HDMI)
Computer
(Analog RGB) LCD monitor (rear)
LCD monitor (second monitor)
DVD player (HDMI, BNC)
HD disk player (HDMI)
VCR (RCA) Stereo ampli er
External speakers
Clamper 
(Accessory) Cable Holder (Accessory)
Before...

English-18
RGB cable 
(Mini D-SUB 15-pin to  
Mini D-SUB 15-pin)
 To audio output
 To BNC output 
 RGB4 IN (R,G,B,H,V )
BNC cable 
(BNC x 5 to BNC x 5)
 RGB3 IN (D-SUB)
 RGB OUT (D-SUB)
 AUDIO IN1 (mini)
 AUDIO OUT (RCA)
Audio cable 
(ø 3.5 mm stereo mini)
 RGB3 IN (D-SUB)
 AUDIO IN2 (RCA)
RGB cable 
(Mini D-SUB 15-pin to  
Mini D-SUB 15-pin) 
RCA cable (audio)
 To D-SUB output 
LCD monitor (rear)
LCD monitor (second monitor) (Multi-connection) Computer
(Analog RGB) Computer
(Analog RGB)
LCD monitor (...

English-19
English
 RGB2 IN (DVI-D) RGB1 IN (HDMI) AUDIO IN1 (mini)
DVI-D cable 
HDMI cable
 To DVI-D output 
 To HDMI output 
 To Audio output 
Audio cable 
(ø3.5 mm stereo mini)
Computer
(DVI-D, HDMI)
LCD monitor
Connecting with a computer (digital connection)
Digital connection: 
  Connection via the RGB1 IN connector (HDMI) (1)  Connect an HDMI cable (commercially available) to the R GB1 IN connector. 
(2)  Select [RGB1] using the INPUT button on the monitor or th e HDMI button on the wireless...

English-20
BNC-RCA adaptor
HDMI cable  DVD/HD IN 
 ( Y·Pb·Pr, Y·Cb·Cr)
 AUDIO IN2 (RCA)
 RGB1 IN (HDMI)
 To D connector output 
 To video output 
 To HDMI output 
 To Audio output 
RCA cable (audio)
Signal cable 
(BNC x 3 to D connector) 
BNC cable 
(BNC x 3 to BNC x 3)
R
B
G
H
V DVI IN
D-SUB IN D-SUB OUTHDMI
RS-232C IN
RS-232C OUT VIDEO IN
VIDEO OUT S-VIDEO
IN1 IN2 IN3
OUT R
L
Connecting a video device (component video/HDMI device)
This monitor can be connected to a video device equipped with compon ent...

English-21
English
BNC cableRCA cable (audio)
 S-VIDEO IN AUDIO IN2
 AUDIO OUT VIDEO IN
 VIDEO OUT
 VIDEO IN
 To S video output  To video output  To Audio output 
 To Audio input 
RCA cable (audio) 
S video cable
BNC cable
R
B
G
H
V DVI IN
D-SUB IN D-SUB OUTHDMI
RS-232C IN
RS-232C OUT VIDEO IN
VIDEO OUT S-VIDEO
IN1 IN2 IN3
OUT R
L
Connecting a video device (composite video/S video device )/stereo ampli er
This monitor can be connected to a stereo ampli er.  
Refer to the user’s manual of the stereo ampli...

English-22
Connecting the power source
  The power outlet socket should be installed as near the equipment as possible and should be easily accessible.
  Fully insert the prongs into the power outlet socket.  
  Loose connection may cause noise. 
NOTE: 
Please refer to “Safety Precautions, Maintenance & Recomme nded Use” in this manual for proper selection of the AC power c ord.
 P-5  Connecting the power cord to the monitor
Use the clamper to secure the  
cable  rmly.Clamper (Accessory)
Cable holder...

English-23
English
Flow of How to Using
U-1
U-2
U-3
U-4
U-5
U-6
U-7
U-8U-9
U-10
Carry out as necessary
 Page 24
 Page 25
 Page 26
 Page 26
 Page 27
 Page 26
 Page 27
 Page 28
 Pages 28 to 29
 Pages 30 to 31
Turning on all the connected devices 
Selecting the video input
Controlling the external devices RGB3 and RGB4 onlyAuto-setup
Selecting the picture mode 
Screen adjustment
Picture adjustment
Volume control 
Schedule setting
Remote control
How to Use
 

English-24
 U-1   Turning on all the connected devicesWireless remote control 
Power Indicator
Status LED
Power ON Green 
Power OFF Red 
Power Standby when  
“SCHEDULE” is enable Red On
Green Blinking
Sleep mode Red, Green 
Diagnosis (Detecting failure) Red Blinking
* See troubleshooting on page 44.
Turning on external devices
1.  Turn on the connected devices such as 
the computer and VCR. 
Turning on the monitor
2. Turn on the Main Power Switch.  
  The power indicator turns on green.  
  The control...

English-25
English
You can select the desired video input using the wireless remote control or the INPUT button on the monitor.
1.  Select using the INPUT buttons on the wireless remote con trol.
  You can select the desired video input by pressing the corre sponding INPUT button on the wireless remote control. 
  Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D) , [RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO], and 
[VIDEO]. 
NOTE: 
The [CAT5] and [DISPL AY PORT] buttons don’t work. 
2....

English-26
You can control the externally connected devices to display images supplied from them.
 U-4   Auto-setup  Analog inputs only
The AUTO SETUP button on the wireless remote control or AUTO S ETUP in the OSD menu automatically adjusts the screen size, 
horizontal/vertical position, clock, clock phase, white l evel, and black level.
NOTE: 
The auto setup works on RGB3 and RGB4 only.
 U-5   Selecting the picture mode
Using the PICTURE MODE button on the wireless remote control, you can sele ct the...